lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] mm/debug_vm_pgtable/basic: Add validation for dirtiness after write protect
On Mon, Nov 30, 2020 at 09:55:00AM +0530, Anshuman Khandual wrote:
> On 11/27/20 3:14 PM, Catalin Marinas wrote:
> > On Fri, Nov 27, 2020 at 09:22:24AM +0100, Christophe Leroy wrote:
> >> Le 27/11/2020 à 06:06, Anshuman Khandual a écrit :
> >>> This adds validation tests for dirtiness after write protect conversion for
> >>> each page table level. This is important for platforms such as arm64 that
> >>> removes the hardware dirty bit while making it an write protected one. This
> >>> also fixes pxx_wrprotect() related typos in the documentation file.
> >>
> >>> diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
> >>> index c05d9dcf7891..a5be11210597 100644
> >>> --- a/mm/debug_vm_pgtable.c
> >>> +++ b/mm/debug_vm_pgtable.c
> >>> @@ -70,6 +70,7 @@ static void __init pte_basic_tests(unsigned long pfn, pgprot_t prot)
> >>> WARN_ON(pte_young(pte_mkold(pte_mkyoung(pte))));
> >>> WARN_ON(pte_dirty(pte_mkclean(pte_mkdirty(pte))));
> >>> WARN_ON(pte_write(pte_wrprotect(pte_mkwrite(pte))));
> >>> + WARN_ON(pte_dirty(pte_wrprotect(pte)));
> >>
> >> Wondering what you are testing here exactly.
> >>
> >> Do you expect that if PTE has the dirty bit, it gets cleared by
> >> pte_wrprotect() ?
> >>
> >> Powerpc doesn't do that, it only clears the RW bit but the dirty
> >> bit remains if it is set, until you call pte_mkclean() explicitely.
> >
> > Arm64 has an unusual way of setting a hardware dirty "bit", it actually
> > clears the PTE_RDONLY bit. The pte_wrprotect() sets the PTE_RDONLY bit
> > back and we can lose the dirty information. Will found this and posted
> > patches to fix the arm64 pte_wprotect() to set a software PTE_DIRTY if
> > !PTE_RDONLY (we do this for ptep_set_wrprotect() already). My concern
> > was that we may inadvertently make a fresh/clean pte dirty with such
> > change, hence the suggestion for the test.
> >
> > That said, I think we also need a test in the other direction,
> > pte_wrprotect() should preserve any dirty information:
> >
> > WARN_ON(!pte_dirty(pte_wrprotect(pte_mkdirty(pte))));
>
> This seems like a generic enough principle which all platforms should
> adhere to. But the proposed test WARN_ON(pte_dirty(pte_wrprotect(pte)))
> might fail on some platforms if the page table entry came in as a dirty
> one and pte_wrprotect() is not expected to alter the dirty state.

Ah, so do we have architectures where entries in protection_map[] are
already dirty? If those are valid, maybe the check should be:

WARN_ON(!pte_dirty(pte) && pte_dirty(pte_wrprotect(pte)));

> Instead, should we just add the following two tests, which would ensure
> that pte_wrprotect() never alters the dirty state of a page table entry.
>
> WARN_ON(!pte_dirty(pte_wrprotect(pte_mkdirty(pte))));
> WARN_ON(pte_dirty(pte_wrprotect(pte_mkclean(pte))));

These should be added as additional tests. However, my initial thought
was to check whether pte_wrprotect() on a new pte created from a
protection_map[] entry directly would inadvertently dirty it. On arm64,
that means a protection_map[] entry missing PTE_RDONLY. A pte_mkclean()
would set PTE_RDONLY, so we'd miss such check.

--
Catalin

\
 
 \ /
  Last update: 2020-11-30 10:40    [W:0.060 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site