lkml.org 
[lkml]   [2020]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND] tty/serial/imx: Enable TXEN bit in imx_poll_init().
On Wed, Dec 02, 2020 at 07:03:08AM +0800, jiladahe1997 wrote:
> From: Mingrui Ren <jiladahe1997@gmail.com>
>
> As described in Documentation, poll_init() is called by kgdb to initialize
> hardware which supports both poll_put_char() and poll_get_char().
>
> It's necessary to enable TXEN bit, otherwise, it will cause hardware fault
> and kernel panic when calling imx_poll_put_char().
>
> Generally, if use /dev/ttymxc0 as kgdb console as well as system
> console, ttymxc0 is initialized early by system console which does enable
> TXEN bit.But when use /dev/ttymxc1 as kgbd console, ttymxc1 is only
> initialized by imx_poll_init() cannot enable the TXEN bit, which will
> cause kernel panic.
>
> Signed-off-by: Mingrui Ren <jiladahe1997@gmail.com>
> ---
> Hi, thanks for your reply, and sorry for sending two identical emails.
> The email service I used before seems to have some problems,
> so I switched to gmail.This is the "correct" version, please check.
>
> drivers/tty/serial/imx.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index 43c6d7142fdd..7c665db3d897 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -1829,7 +1829,7 @@ static int imx_uart_poll_init(struct uart_port *port)
> ucr1 |= UCR1_UARTEN;
> ucr1 &= ~(UCR1_TRDYEN | UCR1_RTSDEN | UCR1_RRDYEN);
>
> - ucr2 |= UCR2_RXEN;
> + ucr2 |= UCR2_RXEN|UCR2_TXEN;

Didn't checkpatch complain about this? Please use ' ' characters around
the '|' character.

thanks,

greg k-h

\
 
 \ /
  Last update: 2020-12-01 17:47    [W:0.052 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site