lkml.org 
[lkml]   [2020]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 08/15] dt-bindings: media: Add A31 MIPI CSI-2 bindings documentation
On Mon, Dec 14, 2020 at 12:35:09PM +0100, Maxime Ripard wrote:
> On Fri, Dec 11, 2020 at 04:57:01PM +0100, Paul Kocialkowski wrote:
> > This introduces YAML bindings documentation for the A31 MIPI CSI-2
> > controller.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > ---
> > .../media/allwinner,sun6i-a31-mipi-csi2.yaml | 149 ++++++++++++++++++
> > 1 file changed, 149 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > new file mode 100644
> > index 000000000000..4d0bab541da1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
> > @@ -0,0 +1,149 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings
> > +
> > +maintainers:
> > + - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - const: allwinner,sun6i-a31-mipi-csi2
> > + - items:
> > + - const: allwinner,sun8i-v3s-mipi-csi2
> > + - const: allwinner,sun6i-a31-mipi-csi2
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Bus Clock
> > + - description: Module Clock
> > +
> > + clock-names:
> > + items:
> > + - const: bus
> > + - const: mod
> > +
> > + phys:
> > + items:
> > + - description: MIPI D-PHY
>
> This should be written as
>
> phys:
> description: ...

Then you need 'maxItems: 1' or just that. I guess there is some value in
saying it is a D-PHY.

Rob

\
 
 \ /
  Last update: 2020-12-15 00:18    [W:0.061 / U:1.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site