lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: PCI: Race condition in pci_create_sysfs_dev_files
Hello Krzysztof!

On Friday 09 October 2020 10:08:53 Pali Rohár wrote:
> On Thursday 08 October 2020 14:59:07 Bjorn Helgaas wrote:
> > On Wed, Oct 07, 2020 at 11:14:34AM -0500, Bjorn Helgaas wrote:
> > > On Wed, Oct 07, 2020 at 10:14:00AM +0200, Pali Rohár wrote:
> > > > On Wednesday 07 October 2020 12:47:40 Oliver O'Halloran wrote:
> > > > > On Wed, Oct 7, 2020 at 10:26 AM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > > > > >
> > > > > > I'm not really a fan of this because pci_sysfs_init() is a bit of a
> > > > > > hack to begin with, and this makes it even more complicated.
> > > > > >
> > > > > > It's not obvious from the code why we need pci_sysfs_init(), but
> > > > > > Yinghai hinted [1] that we need to create sysfs after assigning
> > > > > > resources. I experimented by removing pci_sysfs_init() and skipping
> > > > > > the ROM BAR sizing. In that case, we create sysfs files in
> > > > > > pci_bus_add_device() and later assign space for the ROM BAR, so we
> > > > > > fail to create the "rom" sysfs file.
> > > > > >
> > > > > > The current solution to that is to delay the sysfs files until
> > > > > > pci_sysfs_init(), a late_initcall(), which runs after resource
> > > > > > assignments. But I think it would be better if we could create the
> > > > > > sysfs file when we assign the BAR. Then we could get rid of the
> > > > > > late_initcall() and that implicit ordering requirement.
> > > > >
> > > > > You could probably fix that by using an attribute_group to control
> > > > > whether the attribute shows up in sysfs or not. The .is_visible() for
> > > > > the group can look at the current state of the device and hide the rom
> > > > > attribute if the BAR isn't assigned or doesn't exist. That way we
> > > > > don't need to care when the actual assignment occurs.
> > > >
> > > > And cannot we just return e.g. -ENODATA (or other error code) for those
> > > > problematic sysfs nodes until late_initcall() is called?
> > >
> > > I really like Oliver's idea and I think we should push on that to see
> > > if it can be made to work. If so, we can remove the late_initcall()
> > > completely.
> > >
> > > > > > But I haven't tried to code it up, so it's probably more complicated
> > > > > > than this. I guess ideally we would assign all the resources before
> > > > > > pci_bus_add_device(). If we could do that, we could just remove
> > > > > > pci_sysfs_init() and everything would just work, but I think that's a
> > > > > > HUGE can of worms.
> > > > >
> > > > > I was under the impression the whole point of pci_bus_add_device() was
> > > > > to handle any initialisation that needed to be done after resources
> > > > > were assigned. Is the ROM BAR being potentially unassigned an x86ism
> > > > > or is there some bigger point I'm missing?
> > >
> > > We can't assign resources for each device as we enumerate it because
> > > we don't know what's in use by other devices yet to be enumerated.
> > > That part is generic, not x86-specific.
> > >
> > > The part that is x86-specific (or at least specific to systems using
> > > ACPI) is that the ACPI core doesn't reserve resources used by ACPI
> > > devices. Sometimes those resources are included in the PCI host
> > > bridge windows, and we don't want to assign them to PCI devices.
> > >
> > > I didn't trace this all the way, but the pcibios_assign_resources()
> > > and pnp_system_init() comments look relevant. It's a little concerning
> > > that they're both fs_initcalls() and the ordering looks important, but
> > > it would only be by accident of link ordering that pnp_system_init()
> > > happens first.
> >
> > Pali, what's your thought on this? Do you plan to work on this
> > yourself? If not and if you can live with your workaround a while
> > longer, I think Krzysztof might be interested in taking a crack at it.
> > I would just hate to see you guys duplicate each others' work :)
>
> Hello Bjorn!
>
> If Krzysztof wants and would be working on this issue I can let it as is
> for now.

Krzysztof, as Bjorn wrote, do you want to take this issue?

> But we should think how to deliver fix for this issue also into stable
> kernels where this race condition is happening.
>
> I think that my workaround avoid those two race conditions and if proper
> fix (= removal of pci_sysfs_init function) would take a long, what about
> trying to workaround that race condition for now?
>
> My "fix" is relatively small and simple, so it should not be much hard
> to review it.
>
> Krzysztof, what do you think?

\
 
 \ /
  Last update: 2020-11-04 17:30    [W:0.077 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site