lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: Add pci reset quirk for Huawei Intelligent NIC virtual function
On Sat, 28 Nov 2020 17:29:19 -0600
Bjorn Helgaas <helgaas@kernel.org> wrote:

> [+cc Alex]
>
> On Sat, Nov 28, 2020 at 02:18:25PM +0800, Chiqijun wrote:
> > When multiple VFs do FLR at the same time, the firmware is
> > processed serially, resulting in some VF FLRs being delayed more
> > than 100ms, when the virtual machine restarts and the device
> > driver is loaded, the firmware is doing the corresponding VF
> > FLR, causing the driver to fail to load.
> >
> > To solve this problem, add host and firmware status synchronization
> > during FLR.
>
> Is this because the Huawei Intelligent NIC isn't following the spec,
> or is it because Linux isn't correctly waiting for the FLR to
> complete?

Seems like a spec compliance issue, I don't recall anything in the spec
about coordinating FLR between VFs.

> If this is a Huawei Intelligent NIC defect, is there documentation
> somewhere (errata) that you can reference? Will it be fixed in future
> designs, so we don't have to add future Device IDs to the quirk?
>
> > Signed-off-by: Chiqijun <chiqijun@huawei.com>
> > ---
> > drivers/pci/quirks.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 67 insertions(+)
> >
> > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> > index f70692ac79c5..bd6236ea9064 100644
> > --- a/drivers/pci/quirks.c
> > +++ b/drivers/pci/quirks.c
> > @@ -3912,6 +3912,71 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
> > return 0;
> > }
> >
> > +#define PCI_DEVICE_ID_HINIC_VF 0x375E
> > +#define HINIC_VF_FLR_TYPE 0x1000
> > +#define HINIC_VF_OP 0xE80
> > +#define HINIC_OPERATION_TIMEOUT 15000
> > +
> > +/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
> > +static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
> > +{
> > + unsigned long timeout;
> > + void __iomem *bar;
> > + u16 old_command;
> > + u32 val;
> > +
> > + if (probe)
> > + return 0;
> > +
> > + bar = pci_iomap(pdev, 0, 0);
> > + if (!bar)
> > + return -ENOTTY;
> > +
> > + pci_read_config_word(pdev, PCI_COMMAND, &old_command);
> > +
> > + /*
> > + * FLR cap bit bit30, FLR ACK bit: bit18, to avoid big-endian conversion
> > + * the big-endian bit6, bit10 is directly operated here
> > + */
> > + val = readl(bar + HINIC_VF_FLR_TYPE);
> > + if (!(val & (1UL << 6))) {
> > + pci_iounmap(pdev, bar);
> > + return -ENOTTY;
> > + }


I don't know exactly what this is testing, but it seems like a
feature/capability test that can fail, why is it not done as part of
the probe? Can we define bit 6 with a macro? Same for bit 10 in the
VF op register below.

> > +
> > + val = readl(bar + HINIC_VF_OP);
> > + val = val | (1UL << 10);
> > + writel(val, bar + HINIC_VF_OP);
> > +
> > + /* Perform the actual device function reset */
> > + pcie_flr(pdev);
> > +
> > + pci_write_config_word(pdev, PCI_COMMAND,
> > + old_command | PCI_COMMAND_MEMORY);
> > +
> > + /* Waiting for device reset complete */
> > + timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);

Yikes, 15s timeout!

> > + do {
> > + val = readl(bar + HINIC_VF_OP);
> > + if (!(val & (1UL << 10)))
> > + goto reset_complete;
> > + msleep(20);
> > + } while (time_before(jiffies, timeout));
> > +
> > + val = readl(bar + HINIC_VF_OP);
> > + if (!(val & (1UL << 10)))
> > + goto reset_complete;
> > +
> > + pci_warn(pdev, "Reset dev timeout, flr ack reg: %x\n",
> > + be32_to_cpu(val));
> > +
> > +reset_complete:
> > + pci_write_config_word(pdev, PCI_COMMAND, old_command);
> > + pci_iounmap(pdev, bar);
> > +
> > + return 0;
> > +}
> > +
> > static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> > { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
> > reset_intel_82599_sfp_virtfn },
> > @@ -3923,6 +3988,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> > { PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
> > { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
> > reset_chelsio_generic_dev },
> > + { PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
> > + reset_hinic_vf_dev },
> > { 0 }
> > };
> >
> > --
> > 2.17.1
> >
>

\
 
 \ /
  Last update: 2020-11-30 16:49    [W:0.068 / U:2.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site