lkml.org 
[lkml]   [2020]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.9 107/152] spi: imx: fix the unbalanced spi runtime pm management
Date
From: Clark Wang <xiaoning.wang@nxp.com>

[ Upstream commit 7cd71202961090d8f2d2b863ec66b25ae43e1d39 ]

If set active without increase the usage count of pm, the dont use
autosuspend function will call the suspend callback to close the two
clocks of spi because the usage count is reduced to -1.
This will cause the warning dump below when the defer-probe occurs.

[ 129.379701] ecspi2_root_clk already disabled
[ 129.384005] WARNING: CPU: 1 PID: 33 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0

So add the get noresume function before set active.

Fixes: 43b6bf406cd0 spi: imx: fix runtime pm support for !CONFIG_PM
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20201124085247.18025-1-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-imx.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 9aac515b718c8..91578103a3ca9 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1684,6 +1684,7 @@ static int spi_imx_probe(struct platform_device *pdev)

pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT);
pm_runtime_use_autosuspend(spi_imx->dev);
+ pm_runtime_get_noresume(spi_imx->dev);
pm_runtime_set_active(spi_imx->dev);
pm_runtime_enable(spi_imx->dev);

--
2.27.0


\
 
 \ /
  Last update: 2020-12-01 10:14    [W:0.457 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site