lkml.org 
[lkml]   [2020]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [net-next PATCH v2 08/14] net: mdiobus: Introduce fwnode_mdiobus_register()
On Tue, Dec 15, 2020 at 6:44 PM Calvin Johnson
<calvin.johnson@oss.nxp.com> wrote:
>
> Introduce fwnode_mdiobus_register() to register PHYs on the mdiobus.
> If the fwnode is DT node, then call of_mdiobus_register().
> If it is an ACPI node, then:
> - disable auto probing of mdiobus
> - register mdiobus
> - save fwnode to mdio structure
> - loop over child nodes & register a phy_device for each PHY

...

> +/**
> + * fwnode_mdiobus_register - Register mii_bus and create PHYs from fwnode
> + * @mdio: pointer to mii_bus structure
> + * @fwnode: pointer to fwnode of MDIO bus.
> + *
> + * This function registers the mii_bus structure and registers a phy_device
> + * for each child node of @fwnode.
> + */
> +int fwnode_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> + struct fwnode_handle *child;
> + unsigned long long addr;
> + acpi_status status;
> + int ret;
> +
> + if (is_of_node(fwnode)) {
> + return of_mdiobus_register(mdio, to_of_node(fwnode));
> + } else if (is_acpi_node(fwnode)) {

I would rather see this as simple as

if (is_of_node(fwnode))
return of_mdiobus_register(mdio, to_of_node(fwnode));
if (is_acpi_node(fwnode))
return acpi_mdiobus_register(mdio, fwnode);

where the latter one is defined somewhere in drivers/acpi/.

> + /* Mask out all PHYs from auto probing. */
> + mdio->phy_mask = ~0;
> + ret = mdiobus_register(mdio);
> + if (ret)
> + return ret;
> +
> + mdio->dev.fwnode = fwnode;
> + /* Loop over the child nodes and register a phy_device for each PHY */
> + fwnode_for_each_child_node(fwnode, child) {

> + status = acpi_evaluate_integer(ACPI_HANDLE_FWNODE(child),
> + "_ADR", NULL, &addr);
> + if (ACPI_FAILURE(status)) {

Isn't it fwnode_get_id() now?

> + pr_debug("_ADR returned %d\n", status);
> + continue;
> + }

> + if (addr < 0 || addr >= PHY_MAX_ADDR)
> + continue;

addr can't be less than 0.

> + ret = fwnode_mdiobus_register_phy(mdio, child, addr);
> + if (ret == -ENODEV)
> + dev_err(&mdio->dev,
> + "MDIO device at address %lld is missing.\n",
> + addr);
> + }
> + return 0;
> + }
> + return -EINVAL;
> +}

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-12-15 18:57    [W:0.171 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site