lkml.org 
[lkml]   [2020]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v8 12/18] PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map
Date
> -----Original Message-----
> From: Kishon Vijay Abraham I <kishon@ti.com>
> Sent: 11 November 2020 15:36
>
> The number of functions supported by the endpoint controller is
> configured in LM_EP_FUNC_CFG based on func_no member of struct
> pci_epf.
> Now that an endpoint function can be associated with two endpoint
> controllers (primary and secondary), just using func_no will
> not suffice as that will take into account only if the endpoint
> controller is associated with the primary interface of endpoint
> function. Instead use epc->function_num_map which will already have the
> configured functions information (irrespective of whether the endpoint
> controller is associated with primary or secondary interface).
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/pci/controller/cadence/pcie-cadence-ep.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
>

Reviewed-by: Tom Joseph <tjoseph@cadence.com>

\
 
 \ /
  Last update: 2020-12-14 19:00    [W:0.131 / U:1.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site