lkml.org 
[lkml]   [2020]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v40 10/24] mm: Add 'mprotect' hook to struct vm_operations_struct
On Fri, Nov 06, 2020 at 10:04:09AM +0000, Mel Gorman wrote:
> On Wed, Nov 04, 2020 at 04:54:16PM +0200, Jarkko Sakkinen wrote:
> > From: Sean Christopherson <sean.j.christopherson@intel.com>
> >
> > Background
> > ==========
> >
> > 1. SGX enclave pages are populated with data by copying from normal memory
> > via ioctl() (SGX_IOC_ENCLAVE_ADD_PAGES), which will be added later in
> > this series.
> > 2. It is desirable to be able to restrict those normal memory data sources.
> > For instance, to ensure that the source data is executable before
> > copying data to an executable enclave page.
> > 3. Enclave page permissions are dynamic (just like normal permissions) and
> > can be adjusted at runtime with mprotect().
> >
> > This creates a problem because the original data source may have long since
> > vanished at the time when enclave page permissions are established (mmap()
> > or mprotect()).
> >
> > The solution (elsewhere in this series) is to force enclaves creators to
> > declare their paging permission *intent* up front to the ioctl(). This
> > intent can me immediately compared to the source data???s mapping and
> > rejected if necessary.
> >
> > The ???intent??? is also stashed off for later comparison with enclave
> > PTEs. This ensures that any future mmap()/mprotect() operations
> > performed by the enclave creator or done on behalf of the enclave
> > can be compared with the earlier declared permissions.
> >
> > Problem
> > =======
> >
> > There is an existing mmap() hook which allows SGX to perform this
> > permission comparison at mmap() time. However, there is no corresponding
> > ->mprotect() hook.
> >
> > Solution
> > ========
> >
> > Add a vm_ops->mprotect() hook so that mprotect() operations which are
> > inconsistent with any page's stashed intent can be rejected by the driver.
> >
>
> I have not read the series so this is superficial only. That said...
>
> > Cc: linux-mm@kvack.org
> > Cc: Andrew Morton <akpm@linux-foundation.org>
> > Cc: Matthew Wilcox <willy@infradead.org>
> > Acked-by: Jethro Beekman <jethro@fortanix.com>
> > Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
> > Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> > Co-developed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> > ---
> > include/linux/mm.h | 3 +++
> > mm/mprotect.c | 5 ++++-
> > 2 files changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/include/linux/mm.h b/include/linux/mm.h
> > index ef360fe70aaf..eb38eabc5039 100644
> > --- a/include/linux/mm.h
> > +++ b/include/linux/mm.h
> > @@ -559,6 +559,9 @@ struct vm_operations_struct {
> > void (*close)(struct vm_area_struct * area);
> > int (*split)(struct vm_area_struct * area, unsigned long addr);
> > int (*mremap)(struct vm_area_struct * area);
> > + int (*mprotect)(struct vm_area_struct *vma,
> > + struct vm_area_struct **pprev, unsigned long start,
> > + unsigned long end, unsigned long newflags);
>
> The first user of this uses the following information
>
> ret = sgx_encl_may_map(vma->vm_private_data, start, end, newflags);
>
> It only needs start, end and newflags. The pprev is passed in so the
> hook can call mprotect_fixup() which is redundant as the caller knows it
> should do that. I don't think an arbitrary driver should be responsible
> for poking too much into the mm internals to do the fixup because we do
> not know what other users of this hook might require in the future.
>
> Hence, I would suggest that the hook receive the minimum possible
> information to do the permissions check for the first in-tree user. If
> it returns without failure then mm/mprotect.c would always do the fixup.
>
> > vm_fault_t (*fault)(struct vm_fault *vmf);
> > vm_fault_t (*huge_fault)(struct vm_fault *vmf,
> > enum page_entry_size pe_size);
> > diff --git a/mm/mprotect.c b/mm/mprotect.c
> > index 56c02beb6041..1fd4fa71ce16 100644
> > --- a/mm/mprotect.c
> > +++ b/mm/mprotect.c
> > @@ -616,7 +616,10 @@ static int do_mprotect_pkey(unsigned long start, size_t len,
> > tmp = vma->vm_end;
> > if (tmp > end)
> > tmp = end;
> > - error = mprotect_fixup(vma, &prev, nstart, tmp, newflags);
> > + if (vma->vm_ops && vma->vm_ops->mprotect)
> > + error = vma->vm_ops->mprotect(vma, &prev, nstart, tmp, newflags);
> > + else
> > + error = mprotect_fixup(vma, &prev, nstart, tmp, newflags);
>
> That would then become
>
> if (vma->vm_ops && vma->vm_ops->mprotect)
> error = vma->vm_ops->mprotect(vma, &prev, nstart, tmp, newflags);
> if (!error)
> error = mprotect_fixup(vma, &prev, nstart, tmp, newflags);
>
> and mprotect_fixup would be removed from the driver.
>
> While vm_operations_struct has borderline zero documentation, a hook for
> one in-kernel user should have a comment explaining what the semantics
> of the hook is -- what is it responsible for (permission check), what
> can it change (nothing), etc. Maybe something like
>
> /*
> * Called by mprotect in the event driver-specific permission
> * checks need to be made before the mprotect is finalised.
> * No modifications should be done to the VMA, returns 0
> * if the mprotect is permitted.
> */
> int (*mprotect)(struct vm_area_struct *vma,
> unsigned long start, unsigned long end,
> unsigned long newflags);
>
> If a future driver *does* need to poke deeper into the VM for mprotect
> then at least they'll have to explain why that's a good idea.

Both comments make sense to me. I'll refine this patch on Monday and
also "x86/sgx: Add SGX misc driver interface", which uses this callback.

Thanks a lot for valuable feedback!

> --
> Mel Gorman
> SUSE Labs

/Jarkko

\
 
 \ /
  Last update: 2020-11-06 17:52    [W:0.159 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site