lkml.org 
[lkml]   [2020]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ALSA: usb-audio: Fix coding style problems
Date
From: Atul Gopinathan <leoatul12@gmail.com>

Hi,

This patch fixes some coding style warnings and errors that were
generated using scripts/checkpatch.pl.

Signed-off-by: Atul Gopinathan <leoatul12@gmail.com>
---
sound/usb/pcm.c | 16 ++++++++--------
sound/usb/quirks.c | 21 +++++++++++----------
2 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index a860303cc522..ed5c77ce8e14 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -104,7 +104,7 @@ static struct audioformat *find_format(struct snd_usb_substream *subs)
continue;
}
attr = fp->ep_attr & USB_ENDPOINT_SYNCTYPE;
- if (! found) {
+ if (!found) {
found = fp;
cur_attr = attr;
continue;
@@ -304,7 +304,7 @@ static int search_roland_implicit_fb(struct usb_device *dev, int ifnum,
if (altsd->bAlternateSetting != altsetting ||
altsd->bInterfaceClass != USB_CLASS_VENDOR_SPEC ||
(altsd->bInterfaceSubClass != 2 &&
- altsd->bInterfaceProtocol != 2 ) ||
+ altsd->bInterfaceProtocol != 2) ||
altsd->bNumEndpoints < 1)
return -ENOENT;
epd = get_endpoint(*alts, 0);
@@ -482,8 +482,9 @@ static int set_sync_endpoint(struct snd_usb_substream *subs,

/* check sync-pipe endpoint */
/* ... and check descriptor size before accessing bSynchAddress
- because there is a version of the SB Audigy 2 NX firmware lacking
- the audio fields in the endpoint descriptors */
+ * because there is a version of the SB Audigy 2 NX firmware lacking
+ * the audio fields in the endpoint descriptors
+ */
if ((get_endpoint(alts, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC ||
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
get_endpoint(alts, 1)->bSynchAddress != 0)) {
@@ -911,7 +912,7 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
struct usb_interface *iface;
int ret;

- if (! subs->cur_audiofmt) {
+ if (!subs->cur_audiofmt) {
dev_err(&subs->dev->dev, "no format is specified!\n");
return -ENXIO;
}
@@ -973,9 +974,8 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
return ret;
}

-static const struct snd_pcm_hardware snd_usb_hardware =
-{
- .info = SNDRV_PCM_INFO_MMAP |
+static const struct snd_pcm_hardware snd_usb_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
SNDRV_PCM_INFO_BATCH |
SNDRV_PCM_INFO_INTERLEAVED |
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index c989ad8052ae..b6f3345db93f 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -398,7 +398,7 @@ static int create_autodetect_quirks(struct snd_usb_audio *chip,
}

/*
- * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.
+ * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface.
* The only way to detect the sample rate is by looking at wMaxPacketSize.
*/
static int create_uaxx_quirk(struct snd_usb_audio *chip,
@@ -593,7 +593,7 @@ static int snd_usb_extigy_boot_quirk(struct usb_device *dev, struct usb_interfac
le16_to_cpu(get_cfg_desc(config)->wTotalLength) == EXTIGY_FIRMWARE_SIZE_NEW) {
dev_dbg(&dev->dev, "sending Extigy boot sequence...\n");
/* Send message to force it to reconnect with full interface. */
- err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev,0),
+ err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
0x10, 0x43, 0x0001, 0x000a, NULL, 0);
if (err < 0)
dev_dbg(&dev->dev, "error sending boot message: %d\n", err);
@@ -646,8 +646,9 @@ static int snd_usb_fasttrackpro_boot_quirk(struct usb_device *dev)
"error usb_driver_set_configuration: %d\n",
err);
/* Always return an error, so that we stop creating a device
- that will just be destroyed and recreated with a new
- configuration */
+ * that will just be destroyed and recreated with a new
+ * configuration
+ */
return -ENODEV;
} else
dev_info(&dev->dev, "Fast Track Pro config OK\n");
@@ -895,9 +896,10 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
usb_reset_device(dev);

/* return -EAGAIN, so the creation of an audio interface for this
- * temporary device is aborted. The device will reconnect with a
- * new product ID */
- return -EAGAIN;
+ * temporary device is aborted. The device will reconnect with a
+ * new product ID
+ */
+ return -EAGAIN;
}

static void mbox2_setup_48_24_magic(struct usb_device *dev)
@@ -919,7 +921,6 @@ static void mbox2_setup_48_24_magic(struct usb_device *dev)
0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
- return;
}

/* Digidesign Mbox 2 needs to load firmware onboard
@@ -1830,8 +1831,8 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip,
/* doesn't set the sample rate attribute, but supports it */
fp->attributes |= UAC_EP_CS_ATTR_SAMPLE_RATE;
break;
- case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
- case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
+ case USB_ID(0x0763, 0x2001): /* M-Audio Quattro USB */
+ case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
case USB_ID(0x047f, 0x0ca1): /* plantronics headset */
case USB_ID(0x077d, 0x07af): /* Griffin iMic (note that there is
an older model 77d:223) */
--
2.25.1
\
 
 \ /
  Last update: 2020-11-08 09:41    [W:1.915 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site