lkml.org 
[lkml]   [2020]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 1/6] mmc: core: Add helper for parsing clock pha se properties


On Tue, 15 Dec 2020, at 02:18, Ulf Hansson wrote:
> On Tue, 8 Dec 2020 at 02:26, Andrew Jeffery <andrew@aj.id.au> wrote:
> >
> > Drivers for MMC hosts that accept phase corrections can take advantage
> > of the helper by embedding a mmc_clk_phase_map_t object in their
> > private data and invoking mmc_of_parse_clk_phase() to extract phase
> > parameters. It is the responsibility of the host driver to translate and
> > apply the extracted values to hardware as required.
> >
> > Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
> > ---
> > drivers/mmc/core/host.c | 44 ++++++++++++++++++++++++++++++++++++++++
> > include/linux/mmc/host.h | 17 ++++++++++++++++
> > 2 files changed, 61 insertions(+)
> >
> > diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> > index 96b2ca1f1b06..b1697f00c4b5 100644
> > --- a/drivers/mmc/core/host.c
> > +++ b/drivers/mmc/core/host.c
> > @@ -163,6 +163,50 @@ static void mmc_retune_timer(struct timer_list *t)
> > mmc_retune_needed(host);
> > }
> >
> > +static void mmc_of_parse_timing_phase(struct device *dev, const char *prop,
> > + struct mmc_clk_phase *phase)
> > +{
> > + int degrees[2] = {0};
> > + int rc;
> > +
> > + rc = device_property_read_u32_array(dev, prop, degrees, 2);
> > + phase->valid = !rc;
> > + if (phase->valid) {
> > + phase->in_deg = degrees[0];
> > + phase->out_deg = degrees[1];
> > + }
> > +}
> > +
> > +void
> > +mmc_of_parse_clk_phase(struct mmc_host *host, mmc_clk_phase_map_t map)
>
> Would you mind to change to pass a "struct mmc_clk_phase_map *map" to this?
>
> See more comments below.
>
> > +{
> > + struct device *dev = host->parent;
> > +
> > + mmc_of_parse_timing_phase(dev, "clk-phase-legacy",
> > + &map[MMC_TIMING_LEGACY]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs",
> > + &map[MMC_TIMING_MMC_HS]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-sd-hs",
> > + &map[MMC_TIMING_SD_HS]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr12",
> > + &map[MMC_TIMING_UHS_SDR12]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr25",
> > + &map[MMC_TIMING_UHS_SDR25]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr50",
> > + &map[MMC_TIMING_UHS_SDR50]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr104",
> > + &map[MMC_TIMING_UHS_SDR104]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-uhs-ddr50",
> > + &map[MMC_TIMING_UHS_DDR50]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-mmc-ddr52",
> > + &map[MMC_TIMING_MMC_DDR52]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs200",
> > + &map[MMC_TIMING_MMC_HS200]);
> > + mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs400",
> > + &map[MMC_TIMING_MMC_HS400]);
> > +}
> > +EXPORT_SYMBOL(mmc_of_parse_clk_phase);
> > +
> > /**
> > * mmc_of_parse() - parse host's device-tree node
> > * @host: host whose node should be parsed.
> > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> > index 01bba36545c5..bc4731c9738f 100644
> > --- a/include/linux/mmc/host.h
> > +++ b/include/linux/mmc/host.h
> > @@ -79,6 +79,22 @@ struct mmc_ios {
> > bool enhanced_strobe; /* hs400es selection */
> > };
> >
> > +struct mmc_clk_phase {
> > + bool valid;
> > + u16 in_deg;
> > + u16 out_deg;
> > +};
> > +
> > +/*
> > + * Define a type to map between bus timings and phase correction values. To
> > + * avoid bloat in struct mmc_host we leave it to the host driver to define the
> > + * phase map object in its private data if it supports phase correction.
> > + * However, mmc_of_parse_clk_phase() is provided by the mmc core and needs the
> > + * provided array to be correctly sized, so typedef an appropriately sized
> > + * array to minimise the chance that the wrong size object is passed.
> > + */
> > +typedef struct mmc_clk_phase mmc_clk_phase_map_t[MMC_TIMING_MMC_HS400 + 1];
> > +
>
> Nitpick: I would appreciate if we could avoid using "typedefs", as I
> think they in many cases makes the code harder to read. How about
> doing this instead?
>
> #define MMC_NUM_CLK_PHASES (MMC_TIMING_MMC_HS400 + 1)
>
> struct mmc_clk_phase_map {
> struct mmc_clk_phase phase[MMC_NUM_CLK_PHASES];
> };
>
> [...]

Right; I experimented with that approach and felt it was kinda clunky (hence
the typedef), but I'll respin the series doing as such.

Thanks,

Andrew

\
 
 \ /
  Last update: 2020-12-15 00:35    [W:0.047 / U:1.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site