lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 1/7] rcu/tree: Make rcu_do_batch count how many callbacks were executed
On Tue, Nov 03, 2020 at 04:05:54PM -0800, Paul E. McKenney wrote:
> On Tue, Nov 03, 2020 at 09:25:57AM -0500, Joel Fernandes (Google) wrote:
> > Currently, rcu_do_batch() depends on the unsegmented callback list's len field
> > to know how many CBs are executed. This fields counts down from 0 as CBs are
> > dequeued. It is possible that all CBs could not be run because of reaching
> > limits in which case the remaining unexecuted callbacks are requeued in the
> > CPU's segcblist.
> >
> > The number of callbacks that were not requeued are then the negative count (how
> > many CBs were run) stored in the rcl->len which has been counting down on every
> > dequeue. This negative count is then added to the per-cpu segmented callback
> > list's to correct its count.
> >
> > Such a design works against future efforts to track the length of each segment
> > of the segmented callback list. The reason is because
> > rcu_segcblist_extract_done_cbs() will be populating the unsegmented callback
> > list's length field (rcl->len) during extraction.
> >
> > Also, the design of counting down from 0 is confusing and error-prone IMHO.
> >
> > This commit therefore explicitly counts how many callbacks were executed in
> > rcu_do_batch() itself, and uses that to update the per-CPU segcb list's ->len
> > field, without relying on the negativity of rcl->len.
> >
> > Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
> > Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
> > Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
>
> Queued for testing and further review, thank you all!
>
> I will be pulling these in as I look them over, and running tests
> in between times, so this will take some time.
>
> As usual, I could not resist editing the commit log, so please
> see below to check whether I messed something up.

Looks good to me, thanks.

- Joel



>
> Thanx, Paul
>
> ------------------------------------------------------------------------
>
> commit d77ef2684cbff728c14b3c84a356139c52ca3a5e
> Author: Joel Fernandes (Google) <joel@joelfernandes.org>
> Date: Tue Nov 3 09:25:57 2020 -0500
>
> rcu/tree: Make rcu_do_batch count how many callbacks were executed
>
> The rcu_do_batch() function extracts the ready-to-invoke callbacks
> from the rcu_segcblist located in the ->cblist field of the current
> CPU's rcu_data structure. These callbacks are first moved to a local
> (unsegmented) rcu_cblist. The rcu_do_batch() function then uses this
> rcu_cblist's ->len field to count how many CBs it has invoked, but it
> does so by counting that field down from zero. Finally, this function
> negates the value in this ->len field (resulting in a positive number)
> and subtracts the result from the ->len field of the current CPU's
> ->cblist field.
>
> Except that it is sometimes necessary for rcu_do_batch() to stop invoking
> callbacks mid-stream, despite there being more ready to invoke, for
> example, if a high-priority task wakes up. In this case the remaining
> not-yet-invoked callbacks are requeued back onto the CPU's ->cblist,
> but remain in the ready-to-invoke segment of that list. As above, the
> negative of the local rcu_cblist's ->len field is still subtracted from
> the ->len field of the current CPU's ->cblist field.
>
> The design of counting down from 0 is confusing and error-prone, plus
> use of a positive count will make it easier to provide a uniform and
> consistent API to deal with the per-segment counts that are added
> later in this series. For example, rcu_segcblist_extract_done_cbs()
> can unconditionally populate the resulting unsegmented list's ->len
> field during extraction.
>
> This commit therefore explicitly counts how many callbacks were executed
> in rcu_do_batch() itself, counting up from zero, and then uses that
> to update the per-CPU segcb list's ->len field, without relying on the
> downcounting of rcl->len from zero.
>
> Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
> Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
>
> diff --git a/kernel/rcu/rcu_segcblist.c b/kernel/rcu/rcu_segcblist.c
> index 2d2a6b6b9..bb246d8 100644
> --- a/kernel/rcu/rcu_segcblist.c
> +++ b/kernel/rcu/rcu_segcblist.c
> @@ -95,7 +95,7 @@ static void rcu_segcblist_set_len(struct rcu_segcblist *rsclp, long v)
> * This increase is fully ordered with respect to the callers accesses
> * both before and after.
> */
> -static void rcu_segcblist_add_len(struct rcu_segcblist *rsclp, long v)
> +void rcu_segcblist_add_len(struct rcu_segcblist *rsclp, long v)
> {
> #ifdef CONFIG_RCU_NOCB_CPU
> smp_mb__before_atomic(); /* Up to the caller! */
> diff --git a/kernel/rcu/rcu_segcblist.h b/kernel/rcu/rcu_segcblist.h
> index 492262b..1d2d614 100644
> --- a/kernel/rcu/rcu_segcblist.h
> +++ b/kernel/rcu/rcu_segcblist.h
> @@ -76,6 +76,7 @@ static inline bool rcu_segcblist_restempty(struct rcu_segcblist *rsclp, int seg)
> }
>
> void rcu_segcblist_inc_len(struct rcu_segcblist *rsclp);
> +void rcu_segcblist_add_len(struct rcu_segcblist *rsclp, long v);
> void rcu_segcblist_init(struct rcu_segcblist *rsclp);
> void rcu_segcblist_disable(struct rcu_segcblist *rsclp);
> void rcu_segcblist_offload(struct rcu_segcblist *rsclp);
> diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> index b6ec565..c4035e7 100644
> --- a/kernel/rcu/tree.c
> +++ b/kernel/rcu/tree.c
> @@ -2436,7 +2436,7 @@ static void rcu_do_batch(struct rcu_data *rdp)
> const bool offloaded = rcu_segcblist_is_offloaded(&rdp->cblist);
> struct rcu_head *rhp;
> struct rcu_cblist rcl = RCU_CBLIST_INITIALIZER(rcl);
> - long bl, count;
> + long bl, count = 0;
> long pending, tlimit = 0;
>
> /* If no callbacks are ready, just return. */
> @@ -2481,6 +2481,7 @@ static void rcu_do_batch(struct rcu_data *rdp)
> for (; rhp; rhp = rcu_cblist_dequeue(&rcl)) {
> rcu_callback_t f;
>
> + count++;
> debug_rcu_head_unqueue(rhp);
>
> rcu_lock_acquire(&rcu_callback_map);
> @@ -2494,15 +2495,14 @@ static void rcu_do_batch(struct rcu_data *rdp)
>
> /*
> * Stop only if limit reached and CPU has something to do.
> - * Note: The rcl structure counts down from zero.
> */
> - if (-rcl.len >= bl && !offloaded &&
> + if (count >= bl && !offloaded &&
> (need_resched() ||
> (!is_idle_task(current) && !rcu_is_callbacks_kthread())))
> break;
> if (unlikely(tlimit)) {
> /* only call local_clock() every 32 callbacks */
> - if (likely((-rcl.len & 31) || local_clock() < tlimit))
> + if (likely((count & 31) || local_clock() < tlimit))
> continue;
> /* Exceeded the time limit, so leave. */
> break;
> @@ -2519,7 +2519,6 @@ static void rcu_do_batch(struct rcu_data *rdp)
>
> local_irq_save(flags);
> rcu_nocb_lock(rdp);
> - count = -rcl.len;
> rdp->n_cbs_invoked += count;
> trace_rcu_batch_end(rcu_state.name, count, !!rcl.head, need_resched(),
> is_idle_task(current), rcu_is_callbacks_kthread());
> @@ -2527,7 +2526,7 @@ static void rcu_do_batch(struct rcu_data *rdp)
> /* Update counts and requeue any remaining callbacks. */
> rcu_segcblist_insert_done_cbs(&rdp->cblist, &rcl);
> smp_mb(); /* List handling before counting for rcu_barrier(). */
> - rcu_segcblist_insert_count(&rdp->cblist, &rcl);
> + rcu_segcblist_add_len(&rdp->cblist, -count);
>
> /* Reinstate batch limit if we have worked down the excess. */
> count = rcu_segcblist_n_cbs(&rdp->cblist);

\
 
 \ /
  Last update: 2020-11-04 16:10    [W:0.060 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site