lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: media: i2c: Add OV5648 bindings documentation
Hi Sakari,

On Fri 30 Oct 20, 18:37, Sakari Ailus wrote:
> On Fri, Oct 23, 2020 at 07:49:43PM +0200, Paul Kocialkowski wrote:
> > This introduces YAML bindings documentation for the OV5648
> > image sensor.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > ---
> > .../bindings/media/i2c/ovti,ov5648.yaml | 115 ++++++++++++++++++
> > 1 file changed, 115 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
> > new file mode 100644
> > index 000000000000..347af925b450
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
> > @@ -0,0 +1,115 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov5648.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: OmniVision OV5648 Image Sensor Device Tree Bindings
> > +
> > +maintainers:
> > + - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > +
> > +properties:
> > + compatible:
> > + const: ovti,ov5648
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: XVCLK Clock
> > +
> > + clock-names:
> > + items:
> > + - const: xvclk
> > +
> > + dvdd-supply:
> > + description: Digital Domain Power Supply
> > +
> > + avdd-supply:
> > + description: Analog Domain Power Supply (internal AVDD is used if missing)
> > +
> > + dovdd-supply:
> > + description: I/O Domain Power Supply
> > +
> > + powerdown-gpios:
> > + maxItems: 1
> > + description: Power Down Pin GPIO Control (active low)
> > +
> > + reset-gpios:
> > + maxItems: 1
> > + description: Reset Pin GPIO Control (active low)
> > +
> > + port:
> > + type: object
> > + description: Input port, connect to a MIPI CSI-2 receiver
>
> "Input"? I'd describe this as output.
>
> How about e.g. "MIPI CSI-2 transmitter port"?

Woops, that's definitely a mistake. Your suggestion sounds good, thanks!

> > +
> > + properties:
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + bus-type:
> > + const: 4
> > +
> > + clock-lanes:
> > + maxItems: 1
>
> You can drop the two as they're always the same.

See my reply to the same comment on the other series.

Cheers,

Paul

> > +
> > + data-lanes:
> > + minItems: 1
> > + maxItems: 2
> > +
> > + required:
> > + - bus-type
> > + - data-lanes
> > + - remote-endpoint
> > +
> > + additionalProperties: false
> > +
> > + required:
> > + - endpoint
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - clock-names
> > + - dvdd-supply
> > + - dovdd-supply
> > + - port
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/sun8i-v3s-ccu.h>
> > + #include <dt-bindings/gpio/gpio.h>
> > +
> > + i2c0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + ov5648: camera@36 {
> > + compatible = "ovti,ov5648";
> > + reg = <0x36>;
> > +
> > + dvdd-supply = <&ov5648_dvdd>;
> > + avdd-supply = <&ov5648_avdd>;
> > + dovdd-supply = <&ov5648_dovdd>;
> > + clocks = <&ov5648_xvclk 0>;
> > + clock-names = "xvclk";
> > +
> > + ov5648_out: port {
> > + ov5648_out_mipi_csi2: endpoint {
> > + bus-type = <4>; /* MIPI CSI-2 D-PHY */
> > + clock-lanes = <0>;
> > + data-lanes = <1 2>;
> > +
> > + remote-endpoint = <&mipi_csi2_in_ov5648>;
> > + };
> > + };
> > + };
> > + };
>
> --
> Sakari Ailus

--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-04 11:31    [W:0.089 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site