lkml.org 
[lkml]   [2020]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARC: mm: fix spelling mistakes
Date
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
---
arch/arc/mm/tlb.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index c340acd989a0..9bb3c24f3677 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -30,14 +30,14 @@
* -Changes related to MMU v2 (Rel 4.8)
*
* Vineetg: Aug 29th 2008
- * -In TLB Flush operations (Metal Fix MMU) there is a explict command to
+ * -In TLB Flush operations (Metal Fix MMU) there is a explicit command to
* flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
* it fails. Thus need to load it with ANY valid value before invoking
* TLBIVUTLB cmd
*
* Vineetg: Aug 21th 2008:
* -Reduced the duration of IRQ lockouts in TLB Flush routines
- * -Multiple copies of TLB erase code seperated into a "single" function
+ * -Multiple copies of TLB erase code separated into a "single" function
* -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
* in interrupt-safe region.
*
@@ -66,7 +66,7 @@
*
* Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
* much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
- * Given this, the thrasing problem should never happen because once the 3
+ * Given this, the thrashing problem should never happen because once the 3
* J-TLB entries are created (even though 3rd will knock out one of the prev
* two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
*
@@ -127,7 +127,7 @@ static void utlb_invalidate(void)
* There was however an obscure hardware bug, where uTLB flush would
* fail when a prior probe for J-TLB (both totally unrelated) would
* return lkup err - because the entry didn't exist in MMU.
- * The Workround was to set Index reg with some valid value, prior to
+ * The Workaround was to set Index reg with some valid value, prior to
* flush. This was fixed in MMU v3
*/
unsigned int idx;
@@ -272,7 +272,7 @@ noinline void local_flush_tlb_all(void)
}

/*
- * Flush the entrie MM for userland. The fastest way is to move to Next ASID
+ * Flush the entire MM for userland. The fastest way is to move to Next ASID
*/
noinline void local_flush_tlb_mm(struct mm_struct *mm)
{
@@ -303,7 +303,7 @@ noinline void local_flush_tlb_mm(struct mm_struct *mm)
* Difference between this and Kernel Range Flush is
* -Here the fastest way (if range is too large) is to move to next ASID
* without doing any explicit Shootdown
- * -In case of kernel Flush, entry has to be shot down explictly
+ * -In case of kernel Flush, entry has to be shot down explicitly
*/
void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end)
@@ -620,7 +620,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
* Super Page size is configurable in hardware (4K to 16M), but fixed once
* RTL builds.
*
- * The exact THP size a Linx configuration will support is a function of:
+ * The exact THP size a Linux configuration will support is a function of:
* - MMU page size (typical 8K, RTL fixed)
* - software page walker address split between PGD:PTE:PFN (typical
* 11:8:13, but can be changed with 1 line)
@@ -698,7 +698,7 @@ void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,

#endif

-/* Read the Cache Build Confuration Registers, Decode them and save into
+/* Read the Cache Build Configuration Registers, Decode them and save into
* the cpuinfo structure for later use.
* No Validation is done here, simply read/convert the BCRs
*/
@@ -803,13 +803,13 @@ void arc_mmu_init(void)
pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));

/*
- * Can't be done in processor.h due to header include depenedencies
+ * Can't be done in processor.h due to header include dependencies
*/
BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE));

/*
* stack top size sanity check,
- * Can't be done in processor.h due to header include depenedencies
+ * Can't be done in processor.h due to header include dependencies
*/
BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));

@@ -881,7 +881,7 @@ void arc_mmu_init(void)
* the duplicate one.
* -Knob to be verbose abt it.(TODO: hook them up to debugfs)
*/
-volatile int dup_pd_silent; /* Be slient abt it or complain (default) */
+volatile int dup_pd_silent; /* Be silent abt it or complain (default) */

void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
struct pt_regs *regs)
@@ -948,7 +948,7 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,

/***********************************************************************
* Diagnostic Routines
- * -Called from Low Level TLB Hanlders if things don;t look good
+ * -Called from Low Level TLB Handlers if things don;t look good
**********************************************************************/

#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
--
2.25.1
\
 
 \ /
  Last update: 2020-11-09 14:28    [W:0.077 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site