lkml.org 
[lkml]   [2020]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] arm64: dts: ti: k3-j721e*: Cleanup disabled nodes at SoC dtsi level
Date
The device tree standard sets the default node behavior when status
property as enabled. There are many reasons for doing the same, number
of strings in device tree, default power management functionality etc
are few of the reasons.

In general, after a few rounds of discussions [1] there are few
options one could take when dealing with SoC dtsi and board dts

a. SoC dtsi provide nodes as a super-set default (aka enabled) state and
to prevent messy board files, when more boards are added per SoC, we
optimize and disable commonly un-used nodes in board-common.dtsi
b. SoC dtsi disables all hardware dependent nodes by default and board
dts files enable nodes based on a need basis.
c. Subjectively pick and choose which nodes we will disable by default
in SoC dtsi and over the years we can optimize things and change
default state depending on the need.

While there are pros and cons on each of these approaches, the right
thing to do will be to stick with device tree default standards and
work within those established rules. So, we choose to go with option
(a).

Lets cleanup defaults of j721e SoC dtsi before this gets more harder
to cleanup later on and new SoCs are added.

The only functional difference between the dtb generated is
status='okay' is no longer necessary for mcasp10 and depends on the
default state.

[1] https://lore.kernel.org/linux-arm-kernel/20201027130701.GE5639@atomide.com/

Fixes: 1c4d35265fb2 ("arm64: dts: ti: k3-j721e-main: Add McASP nodes")
Fixes: 76921f15acc0 ("arm64: dts: ti: k3-j721e-main: Add DSS node")
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
.../dts/ti/k3-j721e-common-proc-board.dts | 48 ++++++++++++++++++-
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 26 ----------
2 files changed, 47 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 52e121155563..9416528caa8a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -540,6 +540,46 @@ &dss {
<&k3_clks 152 18>; /* PLL23_HSDIV0 */
};

+&mcasp0 {
+ status = "disabled";
+};
+
+&mcasp1 {
+ status = "disabled";
+};
+
+&mcasp2 {
+ status = "disabled";
+};
+
+&mcasp3 {
+ status = "disabled";
+};
+
+&mcasp4 {
+ status = "disabled";
+};
+
+&mcasp5 {
+ status = "disabled";
+};
+
+&mcasp6 {
+ status = "disabled";
+};
+
+&mcasp7 {
+ status = "disabled";
+};
+
+&mcasp8 {
+ status = "disabled";
+};
+
+&mcasp9 {
+ status = "disabled";
+};
+
&mcasp10 {
#sound-dai-cells = <0>;

@@ -556,8 +596,10 @@ &mcasp10 {
>;
tx-num-evt = <0>;
rx-num-evt = <0>;
+};

- status = "okay";
+&mcasp11 {
+ status = "disabled";
};

&serdes0 {
@@ -639,3 +681,7 @@ &pcie3_rc {
&pcie3_ep {
status = "disabled";
};
+
+&dss {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index e2a96b2c423c..b54332d6fdc5 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1327,8 +1327,6 @@ dss: dss@04a00000 {
"common_s1",
"common_s2";

- status = "disabled";
-
dss_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1350,8 +1348,6 @@ mcasp0: mcasp@2b00000 {
clocks = <&k3_clks 174 1>;
clock-names = "fck";
power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp1: mcasp@2b10000 {
@@ -1369,8 +1365,6 @@ mcasp1: mcasp@2b10000 {
clocks = <&k3_clks 175 1>;
clock-names = "fck";
power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp2: mcasp@2b20000 {
@@ -1388,8 +1382,6 @@ mcasp2: mcasp@2b20000 {
clocks = <&k3_clks 176 1>;
clock-names = "fck";
power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp3: mcasp@2b30000 {
@@ -1407,8 +1399,6 @@ mcasp3: mcasp@2b30000 {
clocks = <&k3_clks 177 1>;
clock-names = "fck";
power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp4: mcasp@2b40000 {
@@ -1426,8 +1416,6 @@ mcasp4: mcasp@2b40000 {
clocks = <&k3_clks 178 1>;
clock-names = "fck";
power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp5: mcasp@2b50000 {
@@ -1445,8 +1433,6 @@ mcasp5: mcasp@2b50000 {
clocks = <&k3_clks 179 1>;
clock-names = "fck";
power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp6: mcasp@2b60000 {
@@ -1464,8 +1450,6 @@ mcasp6: mcasp@2b60000 {
clocks = <&k3_clks 180 1>;
clock-names = "fck";
power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp7: mcasp@2b70000 {
@@ -1483,8 +1467,6 @@ mcasp7: mcasp@2b70000 {
clocks = <&k3_clks 181 1>;
clock-names = "fck";
power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp8: mcasp@2b80000 {
@@ -1502,8 +1484,6 @@ mcasp8: mcasp@2b80000 {
clocks = <&k3_clks 182 1>;
clock-names = "fck";
power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp9: mcasp@2b90000 {
@@ -1521,8 +1501,6 @@ mcasp9: mcasp@2b90000 {
clocks = <&k3_clks 183 1>;
clock-names = "fck";
power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp10: mcasp@2ba0000 {
@@ -1540,8 +1518,6 @@ mcasp10: mcasp@2ba0000 {
clocks = <&k3_clks 184 1>;
clock-names = "fck";
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

mcasp11: mcasp@2bb0000 {
@@ -1559,8 +1535,6 @@ mcasp11: mcasp@2bb0000 {
clocks = <&k3_clks 185 1>;
clock-names = "fck";
power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
-
- status = "disabled";
};

watchdog0: watchdog@2200000 {
--
2.29.2
\
 
 \ /
  Last update: 2020-11-04 23:44    [W:0.078 / U:1.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site