lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[v4 05/11] arm64: dts: ls1088a: add DT node for external interrupt lines
    Date
    From: Biwen Li <biwen.li@nxp.com>

    Add device-tree node for external interrupt lines IRQ0-IRQ11.

    Signed-off-by: Biwen Li <biwen.li@nxp.com>
    ---
    Change in v4:
    - remove copyright to fix corrupt

    Change in v3:
    - none

    Change in v2:
    - none

    .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 31 +++++++++++++++++++
    1 file changed, 31 insertions(+)

    diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
    index ff5805206a28..a2fcd475088b 100644
    --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
    +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
    @@ -220,6 +220,37 @@
    little-endian;
    };

    + isc: syscon@1f70000 {
    + compatible = "fsl,ls1088a-isc", "syscon";
    + reg = <0x0 0x1f70000 0x0 0x10000>;
    + little-endian;
    + #address-cells = <1>;
    + #size-cells = <1>;
    + ranges = <0x0 0x0 0x1f70000 0x10000>;
    +
    + extirq: interrupt-controller@14 {
    + compatible = "fsl,ls1088a-extirq";
    + #interrupt-cells = <2>;
    + #address-cells = <0>;
    + interrupt-controller;
    + reg = <0x14 4>;
    + interrupt-map =
    + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
    + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
    + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
    + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
    + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
    + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
    + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
    + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
    + <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
    + <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
    + <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
    + <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
    + interrupt-map-mask = <0xffffffff 0x0>;
    + };
    + };
    +
    tmu: tmu@1f80000 {
    compatible = "fsl,qoriq-tmu";
    reg = <0x0 0x1f80000 0x0 0x10000>;
    --
    2.17.1
    \
     
     \ /
      Last update: 2020-11-30 11:09    [W:2.228 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site