lkml.org 
[lkml]   [2020]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: linux-next: manual merge of the amdgpu tree with the pci tree
On Mon, Dec 14, 2020 at 6:16 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
>
> On Tue, Dec 15, 2020 at 07:34:31AM +1100, Stephen Rothwell wrote:
> > Hi all,
> >
> > On Tue, 8 Dec 2020 13:56:20 +1100 Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> > >
> > > Today's linux-next merge of the amdgpu tree got a conflict in:
> > >
> > > drivers/pci/pcie/err.c
> > >
> > > between commits:
> > >
> > > 8f1bbfbc3596 ("PCI/ERR: Rename reset_link() to reset_subordinates()")
> > > 0791721d8007 ("PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()")
> > > 05e9ae19ab83 ("PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery()")
> > >
> > > from the pci tree and commit:
> > >
> > > 36a8901e900a ("PCI/ERR: Fix reset logic in pcie_do_recovery() call")
> > >
> > > from the amdgpu tree.
> > >
> > > I fixed it up (I think - see below) and can carry the fix as
> > > necessary. This is now fixed as far as linux-next is concerned, but any
> > > non trivial conflicts should be mentioned to your upstream maintainer
> > > when your tree is submitted for merging. You may also want to consider
> > > cooperating with the maintainer of the conflicting tree to minimise any
> > > particularly complex conflicts.
>
> Huh. It's sub-optimal to change this core code via both the PCI and
> the amdgpu tree, with no heads-up to me.
>
> 400b308d388a ("PCI/ERR: Fix reset logic in pcie_do_recovery() call")
> (apparently in the amdgpu tree) doesn't have a Link: tag to the
> posting of the patch, where there was quite a lot of useful discussion
> that should be connected somehow.
>
> I think the posting was
> https://lore.kernel.org/r/cbba08a5e9ca62778c8937f44eda2192a2045da7.1595617529.git.sathyanarayanan.kuppuswamy@linux.intel.com
>
> I had deferred merging this patch so I could merge Sean's RCEC work
> first, and then resolve the conflict when merging *this* patch.
>

I don't plan to merge this upstream via my tree. I was just carrying
it in my drm-next branch because we have a number of users that depend
on it for working DPC and a number of people use this branch for
testing.

Alex


> > > diff --cc drivers/pci/pcie/err.c
> > > index 510f31f0ef6d,4a2735b70fa6..000000000000
> > > --- a/drivers/pci/pcie/err.c
> > > +++ b/drivers/pci/pcie/err.c
> > > @@@ -146,61 -146,49 +146,82 @@@ out
> > > return 0;
> > > }
> > >
> > > +/**
> > > + * pci_walk_bridge - walk bridges potentially AER affected
> > > + * @bridge: bridge which may be a Port, an RCEC, or an RCiEP
> > > + * @cb: callback to be called for each device found
> > > + * @userdata: arbitrary pointer to be passed to callback
> > > + *
> > > + * If the device provided is a bridge, walk the subordinate bus, including
> > > + * any bridged devices on buses under this bus. Call the provided callback
> > > + * on each device found.
> > > + *
> > > + * If the device provided has no subordinate bus, e.g., an RCEC or RCiEP,
> > > + * call the callback on the device itself.
> > > + */
> > > +static void pci_walk_bridge(struct pci_dev *bridge,
> > > + int (*cb)(struct pci_dev *, void *),
> > > + void *userdata)
> > > +{
> > > + if (bridge->subordinate)
> > > + pci_walk_bus(bridge->subordinate, cb, userdata);
> > > + else
> > > + cb(bridge, userdata);
> > > +}
> > > +
> > > pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> > > - pci_channel_state_t state,
> > > - pci_ers_result_t (*reset_link)(struct pci_dev *pdev))
> > > + pci_channel_state_t state,
> > > + pci_ers_result_t (*reset_subordinates)(struct pci_dev *pdev))
> > > {
> > > + int type = pci_pcie_type(dev);
> > > + struct pci_dev *bridge;
> > > pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
> > > - struct pci_bus *bus;
> > > + struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> > >
> > > /*
> > > - * Error recovery runs on all subordinates of the first downstream port.
> > > - * If the downstream port detected the error, it is cleared at the end.
> > > + * If the error was detected by a Root Port, Downstream Port, RCEC,
> > > + * or RCiEP, recovery runs on the device itself. For Ports, that
> > > + * also includes any subordinate devices.
> > > + *
> > > + * If it was detected by another device (Endpoint, etc), recovery
> > > + * runs on the device and anything else under the same Port, i.e.,
> > > + * everything under "bridge".
> > > */
> > > - if (!(pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
> > > - pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM))
> > > - dev = dev->bus->self;
> > > - bus = dev->subordinate;
> > > + if (type == PCI_EXP_TYPE_ROOT_PORT ||
> > > + type == PCI_EXP_TYPE_DOWNSTREAM ||
> > > + type == PCI_EXP_TYPE_RC_EC ||
> > > + type == PCI_EXP_TYPE_RC_END)
> > > + bridge = dev;
> > > + else
> > > + bridge = pci_upstream_bridge(dev);
> > >
> > > - pci_dbg(dev, "broadcast error_detected message\n");
> > > + pci_dbg(bridge, "broadcast error_detected message\n");
> > > if (state == pci_channel_io_frozen) {
> > > - pci_walk_bus(bus, report_frozen_detected, &status);
> > > + pci_walk_bridge(bridge, report_frozen_detected, &status);
> > > + /*
> > > + * After resetting the link using reset_link() call, the
> > > + * possible value of error status is either
> > > + * PCI_ERS_RESULT_DISCONNECT (failure case) or
> > > + * PCI_ERS_RESULT_NEED_RESET (success case).
> > > + * So ignore the return value of report_error_detected()
> > > + * call for fatal errors.
> > > + *
> > > + * In EDR mode, since AER and DPC Capabilities are owned by
> > > + * firmware, reported_error_detected() will return error
> > > + * status PCI_ERS_RESULT_NO_AER_DRIVER. Continuing
> > > + * pcie_do_recovery() with error status as
> > > + * PCI_ERS_RESULT_NO_AER_DRIVER will report recovery failure
> > > + * irrespective of recovery status. But successful reset_link()
> > > + * call usually recovers all fatal errors. So ignoring the
> > > + * status result of report_error_detected() also helps EDR based
> > > + * error recovery.
> > > + */
> > > - status = reset_link(dev);
> > > + status = reset_subordinates(bridge);
> > > - if (status != PCI_ERS_RESULT_RECOVERED) {
> > > + if (status == PCI_ERS_RESULT_RECOVERED) {
> > > + status = PCI_ERS_RESULT_NEED_RESET;
> > > + } else {
> > > + status = PCI_ERS_RESULT_DISCONNECT;
> > > - pci_warn(dev, "link reset failed\n");
> > > + pci_warn(bridge, "subordinate device reset failed\n");
> > > goto failed;
> > > }
> > > } else {
> > > @@@ -215,13 -203,25 +236,25 @@@
> > >
> > > if (status == PCI_ERS_RESULT_NEED_RESET) {
> > > /*
> > > - * TODO: Should call platform-specific
> > > - * functions to reset slot before calling
> > > - * drivers' slot_reset callbacks?
> > > + * TODO: Optimize the call to pci_reset_bus()
> > > + *
> > > + * There are two components to pci_reset_bus().
> > > + *
> > > + * 1. Do platform specific slot/bus reset.
> > > + * 2. Save/Restore all devices in the bus.
> > > + *
> > > + * For hotplug capable devices and fatal errors,
> > > + * device is already in reset state due to link
> > > + * reset. So repeating platform specific slot/bus
> > > + * reset via pci_reset_bus() call is redundant. So
> > > + * can optimize this logic and conditionally call
> > > + * pci_reset_bus().
> > > */
> > > + pci_reset_bus(dev);
> > > +
> > > status = PCI_ERS_RESULT_RECOVERED;
> > > - pci_dbg(dev, "broadcast slot_reset message\n");
> > > - pci_walk_bus(bus, report_slot_reset, &status);
> > > + pci_dbg(bridge, "broadcast slot_reset message\n");
> > > + pci_walk_bridge(bridge, report_slot_reset, &status);
> > > }
> > >
> > > if (status != PCI_ERS_RESULT_RECOVERED)
> >
> > Just a reminder that this conflict still exists (the amdgpu tree commit
> > is now 400b308d388a).
> >
> > --
> > Cheers,
> > Stephen Rothwell
>
>

\
 
 \ /
  Last update: 2020-12-15 00:21    [W:0.054 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site