lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/4] pinctrl: amd: fix incorrect way to disable debounce filter
Date
The correct way to disable debounce filter is to clear bit 5 and 6
of the register.

Cc: Hans de Goede <hdegoede@redhat.com>
Message-ID: <df2c008b-e7b5-4fdd-42ea-4d1c62b52139@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
---
drivers/pinctrl/pinctrl-amd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 9a760f5cd7ed..d6b2b4bd337c 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -166,14 +166,14 @@ static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
pin_reg |= BIT(DB_TMR_LARGE_OFF);
} else {
- pin_reg &= ~DB_CNTRl_MASK;
+ pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
ret = -EINVAL;
}
} else {
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
pin_reg &= ~DB_TMR_OUT_MASK;
- pin_reg &= ~DB_CNTRl_MASK;
+ pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
}
writel(pin_reg, gpio_dev->base + offset * 4);
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
--
2.28.0
\
 
 \ /
  Last update: 2020-11-04 17:05    [W:0.063 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site