Messages in this thread | | | Subject | Re: [PATCH] hwmon: corsair-psu: update supported devices | From | Backlund Thomas <> | Date | Mon, 30 Nov 2020 18:25:30 +0200 |
| |
Den 30.11.2020 kl. 16:49, skrev Wilken Gottwalt: > On Mon, 30 Nov 2020 14:43:44 +0200 > Thomas Backlund <tmb@iki.fi> wrote: > >> Den 28.11.2020 kl. 12:35, skrev Wilken Gottwalt: >>> On Sat, 28 Nov 2020 02:37:38 -0300 >>> Jonas Malaco <jonas@protocubo.io> wrote: >>> >>>> On Thu, Nov 26, 2020 at 8:43 AM Wilken Gottwalt >>>> <wilken.gottwalt@posteo.net> wrote: >>>>> Adds support for another Corsair PSUs series: AX760i, AX860i, AX1200i, >>>>> AX1500i and AX1600i. The first 3 power supplies are supported through >>>>> the Corsair Link USB Dongle which is some kind of USB/Serial/TTL >>>>> converter especially made for the COM ports of these power supplies. >>>>> There are 3 known revisions of these adapters. The AX1500i power supply >>>>> has revision 3 built into the case and AX1600i is the only one in that >>>>> series, which has an unique usb hid id like the RM/RX series. >>>> Can I ask what AXi power supplies were tested? >>>> >>>> I ask because, based on the user-space implementations I am aware of, >>>> the AXi dongle protocol appears to be different from the RMi/HXi series. >>> I was not able to test this against the AX power supplies, they are really >>> hard to find (and are far to expensive). But I went through all these tools >>> and stuck to the most common commands, which all 3 series support. Not every >>> series supports all commands (there also seem to be different firmwares in >>> the micro-conrollers). But this is fine, some sensors will show up as N/A. >>> Even my HX850i does not support all commands covered in this driver. >>> >> What kind of tests do you want / need ? >> >> I have an AX860i here. > Oh nice. Lets start with an usb info dump. Can you give me the full dump of > lsusb -vd <device> of the Corsair USB dongle?
$ lsusb -vd 1b1c:1c00
Bus 011 Device 005: ID 1b1c:1c00 Corsair Controller for Corsair Link Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1b1c Corsair idProduct 0x1c00 Controller for Corsair Link bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 Corsair Link TM USB Dongle iSerial 3 R7480347 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 Corsair Link TM USB Dongle Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 can't get debug descriptor: Resource temporarily unavailable Device Status: 0x0000 (Bus Powered)
--
Thomas
| |