lkml.org 
[lkml]   [2020]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/4] pinctrl: amd: fix incorrect way to disable debounce filter
From
Date
Hi,

On 11/6/20 12:19 AM, Coiby Xu wrote:
> The correct way to disable debounce filter is to clear bit 5 and 6
> of the register.
>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Link: https://lore.kernel.org/linux-gpio/df2c008b-e7b5-4fdd-42ea-4d1c62b52139@redhat.com/
> Signed-off-by: Coiby Xu <coiby.xu@gmail.com>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans

> ---
> drivers/pinctrl/pinctrl-amd.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
> index 9a760f5cd7ed..d6b2b4bd337c 100644
> --- a/drivers/pinctrl/pinctrl-amd.c
> +++ b/drivers/pinctrl/pinctrl-amd.c
> @@ -166,14 +166,14 @@ static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
> pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
> pin_reg |= BIT(DB_TMR_LARGE_OFF);
> } else {
> - pin_reg &= ~DB_CNTRl_MASK;
> + pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
> ret = -EINVAL;
> }
> } else {
> pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
> pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
> pin_reg &= ~DB_TMR_OUT_MASK;
> - pin_reg &= ~DB_CNTRl_MASK;
> + pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
> }
> writel(pin_reg, gpio_dev->base + offset * 4);
> raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
>

\
 
 \ /
  Last update: 2020-11-09 14:51    [W:0.334 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site