lkml.org 
[lkml]   [2020]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/1] dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
Date
The "#address-cells" and "#size-cells" are required only when the I2C
controller has subnodes. However, some I2C controllers defined in
"arch/arm64/boot/dts/amd/" and "arch/arm64/boot/dts/hisilicon/"
directories do not have child nodes. So they don't need these two
properties and don't write them explicitly.

Therefore, setting properties "#address-cells" and "#size-cells" as
"required" in this yaml file causes the following warnings:
/root/linux-next/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dt.yaml: \
i2c@f7100000: '#address-cells' is a required property
/root/linux-next/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dt.yaml: \
i2c@f7100000: '#size-cells' is a required property

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml | 8 --------
1 file changed, 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
index 4f746bef23742e9..c22b66b6219eaa3 100644
--- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -101,8 +101,6 @@ unevaluatedProperties: false
required:
- compatible
- reg
- - "#address-cells"
- - "#size-cells"
- interrupts

examples:
@@ -110,8 +108,6 @@ examples:
i2c@f0000 {
compatible = "snps,designware-i2c";
reg = <0xf0000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <11>;
clock-frequency = <400000>;
};
@@ -119,8 +115,6 @@ examples:
i2c@1120000 {
compatible = "snps,designware-i2c";
reg = <0x1120000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <12 1>;
clock-frequency = <400000>;
i2c-sda-hold-time-ns = <300>;
@@ -148,8 +142,6 @@ examples:
reg = <0x100400 0x100>, <0x198 0x8>;
pinctrl-0 = <&i2c_pins>;
pinctrl-names = "default";
- #address-cells = <1>;
- #size-cells = <0>;
interrupts = <8>;
clocks = <&ahb_clk>;
};
--
1.8.3

\
 
 \ /
  Last update: 2020-12-14 13:47    [W:0.038 / U:2.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site