lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] hwmon: corsair-psu: update supported devices
From
Date
Den 28.11.2020 kl. 12:35, skrev Wilken Gottwalt:
> On Sat, 28 Nov 2020 02:37:38 -0300
> Jonas Malaco <jonas@protocubo.io> wrote:
>
>> On Thu, Nov 26, 2020 at 8:43 AM Wilken Gottwalt
>> <wilken.gottwalt@posteo.net> wrote:
>>>
>>> Adds support for another Corsair PSUs series: AX760i, AX860i, AX1200i,
>>> AX1500i and AX1600i. The first 3 power supplies are supported through
>>> the Corsair Link USB Dongle which is some kind of USB/Serial/TTL
>>> converter especially made for the COM ports of these power supplies.
>>> There are 3 known revisions of these adapters. The AX1500i power supply
>>> has revision 3 built into the case and AX1600i is the only one in that
>>> series, which has an unique usb hid id like the RM/RX series.
>>
>> Can I ask what AXi power supplies were tested?
>>
>> I ask because, based on the user-space implementations I am aware of,
>> the AXi dongle protocol appears to be different from the RMi/HXi series.
>
> I was not able to test this against the AX power supplies, they are really
> hard to find (and are far to expensive). But I went through all these tools
> and stuck to the most common commands, which all 3 series support. Not every
> series supports all commands (there also seem to be different firmwares in
> the micro-conrollers). But this is fine, some sensors will show up as N/A.
> Even my HX850i does not support all commands covered in this driver.
>

What kind of tests do you want / need ?

I have an AX860i here.

--
Regards

Thomas Backlund

\
 
 \ /
  Last update: 2020-11-30 13:53    [W:0.190 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site