lkml.org 
[lkml]   [2020]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 0/4] Improve s0ix flows for systems i219LM
From
Date
Hi,

On 12/14/20 8:36 PM, Limonciello, Mario wrote:
>> Hi All,
>>
>> Sasha (and the other intel-wired-lan folks), thank you for investigating this
>> further and for coming up with a better solution.
>>
>> Mario, thank you for implementing the new scheme.
>>
>
> Sure.
>
>> I've tested this patch set on a Lenovo X1C8 with vPRO and AMT enabled in the
>> BIOS
>> (the previous issues were soon on a X1C7).
>>
>> I have good and bad news:
>>
>> The good news is that after reverting the
>> "e1000e: disable s0ix entry and exit flows for ME systems"
>> I can reproduce the original issue on the X1C8 (I no longer have
>> a X1C7 to test on).
>>
>> The bad news is that increasing the timeout to 1 second does
>> not fix the issue. Suspend/resume is still broken after one
>> suspend/resume cycle, as described in the original bug-report:
>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1865570
>>
>> More good news though, bumping the timeout to 250 poll iterations
>> (approx 2.5 seconds) as done in Aaron Ma's original patch for
>> this fixes this on the X1C8 just as it did on the X1C7
>> (it takes 2 seconds for ULP_CONFIG_DONE to clear).
>>
>> I've ran some extra tests and the poll loop succeeds on its
>> first iteration when an ethernet-cable is connected. It seems
>> that Lenovo's variant of the ME firmware waits up to 2 seconds
>> for a link, causing the long wait for ULP_CONFIG_DONE to clear.
>>
>> I think that for now the best fix would be to increase the timeout
>> to 2.5 seconds as done in Aaron Ma's original patch. Combined
>> with a broken-firmware warning when we waited longer then 1 second,
>> to make it clear that there is a firmware issue here and that
>> the long wait / slow resume is not the fault of the driver.
>>
>
> OK. I've submitted v5 with this suggestion.
>
>> ###
>>
>> I've added Mark Pearson from Lenovo to the Cc so that Lenovo
>> can investigate this issue further.
>>
>> Mark, this thread is about an issue with enabling S0ix support for
>> e1000e (i219lm) controllers. This was enabled in the kernel a
>> while ago, but then got disabled again on vPro / AMT enabled
>> systems because on some systems (Lenovo X1C7 and now also X1C8)
>> this lead to suspend/resume issues.
>>
>> When AMT is active then there is a handover handshake for the
>> OS to get access to the ethernet controller from the ME. The
>> Intel folks have checked and the Windows driver is using a timeout
>> of 1 second for this handshake, yet on Lenovo systems this is
>> taking 2 seconds. This likely has something to do with the
>> ME firmware on these Lenovo models, can you get the firmware
>> team at Lenovo to investigate this further ?
>>
>
> Please be very careful with nomenclature. AMT active, or AMT capable?
> The goal for this series is to support AMT capable systems with an i219LM
> where AMT has not been provisioned by the end user or organization.
> OEMs do not ship systems with AMD provisioned.

Ah, sorry about that. What I meant with "active" is set to "Enabled"
in the BIOS.

Also FWIW I just tried disabling AMT in the BIOS (using the "Disabled"
option, not the "Permanently Disabled" option) on the Lenovo X1 Carbon
8th gen, but that does not make a difference.

It still takes 2 seconds for ULP_CONFIG_DONE to clear even with AMT
set to "Disabled" in the BIOS :|

Regards,

Hans


\
 
 \ /
  Last update: 2020-12-15 13:32    [W:0.059 / U:25.892 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site