lkml.org 
[lkml]   [2020]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] phy: intel: Add Keem Bay USB PHY support
Date
Hi.

Intel Keem Bay USB subsystem incorporates DesignWare USB3.1 controller,
an USB3.1 (Gen1/2) PHY and an USB2.0 PHY. It is a Dual Role Device
(DRD), operating as either a USB host or a USB device.

The patchset is tested on Keem Bay EVM.

Thank you.

Best regards,
Zainie

Changes since v1:
- Remove 2 patches that had been merged. Reduced To, Cc list.
- Rebased to v5.10-rc3.
- Add Rob's Reviewed-by tag in the first patch.
- Use ARCH_KEEMBAY in Kconfig.
- Update #include header; remove <linux/of_address.h>, and add
<linux/bits.h>.
- Remove unnecessary comments.

Note: I resend this v2 as my previous v2 sent on Oct 28 not seen
in mailing lists.


Wan Ahmad Zainie (2):
dt-bindings: phy: Add Intel Keem Bay USB PHY bindings
phy: intel: Add Keem Bay USB PHY support

.../bindings/phy/intel,phy-keembay-usb.yaml | 44 +++
drivers/phy/intel/Kconfig | 12 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-intel-keembay-usb.c | 288 ++++++++++++++++++
4 files changed, 345 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,phy-keembay-usb.yaml
create mode 100644 drivers/phy/intel/phy-intel-keembay-usb.c

--
2.17.1

\
 
 \ /
  Last update: 2020-11-09 04:19    [W:0.074 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site