lkml.org 
[lkml]   [2020]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH AUTOSEL 5.9 02/35] arm64: dts: meson-axg: add USB nodes
On Tue, Nov 03, 2020 at 09:55:45AM +0100, Neil Armstrong wrote:
>On 03/11/2020 02:18, Sasha Levin wrote:
>> From: Neil Armstrong <narmstrong@baylibre.com>
>>
>> [ Upstream commit 1b208bab34dc3f4ef8f408105017d4a7b72b2a2f ]
>>
>> This adds the USB Glue node, with the USB2 & USB3 controllers along the single
>> USB2 PHY node.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
>> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>> arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 50 ++++++++++++++++++++++
>> 1 file changed, 50 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> index b9efc8469265d..fae48efae83e9 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
>> @@ -171,6 +171,46 @@ soc {
>> #size-cells = <2>;
>> ranges;
>>
>> + usb: usb@ffe09080 {
>> + compatible = "amlogic,meson-axg-usb-ctrl";
>> + reg = <0x0 0xffe09080 0x0 0x20>;
>> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
>> + clock-names = "usb_ctrl", "ddr";
>> + resets = <&reset RESET_USB_OTG>;
>> +
>> + dr_mode = "otg";
>> +
>> + phys = <&usb2_phy1>;
>> + phy-names = "usb2-phy1";
>> +
>> + dwc2: usb@ff400000 {
>> + compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
>> + reg = <0x0 0xff400000 0x0 0x40000>;
>> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clkc CLKID_USB1>;
>> + clock-names = "otg";
>> + phys = <&usb2_phy1>;
>> + dr_mode = "peripheral";
>> + g-rx-fifo-size = <192>;
>> + g-np-tx-fifo-size = <128>;
>> + g-tx-fifo-size = <128 128 16 16 16>;
>> + };
>> +
>> + dwc3: usb@ff500000 {
>> + compatible = "snps,dwc3";
>> + reg = <0x0 0xff500000 0x0 0x100000>;
>> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
>> + dr_mode = "host";
>> + maximum-speed = "high-speed";
>> + snps,dis_u2_susphy_quirk;
>> + };
>> + };
>> +
>> ethmac: ethernet@ff3f0000 {
>> compatible = "amlogic,meson-axg-dwmac",
>> "snps,dwmac-3.70a",
>> @@ -1734,6 +1774,16 @@ sd_emmc_c: mmc@7000 {
>> clock-names = "core", "clkin0", "clkin1";
>> resets = <&reset RESET_SD_EMMC_C>;
>> };
>> +
>> + usb2_phy1: phy@9020 {
>> + compatible = "amlogic,meson-gxl-usb2-phy";
>> + #phy-cells = <0>;
>> + reg = <0x0 0x9020 0x0 0x20>;
>> + clocks = <&clkc CLKID_USB>;
>> + clock-names = "phy";
>> + resets = <&reset RESET_USB_OTG>;
>> + reset-names = "phy";
>> + };
>> };
>>
>> sram: sram@fffc0000 {
>>
>
>Hi Sasha,
>
>This needs also support in the dwc3-meson-g12a driver, you can drop it from backport.

Dropped, thanks!

--
Thanks,
Sasha

\
 
 \ /
  Last update: 2020-11-08 14:15    [W:0.314 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site