lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH/RFC] dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
Hi Geert,

Thank you for the patch.

On Thu, Nov 26, 2020 at 2:21 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
>
> The R-Car PCIe controller does not use interrupts when configured
> for endpoint mode, hence the bindings do not document the interrupt
> property. However, all DTS files provide interrupts properties, and
> thus fail to validate.
>
> Fix this by documenting the interrupts property.
>
> Fixes: 5be478f9c24fbdf8 ("dt-bindings: Another round of adding missing 'additionalProperties'")
> Fixes: 4c0f80920923f103 ("dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller")
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> ---
> Alternatively, the interrupts properties should be removed from the
> corresponding device nodes in the DTS files. Obviously they should be
> retained in the device nodes representing PCIe controllers configured in
> host mode, which describe the same hardware...
> ---
> Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Cheers,
Prabhakar

> diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
> index fb97f4ea0e63682b..32a3b7665ff5473c 100644
> --- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
> +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
> @@ -33,6 +33,10 @@ properties:
> - const: memory2
> - const: memory3
>
> + interrupts:
> + minItems: 3
> + maxItems: 3
> +
> power-domains:
> maxItems: 1
>
> @@ -54,6 +58,7 @@ required:
> - compatible
> - reg
> - reg-names
> + - interrupts
> - resets
> - power-domains
> - clocks
> @@ -65,6 +70,7 @@ additionalProperties: false
> examples:
> - |
> #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/power/r8a774c0-sysc.h>
>
> pcie0_ep: pcie-ep@fe000000 {
> @@ -76,6 +82,9 @@ examples:
> <0x30000000 0x8000000>,
> <0x38000000 0x8000000>;
> reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> resets = <&cpg 319>;
> power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
> clocks = <&cpg CPG_MOD 319>;
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2020-11-30 11:03    [W:0.265 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site