lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] gpio: pcie-idio-24: Enable PEX8311 interrupts
Date
This enables the PEX8311 internal PCI wire interrupt and the PEX8311
local interrupt input so the local interrupts are forwarded to the PCI.

Fixes: 585562046628 ("gpio: Add GPIO support for the ACCES PCIe-IDIO-24 family")
Signed-off-by: Arnaud de Turckheim <quarium@gmail.com>
---
drivers/gpio/gpio-pcie-idio-24.c | 52 +++++++++++++++++++++++++++++++-
1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c
index a61de14d09b6..2a07fd96707e 100644
--- a/drivers/gpio/gpio-pcie-idio-24.c
+++ b/drivers/gpio/gpio-pcie-idio-24.c
@@ -28,6 +28,47 @@
#include <linux/spinlock.h>
#include <linux/types.h>

+/*
+ * PLX PEX8311 PCI LCS_INTCSR Interrupt Control/Status
+ *
+ * Bit: Description
+ * 0: Enable Interrupt Sources (Bit 0)
+ * 1: Enable Interrupt Sources (Bit 1)
+ * 2: Generate Internal PCI Bus Internal SERR# Interrupt
+ * 3: Mailbox Interrupt Enable
+ * 4: Power Management Interrupt Enable
+ * 5: Power Management Interrupt
+ * 6: Slave Read Local Data Parity Check Error Enable
+ * 7: Slave Read Local Data Parity Check Error Status
+ * 8: Internal PCI Wire Interrupt Enable
+ * 9: PCI Express Doorbell Interrupt Enable
+ * 10: PCI Abort Interrupt Enable
+ * 11: Local Interrupt Input Enable
+ * 12: Retry Abort Enable
+ * 13: PCI Express Doorbell Interrupt Active
+ * 14: PCI Abort Interrupt Active
+ * 15: Local Interrupt Input Active
+ * 16: Local Interrupt Output Enable
+ * 17: Local Doorbell Interrupt Enable
+ * 18: DMA Channel 0 Interrupt Enable
+ * 19: DMA Channel 1 Interrupt Enable
+ * 20: Local Doorbell Interrupt Active
+ * 21: DMA Channel 0 Interrupt Active
+ * 22: DMA Channel 1 Interrupt Active
+ * 23: Built-In Self-Test (BIST) Interrupt Active
+ * 24: Direct Master was the Bus Master during a Master or Target Abort
+ * 25: DMA Channel 0 was the Bus Master during a Master or Target Abort
+ * 26: DMA Channel 1 was the Bus Master during a Master or Target Abort
+ * 27: Target Abort after internal 256 consecutive Master Retrys
+ * 28: PCI Bus wrote data to LCS_MBOX0
+ * 29: PCI Bus wrote data to LCS_MBOX1
+ * 30: PCI Bus wrote data to LCS_MBOX2
+ * 31: PCI Bus wrote data to LCS_MBOX3
+ */
+#define PLX_PEX8311_PCI_LCS_INTCSR 0x68
+#define INTCSR_INTERNAL_PCI_WIRE BIT(8)
+#define INTCSR_LOCAL_INPUT BIT(11)
+
/**
* struct idio_24_gpio_reg - GPIO device registers structure
* @out0_7: Read: FET Outputs 0-7
@@ -92,6 +133,7 @@ struct idio_24_gpio_reg {
struct idio_24_gpio {
struct gpio_chip chip;
raw_spinlock_t lock;
+ __u8 __iomem *plx;
struct idio_24_gpio_reg __iomem *reg;
unsigned long irq_mask;
};
@@ -455,6 +497,7 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
struct device *const dev = &pdev->dev;
struct idio_24_gpio *idio24gpio;
int err;
+ const size_t pci_plx_bar_index = 1;
const size_t pci_bar_index = 2;
const char *const name = pci_name(pdev);
struct gpio_irq_chip *girq;
@@ -469,12 +512,13 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)
return err;
}

- err = pcim_iomap_regions(pdev, BIT(pci_bar_index), name);
+ err = pcim_iomap_regions(pdev, BIT(pci_plx_bar_index) | BIT(pci_bar_index), name);
if (err) {
dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err);
return err;
}

+ idio24gpio->plx = pcim_iomap_table(pdev)[pci_plx_bar_index];
idio24gpio->reg = pcim_iomap_table(pdev)[pci_bar_index];

idio24gpio->chip.label = name;
@@ -504,6 +548,12 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id)

/* Software board reset */
iowrite8(0, &idio24gpio->reg->soft_reset);
+ /*
+ * enable PLX PEX8311 internal PCI wire interrupt and local interrupt
+ * input
+ */
+ iowrite8((INTCSR_INTERNAL_PCI_WIRE | INTCSR_LOCAL_INPUT) >> 8,
+ idio24gpio->plx + PLX_PEX8311_PCI_LCS_INTCSR + 1);

err = devm_gpiochip_add_data(dev, &idio24gpio->chip, idio24gpio);
if (err) {
--
2.25.1
\
 
 \ /
  Last update: 2020-11-04 16:26    [W:0.432 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site