lkml.org 
[lkml]   [2020]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] dt-bindings: pinctrl: ocelot: Add Serval SoC support
Date
Add the documentation for the Microsemi Serval pinmuxing and gpio
controller.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
---
.../devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
index 58ea2ae57713..db99bd95d423 100644
--- a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt
@@ -3,8 +3,8 @@ Microsemi Ocelot pin controller Device Tree Bindings

Required properties:
- compatible : Should be "mscc,ocelot-pinctrl",
- "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl"
- or "mscc,luton-pinctrl"
+ "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl",
+ "mscc,luton-pinctrl" or "mscc,serval-pinctrl"
- reg : Address and length of the register set for the device
- gpio-controller : Indicates this device is a GPIO controller
- #gpio-cells : Must be 2.
--
2.28.0
\
 
 \ /
  Last update: 2020-11-06 10:32    [W:0.087 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site