lkml.org 
[lkml]   [2020]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 5/5] arm64: dts: imx8mn: Add GPU node
Date
According to the documentation from NXP, the i.MX8M Nano has a
Vivante GC7000 Ultra Lite as its GPU core.

With this patch, the Etnaviv driver presents the GPU as:
etnaviv-gpu 38000000.gpu: model: GC7000, revision: 6203

The stock operating voltage for the i.MX8M Nano is .85V which means
the GPU needs to run at 400MHz. For boards where the operating
voltage is higher, this can be increased.

Signed-off-by: Adam Ford <aford173@gmail.com>
---
V2: Move into this series
Update clocking description

arch/arm64/boot/dts/freescale/imx8mn.dtsi | 25 +++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 5e4b6934de40..6e650ea422a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -1008,6 +1008,31 @@ gpmi: nand-controller@33002000 {
status = "disabled";
};

+ gpu: gpu@38000000 {
+ compatible = "vivante,gc";
+ reg = <0x38000000 0x8000>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+ <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ clock-names = "reg", "bus", "core", "shader";
+ assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE_SRC>,
+ <&clk IMX8MN_CLK_GPU_SHADER_SRC>,
+ <&clk IMX8MN_CLK_GPU_AXI>,
+ <&clk IMX8MN_CLK_GPU_AHB>,
+ <&clk IMX8MN_GPU_PLL>,
+ <&clk IMX8MN_CLK_GPU_CORE_DIV>,
+ <&clk IMX8MN_CLK_GPU_SHADER_DIV>;
+ assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_GPU_PLL_OUT>,
+ <&clk IMX8MN_SYS_PLL1_800M>,
+ <&clk IMX8MN_SYS_PLL1_800M>;
+ assigned-clock-rates = <0>, <0>, <800000000>, <400000000>, <1200000000>,
+ <400000000>, <400000000>;
+ power-domains = <&pgc_gpumix>;
+ };
+
gic: interrupt-controller@38800000 {
compatible = "arm,gic-v3";
reg = <0x38800000 0x10000>,
--
2.25.1
\
 
 \ /
  Last update: 2020-11-07 15:01    [W:0.056 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site