lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/15] usb: serial: ipw: use usb_control_msg_send()
Date
The new usb_control_msg_send() nicely wraps usb_control_msg() with proper
error check. Hence use the wrapper instead of calling usb_control_msg()
directly.

Signed-off-by: Himadri Pandya <himadrispandya@gmail.com>
---
drivers/usb/serial/ipw.c | 107 +++++++++++++--------------------------
1 file changed, 36 insertions(+), 71 deletions(-)

diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index d04c7cc5c1c2..3c3895b4dff8 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -134,26 +134,16 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
struct usb_device *udev = port->serial->dev;
struct device *dev = &port->dev;
u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
- u8 *buf_flow_init;
int result;

- buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
- if (!buf_flow_init)
- return -ENOMEM;
-
/* --1: Tell the modem to initialize (we think) From sniffs this is
* always the first thing that gets sent to the modem during
* opening of the device */
dev_dbg(dev, "%s: Sending SIO_INIT (we guess)\n", __func__);
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- IPW_SIO_INIT,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- 0,
- 0, /* index */
- NULL,
- 0,
- 100000);
- if (result < 0)
+ result = usb_control_msg_send(udev, 0, IPW_SIO_INIT, USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE | USB_DIR_OUT, 0,
+ 0, NULL, 0, 100000, GFP_KERNEL);
+ if (result)
dev_err(dev, "Init of modem failed (error = %d)\n", result);

/* reset the bulk pipes */
@@ -166,31 +156,22 @@ static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)

/*--3: Tell the modem to open the floodgates on the rx bulk channel */
dev_dbg(dev, "%s:asking modem for RxRead (RXBULK_ON)\n", __func__);
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- IPW_SIO_RXCTL,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_RXBULK_ON,
- 0, /* index */
- NULL,
- 0,
- 100000);
- if (result < 0)
+ result = usb_control_msg_send(udev, 0, IPW_SIO_RXCTL, USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE | USB_DIR_OUT,
+ IPW_RXBULK_ON, 0, NULL, 0, 100000,
+ GFP_KERNEL);
+ if (result)
dev_err(dev, "Enabling bulk RxRead failed (error = %d)\n", result);

/*--4: setup the initial flowcontrol */
- dev_dbg(dev, "%s:setting init flowcontrol (%s)\n", __func__, buf_flow_init);
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- IPW_SIO_HANDFLOW,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- 0,
- 0,
- buf_flow_init,
- 0x10,
- 200000);
- if (result < 0)
+ dev_dbg(dev, "%s:setting init flowcontrol (%s)\n", __func__, buf_flow_static);
+ result = usb_control_msg_send(udev, 0, IPW_SIO_HANDFLOW,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_OUT, 0, 0, &buf_flow_static, 0x10,
+ 200000, GFP_KERNEL);
+ if (result)
dev_err(dev, "initial flowcontrol failed (error = %d)\n", result);

- kfree(buf_flow_init);
return 0;
}

@@ -223,26 +204,20 @@ static void ipw_dtr_rts(struct usb_serial_port *port, int on)

dev_dbg(dev, "%s: on = %d\n", __func__, on);

- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- IPW_SIO_SET_PIN,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR,
- 0,
- NULL,
- 0,
- 200000);
- if (result < 0)
+ result = usb_control_msg_send(udev, 0, IPW_SIO_SET_PIN,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_OUT,
+ on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, 0,
+ NULL, 0, 200000, GFP_KERNEL);
+ if (result)
dev_err(dev, "setting dtr failed (error = %d)\n", result);

- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- IPW_SIO_SET_PIN, USB_TYPE_VENDOR |
- USB_RECIP_INTERFACE | USB_DIR_OUT,
- on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
- 0,
- NULL,
- 0,
- 200000);
- if (result < 0)
+ result = usb_control_msg_send(udev, 0, IPW_SIO_SET_PIN,
+ USB_TYPE_VENDOR | USB_RECIP_INTERFACE |
+ USB_DIR_OUT,
+ on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS,
+ 0, NULL, 0, 200000, GFP_KERNEL);
+ if (result)
dev_err(dev, "setting rts failed (error = %d)\n", result);
}

@@ -254,30 +229,20 @@ static void ipw_close(struct usb_serial_port *port)

/*--3: purge */
dev_dbg(dev, "%s:sending purge\n", __func__);
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- IPW_SIO_PURGE, USB_TYPE_VENDOR |
- USB_RECIP_INTERFACE | USB_DIR_OUT,
- 0x03,
- 0,
- NULL,
- 0,
- 200000);
- if (result < 0)
+ result = usb_control_msg_send(udev, 0, IPW_SIO_PURGE, USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE | USB_DIR_OUT, 0x03,
+ 0, NULL, 0, 200000, GFP_KERNEL);
+ if (result)
dev_err(dev, "purge failed (error = %d)\n", result);


/* send RXBULK_off (tell modem to stop transmitting bulk data on
rx chan) */
- result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- IPW_SIO_RXCTL,
- USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT,
- IPW_RXBULK_OFF,
- 0, /* index */
- NULL,
- 0,
- 100000);
-
- if (result < 0)
+ result = usb_control_msg_send(udev, 0, IPW_SIO_RXCTL, USB_TYPE_VENDOR |
+ USB_RECIP_INTERFACE | USB_DIR_OUT,
+ IPW_RXBULK_OFF, 0, NULL, 0, 100000, GFP_KERNEL);
+
+ if (result)
dev_err(dev, "Disabling bulk RxRead failed (error = %d)\n", result);

usb_wwan_close(port);
--
2.17.1
\
 
 \ /
  Last update: 2020-11-04 07:49    [W:1.017 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site