lkml.org 
[lkml]   [2020]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 2/8] dt-bindings: media: max9286: Document 'maxim,initial-reverse-channel-mV'
On Tue, Dec 15, 2020 at 6:08 AM Jacopo Mondi <jacopo@jmondi.org> wrote:
>
> Hi Geert,
>
> On Tue, Dec 15, 2020 at 12:44:17PM +0100, Geert Uytterhoeven wrote:
> > Hi Jacopo,
> >
> > On Tue, Dec 15, 2020 at 12:14 PM Jacopo Mondi <jacopo@jmondi.org> wrote:
> > > On Mon, Nov 30, 2020 at 03:00:48PM -0700, Rob Herring wrote:
> > > > On Mon, Nov 16, 2020 at 02:52:59PM +0100, Jacopo Mondi wrote:
> > > > > Document the 'initial-reverse-channel-mV' vendor property in the
> > > > > bindings document of the max9286 driver.
> > > > >
> > > > > The newly introduced property allows to specifying the initial
> > > > > configuration of the GMSL reverse control channel to accommodate
> > > > > remote serializers pre-programmed with the high threshold power
> > > > > supply noise immunity enabled.
> > > > >
> > > > > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
> > > > > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > > > > ---
> > > > > .../bindings/media/i2c/maxim,max9286.yaml | 23 +++++++++++++++++++
> > > > > 1 file changed, 23 insertions(+)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > > > index 9ea827092fdd..f61234d204fa 100644
> > > > > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > > > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > > > @@ -51,6 +51,26 @@ properties:
> > > > > '#gpio-cells':
> > > > > const: 2
> > > > >
> > > > > + maxim,initial-reverse-channel-mV:
> > > >
> > > > Use standard unit suffix.
> > > >
> > >
> > > Which one ? :)
> >
> > Documentation/devicetree/bindings/property-units.txt
> >
>
> Oh, I had no idea we have this.
> It's been here since a long time it seems, my bad
> Date: Mon Feb 8 10:55:55 2016
>
> > > I see in v5.10 one 'mV', three 'mv', one 'millivolts', several
> > > 'microvolts'.
> > >
> > > I'll go with the majority and make this
> > > 'maxim,initial-reverse-channel-mv'
> >
> > Wrong guess ;-)
> >
>
> Maybe a stupid question, but the fact only 'microvolts' is listed, is
> an implied suggestion to use 'millivolts' for simmetry or to express
> the value in micro volts ?

Use microvolts. Not having every possible unit is on purpose.

Rob

\
 
 \ /
  Last update: 2020-12-15 14:50    [W:0.099 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site