lkml.org 
[lkml]   [2020]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] Add support for Realtek RTL838x/RTL839x switch SoCs
From
Date
Hello Bert,

thank you for your work. Here are some comments..

Am 15.12.20 um 19:35 schrieb Bert Vermeulen:
> Signed-off-by: Bert Vermeulen <bert@biot.com>
> ---
> arch/mips/Kbuild.platforms | 1 +
> arch/mips/Kconfig | 20 +++
> arch/mips/include/asm/mach-realtek/ioremap.h | 29 ++++
> arch/mips/include/asm/mach-realtek/irq.h | 69 ++++++++
> .../include/asm/mach-realtek/mach-realtek.h | 69 ++++++++
> arch/mips/realtek/Makefile | 1 +
> arch/mips/realtek/Platform | 6 +
> arch/mips/realtek/irq.c | 157 ++++++++++++++++++
> arch/mips/realtek/prom.c | 126 ++++++++++++++
> arch/mips/realtek/setup.c | 58 +++++++
> 10 files changed, 536 insertions(+)
> create mode 100644 arch/mips/include/asm/mach-realtek/ioremap.h
> create mode 100644 arch/mips/include/asm/mach-realtek/irq.h
> create mode 100644 arch/mips/include/asm/mach-realtek/mach-realtek.h
> create mode 100644 arch/mips/realtek/Makefile
> create mode 100644 arch/mips/realtek/Platform
> create mode 100644 arch/mips/realtek/irq.c
> create mode 100644 arch/mips/realtek/prom.c
> create mode 100644 arch/mips/realtek/setup.c
>
> diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
> index 5483e38b5dc7..e9adc6e7d1d3 100644
> --- a/arch/mips/Kbuild.platforms
> +++ b/arch/mips/Kbuild.platforms
> @@ -22,6 +22,7 @@ platform-$(CONFIG_NLM_COMMON) += netlogic/
> platform-$(CONFIG_PIC32MZDA) += pic32/
> platform-$(CONFIG_MACH_PISTACHIO) += pistachio/
> platform-$(CONFIG_RALINK) += ralink/
> +platform-$(CONFIG_MACH_REALTEK) += realtek/
> platform-$(CONFIG_MIKROTIK_RB532) += rb532/
> platform-$(CONFIG_SGI_IP22) += sgi-ip22/
> platform-$(CONFIG_SGI_IP27) += sgi-ip27/
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 6b762bebff33..58966ebaed5b 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -624,6 +624,26 @@ config RALINK
> select ARCH_HAS_RESET_CONTROLLER
> select RESET_CONTROLLER
>
> +config MACH_REALTEK
> + bool "Realtek RTL8380 based machines"
> + select DMA_NONCOHERENT
> + select IRQ_MIPS_CPU
> + select CSRC_R4K
> + select CEVT_R4K
> + select SYS_HAS_CPU_MIPS32_R1
> + select SYS_HAS_CPU_MIPS32_R2
> + select SYS_SUPPORTS_BIG_ENDIAN
> + select SYS_SUPPORTS_32BIT_KERNEL
> + select SYS_SUPPORTS_MIPS16
> + select SYS_SUPPORTS_MULTITHREADING
> + select SYS_SUPPORTS_VPE_LOADER
> + select SYS_HAS_EARLY_PRINTK
> + select SYS_HAS_EARLY_PRINTK_8250
> + select USE_GENERIC_EARLY_PRINTK_8250
> + select BOOT_RAW
> + select PINCTRL
> + select USE_OF
> +
> config SGI_IP22
> bool "SGI IP22 (Indy/Indigo2)"
> select ARC_MEMORY
> diff --git a/arch/mips/include/asm/mach-realtek/ioremap.h b/arch/mips/include/asm/mach-realtek/ioremap.h
> new file mode 100644
> index 000000000000..8847d0b99dad
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-realtek/ioremap.h
> @@ -0,0 +1,29 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef _RTL8380_IOREMAP_H_
> +#define _RTL8380_IOREMAP_H_
> +
> +static inline int is_rtl8380_internal_registers(phys_addr_t offset)
> +{
> + /* IO-Block */
> + if (offset >= 0xb8000000 && offset < 0xb9000000)
> + return 1;
> + /* Switch block */
> + if (offset >= 0xbb000000 && offset < 0xbc000000)
> + return 1;
> + return 0;
> +}

This part can be replaced with "ranges" device tree bus property.

> +static inline void __iomem *plat_ioremap(phys_addr_t offset, unsigned long size,
> + unsigned long flags)
> +{
> + if (is_rtl8380_internal_registers(offset))
> + return (void __iomem *)offset;
> + return NULL;
> +}
> +
> +static inline int plat_iounmap(const volatile void __iomem *addr)
> +{
> + return is_rtl8380_internal_registers((unsigned long)addr);
> +}
> +
> +#endif /* _RTL8380_IOREMAP_H_ */
> diff --git a/arch/mips/include/asm/mach-realtek/irq.h b/arch/mips/include/asm/mach-realtek/irq.h
> new file mode 100644
> index 000000000000..e2e2cd6dd27a
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-realtek/irq.h
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2006-2012 Tony Wu <tonywu@realtek.com>
> + * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
> + * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
> + * Copyright (C) 2020 John Crispin <john@phrozen.org>
> + */
> +
> +#ifndef _RTL8380_IRQ_H_
> +#define _RTL8380_IRQ_H_
> +
> +#define NR_IRQS 32
> +#include_next <irq.h>
> +
> +/* Global Interrupt Mask Register */
> +#define RTL8380_ICTL_GIMR 0x00
> +/* Global Interrupt Status Register */
> +#define RTL8380_ICTL_GISR 0x04
> +
> +/* Cascaded interrupts */
> +#define RTL8380_CPU_IRQ_SHARED0 (MIPS_CPU_IRQ_BASE + 2)
> +#define RTL8380_CPU_IRQ_UART (MIPS_CPU_IRQ_BASE + 3)
> +#define RTL8380_CPU_IRQ_SWITCH (MIPS_CPU_IRQ_BASE + 4)
> +#define RTL8380_CPU_IRQ_SHARED1 (MIPS_CPU_IRQ_BASE + 5)
> +#define RTL8380_CPU_IRQ_EXTERNAL (MIPS_CPU_IRQ_BASE + 6)
> +#define RTL8380_CPU_IRQ_COUNTER (MIPS_CPU_IRQ_BASE + 7)
> +
> +
> +/* Interrupt routing register */
> +#define RTL8380_IRR0 0x08
> +#define RTL8380_IRR1 0x0c
> +#define RTL8380_IRR2 0x10
> +#define RTL8380_IRR3 0x14
> +
> +/* Cascade map */
> +#define RTL8380_IRQ_CASCADE_UART0 2
> +#define RTL8380_IRQ_CASCADE_UART1 1
> +#define RTL8380_IRQ_CASCADE_TC0 5
> +#define RTL8380_IRQ_CASCADE_TC1 1
> +#define RTL8380_IRQ_CASCADE_OCPTO 1
> +#define RTL8380_IRQ_CASCADE_HLXTO 1
> +#define RTL8380_IRQ_CASCADE_SLXTO 1
> +#define RTL8380_IRQ_CASCADE_NIC 4
> +#define RTL8380_IRQ_CASCADE_GPIO_ABCD 4
> +#define RTL8380_IRQ_CASCADE_GPIO_EFGH 4
> +#define RTL8380_IRQ_CASCADE_RTC 4
> +#define RTL8380_IRQ_CASCADE_SWCORE 3
> +#define RTL8380_IRQ_CASCADE_WDT_IP1 4
> +#define RTL8380_IRQ_CASCADE_WDT_IP2 5
> +
> +/* Pack cascade map into interrupt routing registers */
> +#define RTL8380_IRR0_SETTING (\
> + (RTL8380_IRQ_CASCADE_UART0 << 28) | \
> + (RTL8380_IRQ_CASCADE_UART1 << 24) | \
> + (RTL8380_IRQ_CASCADE_TC0 << 20) | \
> + (RTL8380_IRQ_CASCADE_TC1 << 16) | \
> + (RTL8380_IRQ_CASCADE_OCPTO << 12) | \
> + (RTL8380_IRQ_CASCADE_HLXTO << 8) | \
> + (RTL8380_IRQ_CASCADE_SLXTO << 4) | \
> + (RTL8380_IRQ_CASCADE_NIC << 0))
> +#define RTL8380_IRR1_SETTING (\
> + (RTL8380_IRQ_CASCADE_GPIO_ABCD << 28) | \
> + (RTL8380_IRQ_CASCADE_GPIO_EFGH << 24) | \
> + (RTL8380_IRQ_CASCADE_RTC << 20) | \
> + (RTL8380_IRQ_CASCADE_SWCORE << 16))
> +#define RTL8380_IRR2_SETTING 0
> +#define RTL8380_IRR3_SETTING 0
> +
> +#endif /* _RTL8380_IRQ_H_ */
> diff --git a/arch/mips/include/asm/mach-realtek/mach-realtek.h b/arch/mips/include/asm/mach-realtek/mach-realtek.h
> new file mode 100644
> index 000000000000..bc6b1e57c00a
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-realtek/mach-realtek.h
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2006-2012 Tony Wu <tonywu@realtek.com>
> + * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
> + * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
> + * Copyright (C) 2020 John Crispin <john@phrozen.org>
> + */
> +
> +#ifndef _MACH_REALTEK_H_
> +#define _MACH_REALTEK_H_
> +
> +struct realtek_soc_info {
> + unsigned char *name;
> + unsigned int id;
> + unsigned int family;
> +};
> +
> +/* High 16 bits of MODEL_NAME_INFO register */
> +#define RTL8389_FAMILY_ID 0x8389
> +#define RTL8328_FAMILY_ID 0x8328
> +#define RTL8390_FAMILY_ID 0x8390
> +#define RTL8350_FAMILY_ID 0x8350
> +#define RTL8380_FAMILY_ID 0x8380
> +#define RTL8330_FAMILY_ID 0x8330
> +
> +/* Interrupt numbers/bits */
> +#define RTL8380_IRQ_UART0 31
> +#define RTL8380_IRQ_UART1 30
> +#define RTL8380_IRQ_TC0 29
> +#define RTL8380_IRQ_TC1 28
> +#define RTL8380_IRQ_OCPTO 27
> +#define RTL8380_IRQ_HLXTO 26
> +#define RTL8380_IRQ_SLXTO 25
> +#define RTL8380_IRQ_NIC 24
> +#define RTL8380_IRQ_GPIO_ABCD 23
> +#define RTL8380_IRQ_GPIO_EFGH 22
> +#define RTL8380_IRQ_RTC 21
> +#define RTL8380_IRQ_SWCORE 20
> +#define RTL8380_IRQ_WDT_IP1 19
> +#define RTL8380_IRQ_WDT_IP2 18
> +
> +
> +// TODO: move to DT
> +#define RTL8380_SWITCH_BASE ((volatile void *) 0xBB000000)
> +#define RTL8380_MODEL_NAME_INFO (RTL8380_SWITCH_BASE + 0x00D4)
> +#define RTL8390_MODEL_NAME_INFO (RTL8380_SWITCH_BASE + 0x0FF0)
> +
> +/* GMII pinmux on RTL838x */
> +#define RTL8380_GMII_INTF_SEL (RTL8380_SWITCH_BASE + 0x1000)
> +#define RTL8380_GMII_INTF_SEL_UART1 BIT(4)
> +#define RTL8380_GMII_INTF_SEL_JTAG (BIT(2) | BIT(3))
> +#define RTL8380_GMII_INTF_SEL_GMII (BIT(0) | BIT(1))
> +
> +/* GMII pinmux on RTL839x */
> +#define RTL8390_MAC_IF_CTRL (RTL8380_SWITCH_BASE + 0x04)
> +#define RTL8390_MAC_IF_CTRL_JTAG BIT(1)
> +#define RTL8390_MAC_IF_CTRL_UART BIT(0)
> +
> +/* Used to detect address length pin strapping on RTL833x/RTL838x */
> +#define RTL8380_INT_RW_CTRL (RTL8380_SWITCH_BASE + 0x58)
> +#define RTL8380_EXT_VERSION (RTL8380_SWITCH_BASE + 0xD0)
> +#define RTL8380_PLL_CML_CTRL (RTL8380_SWITCH_BASE + 0xFF8)
> +#define RTL8380_STRAP_DBG (RTL8380_SWITCH_BASE + 0x100C)
> +
> +/* Reset */
> +#define RTL8380_RST_GLB_CTRL_1 (RTL8380_SWITCH_BASE + 0x40)
> +#define RTL8390_RST_GLB_CTRL (RTL8380_SWITCH_BASE + 0x14)
> +
> +#endif /* _MACH_RTL8380_H_ */
> diff --git a/arch/mips/realtek/Makefile b/arch/mips/realtek/Makefile
> new file mode 100644
> index 000000000000..4616928e9883
> --- /dev/null
> +++ b/arch/mips/realtek/Makefile
> @@ -0,0 +1 @@
> +obj-y := setup.o prom.o irq.o
> diff --git a/arch/mips/realtek/Platform b/arch/mips/realtek/Platform
> new file mode 100644
> index 000000000000..6e6b29b82b81
> --- /dev/null
> +++ b/arch/mips/realtek/Platform
> @@ -0,0 +1,6 @@
> +#
> +# Realtek RTL8380 SoCs
> +#
> +platform-$(CONFIG_MACH_REALTEK) += realtek/
> +cflags-$(CONFIG_MACH_REALTEK) += -I$(srctree)/arch/mips/include/asm/mach-realtek/
> +load-$(CONFIG_MACH_REALTEK) += 0xffffffff80000000
> diff --git a/arch/mips/realtek/irq.c b/arch/mips/realtek/irq.c
> new file mode 100644
> index 000000000000..99c0adb56de3
> --- /dev/null
> +++ b/arch/mips/realtek/irq.c
> @@ -0,0 +1,157 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2006-2012 Tony Wu <tonywu@realtek.com>
> + * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
> + * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
> + * Copyright (C) 2020 John Crispin <john@phrozen.org>
> + */
> +
> +#include <linux/irqchip.h>
> +#include <linux/spinlock.h>
> +#include <linux/of_address.h>
> +#include <asm/irq_cpu.h>
> +#include <linux/of_irq.h>
> +#include <asm/cevt-r4k.h>
> +
> +#include <mach-realtek.h>
> +#include "irq.h"
> +
> +#define REG(x) (realtek_ictl_base + x)
> +
> +extern struct realtek_soc_info soc_info;
> +
> +static DEFINE_RAW_SPINLOCK(irq_lock);
> +static void __iomem *realtek_ictl_base;
> +
> +static void realtek_ictl_enable_irq(struct irq_data *i)
> +{
> + unsigned long flags;
> + u32 value;
> +
> + raw_spin_lock_irqsave(&irq_lock, flags);
> +
> + value = readl(REG(RTL8380_ICTL_GIMR));
> + value |= BIT(i->hwirq);
> + writel(value, REG(RTL8380_ICTL_GIMR));
> +
> + raw_spin_unlock_irqrestore(&irq_lock, flags);
> +}
> +
> +static void realtek_ictl_disable_irq(struct irq_data *i)
> +{
> + unsigned long flags;
> + u32 value;
> +
> + raw_spin_lock_irqsave(&irq_lock, flags);
> +
> + value = readl(REG(RTL8380_ICTL_GIMR));
> + value &= ~BIT(i->hwirq);
> + writel(value, REG(RTL8380_ICTL_GIMR));
> +
> + raw_spin_unlock_irqrestore(&irq_lock, flags);
> +}
> +
> +static struct irq_chip realtek_ictl_irq = {
> + .name = "rtl8380",
> + .irq_enable = realtek_ictl_enable_irq,
> + .irq_disable = realtek_ictl_disable_irq,
> + .irq_ack = realtek_ictl_disable_irq,
> + .irq_mask = realtek_ictl_disable_irq,
> + .irq_unmask = realtek_ictl_enable_irq,
> + .irq_eoi = realtek_ictl_enable_irq,
> +};
> +
> +static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
> +{
> + irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops irq_domain_ops = {
> + .map = intc_map,
> + .xlate = irq_domain_xlate_onecell,
> +};
> +
> +static void realtek_irq_dispatch(struct irq_desc *desc)
> +{
> + unsigned int pending = readl(REG(RTL8380_ICTL_GIMR)) & readl(REG(RTL8380_ICTL_GISR));
> +
> + if (pending) {
> + struct irq_domain *domain = irq_desc_get_handler_data(desc);
> + generic_handle_irq(irq_find_mapping(domain, __ffs(pending)));
> + } else {
> + spurious_interrupt();
> + }
> +}
> +
> +asmlinkage void plat_irq_dispatch(void)
> +{
> + unsigned int pending;
> +
> + pending = read_c0_cause() & read_c0_status() & ST0_IM;
> +
> + if (pending & CAUSEF_IP7)
> + do_IRQ(RTL8380_CPU_IRQ_COUNTER);
> +
> + else if (pending & CAUSEF_IP6)
> + do_IRQ(RTL8380_CPU_IRQ_EXTERNAL);
> +
> + else if (pending & CAUSEF_IP5)
> + do_IRQ(RTL8380_CPU_IRQ_SHARED1);
> +
> + else if (pending & CAUSEF_IP4)
> + do_IRQ(RTL8380_CPU_IRQ_SWITCH);
> +
> + else if (pending & CAUSEF_IP3)
> + do_IRQ(RTL8380_CPU_IRQ_UART);
> +
> + else if (pending & CAUSEF_IP2)
> + do_IRQ(RTL8380_CPU_IRQ_SHARED0);
> +
> + else
> + spurious_interrupt();
> +}
> +
> +static void __init icu_of_init(struct device_node *node, struct device_node *parent)
> +{
> + struct irq_domain *domain;
> +
> + domain = irq_domain_add_simple(node, 32, 0,
> + &irq_domain_ops, NULL);
> + irq_set_chained_handler_and_data(2, realtek_irq_dispatch, domain);
> + irq_set_chained_handler_and_data(5, realtek_irq_dispatch, domain);
> +
> + realtek_ictl_base = of_iomap(node, 0);
> + if (!realtek_ictl_base)
> + return;
> +
> + /* Disable all cascaded interrupts */
> + writel(0, REG(RTL8380_ICTL_GIMR));
> +
> + /* Set up interrupt routing */
> + writel(RTL8380_IRR0_SETTING, REG(RTL8380_IRR0));
> + writel(RTL8380_IRR1_SETTING, REG(RTL8380_IRR1));
> + writel(RTL8380_IRR2_SETTING, REG(RTL8380_IRR2));
> + writel(RTL8380_IRR3_SETTING, REG(RTL8380_IRR3));
> +
> + /* Clear timer interrupt */
> + write_c0_compare(0);
> +
> + /* Enable all CPU interrupts */
> + write_c0_status(read_c0_status() | ST0_IM);
> +
> + /* Enable timer0 and uart0 interrupts */
> + writel(BIT(RTL8380_IRQ_TC0) | BIT(RTL8380_IRQ_UART0), REG(RTL8380_ICTL_GIMR));
> +}
> +
> +static struct of_device_id __initdata of_irq_ids[] = {
> + { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
> + { .compatible = "realtek,rtl8380-intc", .data = icu_of_init },
> + {},
> +};
> +
> +void __init arch_init_irq(void)
> +{
> + of_irq_init(of_irq_ids);
> +}

this driver should go to drivers/irqchip/
please add irqchip subsystem maintainers to CC

> diff --git a/arch/mips/realtek/prom.c b/arch/mips/realtek/prom.c
> new file mode 100644
> index 000000000000..be9d34282969
> --- /dev/null
> +++ b/arch/mips/realtek/prom.c
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2006-2012 Tony Wu <tonywu@realtek.com>
> + * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
> + * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
> + * Copyright (C) 2020 John Crispin <john@phrozen.org>
> + */
> +
> +#include <linux/of.h>
> +#include <linux/of_fdt.h>
> +#include <linux/libfdt.h>
> +#include <asm/prom.h>
> +
> +#include <mach-realtek.h>
> +
> +extern char arcs_cmdline[];
> +extern const char __appended_dtb;
> +
> +struct realtek_soc_info soc_info;
> +const void *fdt;
> +
> +
> +const char *get_system_type(void)
> +{
> + return soc_info.name;
> +}
> +
> +void __init prom_free_prom_memory(void)
> +{
> + return;
> +}
> +
> +void __init device_tree_init(void)
> +{
> + if (!fdt_check_header(&__appended_dtb)) {
> + fdt = &__appended_dtb;
> + pr_info("Using appended Device Tree.\n");
> + }
> + initial_boot_params = (void *)fdt;
> + unflatten_and_copy_device_tree();
> +}
> +
> +static void __init prom_init_cmdline(void)
> +{
> + int argc = fw_arg0;
> + char **argv = (char **) KSEG1ADDR(fw_arg1);
> + int i;
> +
> + arcs_cmdline[0] = '\0';
> +
> + for (i = 0; i < argc; i++) {
> + char *p = (char *) KSEG1ADDR(argv[i]);
> +
> + if (CPHYSADDR(p) && *p) {
> + strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
> + strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
> + }
> + }
> + pr_info("Kernel command line: %s\n", arcs_cmdline);
> +}
> +
> +void __init prom_init(void)
> +{
> + void *dtb;
> + uint32_t model;
> +
> + /* uart0 */
> + setup_8250_early_printk_port(0xb8002000, 2, 0);
> +
> + model = readl(RTL8380_MODEL_NAME_INFO) >> 16;
> + if (model != 0x8330 && model != 0x8332 &&
> + model != 0x8380 && model != 0x8382 )
> + model = readl(RTL8390_MODEL_NAME_INFO) >> 16;
> +
> + soc_info.id = model;
> +
> + switch (model) {
> + case 0x8328:
> + soc_info.name="RTL8328";
> + soc_info.family = RTL8328_FAMILY_ID;
> + break;
> + case 0x8332:
> + soc_info.name="RTL8332";
> + soc_info.family = RTL8380_FAMILY_ID;
> + break;
> + case 0x8380:
> + soc_info.name="RTL8380";
> + soc_info.family = RTL8380_FAMILY_ID;
> + break;
> + case 0x8382:
> + soc_info.name="RTL8382";
> + soc_info.family = RTL8380_FAMILY_ID;
> + break;
> + case 0x8390:
> + soc_info.name="RTL8390";
> + soc_info.family = RTL8390_FAMILY_ID;
> + break;
> + case 0x8391:
> + soc_info.name="RTL8391";
> + soc_info.family = RTL8390_FAMILY_ID;
> + break;
> + case 0x8392:
> + soc_info.name="RTL8392";
> + soc_info.family = RTL8390_FAMILY_ID;
> + break;
> + case 0x8393:
> + soc_info.name="RTL8393";
> + soc_info.family = RTL8390_FAMILY_ID;
> + break;
> + default:
> + soc_info.name="DEFAULT";
> + soc_info.family = 0;
> + }
> + pr_info("SoC Type: %s\n", soc_info.name);
> + prom_init_cmdline();
> +
> + if (fw_passed_dtb)
> + dtb = (void *)fw_passed_dtb;
> + else if (__dtb_start != __dtb_end)
> + dtb = (void *)__dtb_start;
> + else
> + panic("no dtb found");
> +
> + __dt_setup_arch(dtb);
> +}

It will be better to use arch/mips/generic/init.c, in this case we can boot by using UHI boot
protocol, which is supported by barebox and u-boot.

If you will need help with barebox, please contact me.

> +
> diff --git a/arch/mips/realtek/setup.c b/arch/mips/realtek/setup.c
> new file mode 100644
> index 000000000000..00b6af2fd541
> --- /dev/null
> +++ b/arch/mips/realtek/setup.c
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (C) 2006-2012 Tony Wu <tonywu@realtek.com>
> + * Copyright (C) 2020 Birger Koblitz <mail@birger-koblitz.de>
> + * Copyright (C) 2020 Bert Vermeulen <bert@biot.com>
> + * Copyright (C) 2020 John Crispin <john@phrozen.org>
> + */
> +
> +#include <linux/of_fdt.h>
> +#include <asm/reboot.h>
> +#include <asm/time.h>
> +#include <mach-realtek.h>
> +
> +extern struct realtek_soc_info soc_info;
> +
> +static void realtek_restart(char *command)
> +{
> + if (soc_info.family == RTL8380_FAMILY_ID) {
> + /* Reset Global Control1 Register */
> + writel(1, RTL8380_RST_GLB_CTRL_1);
> + } else if (soc_info.family == RTL8390_FAMILY_ID) {
> + /* If calling reset vector fails, reset entire chip */
> + writel(0xFFFFFFFF, RTL8390_RST_GLB_CTRL);
> + }
> +}

this code should go to the drivers/reset/

part of it is probably register_restart_handler
See drivers/reset/reset-ath79.c

> +static void realtek_halt(void)
> +{
> + printk("System halted.\n");
> + while(1);
> +}
> +
> +void __init plat_mem_setup(void)
> +{
> + set_io_port_base(KSEG1);
> +
> + _machine_restart = realtek_restart;
> + _machine_halt = realtek_halt;
> +}
> +
> +void __init plat_time_init(void)
> +{
> + struct device_node *np;
> + u32 freq = 500000000;
> +
> + np = of_find_node_by_name(NULL, "cpus");
> + if (!np) {
> + pr_err("Missing 'cpus' DT node, using default frequency.");
> + } else {
> + if (of_property_read_u32(np, "frequency", &freq) < 0)
> + pr_err("No 'frequency' property in DT, using default.");
> + else
> + pr_info("CPU frequency from device tree: %d", freq);
> + of_node_put(np);
> + }
> +
> + mips_hpt_frequency = freq / 2;
> +}

Since the DTC is not optional and mach code will panic any way, it will be better to not care about
legacy things. Just mainline properly working device tree.

I assume, after applying all needed changes, there will be no files within
arch/mips/include/asm/mach-realtek :)

--
Regards,
Oleksij

\
 
 \ /
  Last update: 2020-12-15 23:14    [W:0.105 / U:1.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site