lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH Xilinx Alveo 1/8] Documentation: fpga: Add a document describing Alveo XRT drivers
On Sat, Nov 28, 2020 at 04:00:33PM -0800, Sonal Santan wrote:
> From: Sonal Santan <sonal.santan@xilinx.com>
>
> Describe Alveo XRT driver architecture and provide basic overview
> of Xilinx Alveo platform.
>
> Signed-off-by: Sonal Santan <sonal.santan@xilinx.com>
> ---
> Documentation/fpga/index.rst | 1 +
> Documentation/fpga/xrt.rst | 588 +++++++++++++++++++++++++++++++++++
> 2 files changed, 589 insertions(+)
> create mode 100644 Documentation/fpga/xrt.rst
>
> diff --git a/Documentation/fpga/index.rst b/Documentation/fpga/index.rst
> index f80f95667ca2..30134357b70d 100644
> --- a/Documentation/fpga/index.rst
> +++ b/Documentation/fpga/index.rst
> @@ -8,6 +8,7 @@ fpga
> :maxdepth: 1
>
> dfl
> + xrt
>
> .. only:: subproject and html
>
> diff --git a/Documentation/fpga/xrt.rst b/Documentation/fpga/xrt.rst
> new file mode 100644
> index 000000000000..9f37d46459b0
> --- /dev/null
> +++ b/Documentation/fpga/xrt.rst
> @@ -0,1 +1,588 @@
> +==================================
> +XRTV2 Linux Kernel Driver Overview
> +==================================
> +
> +XRTV2 drivers are second generation `XRT <https://github.com/Xilinx/XRT>`_ drivers which
> +support `Alveo <https://www.xilinx.com/products/boards-and-kits/alveo.html>`_ PCIe platforms
> +from Xilinx.
> +
> +XRTV2 drivers support *subsystem* style data driven platforms where driver's configuration
> +and behavior is determined by meta data provided by platform (in *device tree* format).
> +Primary management physical function (MPF) driver is called **xmgmt**. Primary user physical
> +function (UPF) driver is called **xuser** and HW subsystem drivers are packaged into a library
> +module called **xrt-lib**, which is shared by **xmgmt** and **xuser** (WIP).
WIP?
> +
> +Alveo Platform Overview
> +=======================
> +
> +Alveo platforms are architected as two physical FPGA partitions: *Shell* and *User*. Shell
Nit: The Shell provides ...
> +provides basic infrastructure for the Alveo platform like PCIe connectivity, board management,
> +Dynamic Function Exchange (DFX), sensors, clocking, reset, and security. User partition contains
> +user compiled binary which is loaded by a process called DFX also known as partial reconfiguration.
> +
> +Physical partitions require strict HW compatibility with each other for DFX to work properly.
> +Every physical partition has two interface UUIDs: *parent* UUID and *child* UUID. For simple
> +single stage platforms Shell → User forms parent child relationship. For complex two stage
> +platforms Base → Shell → User forms the parent child relationship chain.
> +
> +.. note::
> + Partition compatibility matching is key design component of Alveo platforms and XRT. Partitions
> + have child and parent relationship. A loaded partition exposes child partition UUID to advertise
> + its compatibility requirement for child partition. When loading a child partition the xmgmt
> + management driver matches parent UUID of the child partition against child UUID exported by the
> + parent. Parent and child partition UUIDs are stored in the *xclbin* (for user) or *xsabin* (for
> + base and shell). Except for root UUID, VSEC, hardware itself does not know about UUIDs. UUIDs are
> + stored in xsabin and xclbin.
> +
> +
> +The physical partitions and their loading is illustrated below::
> +
> + SHELL USER
> + +-----------+ +-------------------+
> + | | | |
> + | VSEC UUID | CHILD PARENT | LOGIC UUID |
> + | o------->|<--------o |
> + | | UUID UUID | |
> + +-----+-----+ +--------+----------+
> + | |
> + . .
> + | |
> + +---+---+ +------+--------+
> + | POR | | USER COMPILED |
> + | FLASH | | XCLBIN |
> + +-------+ +---------------+
> +
> +
> +Loading Sequence
> +----------------
> +
> +Shell partition is loaded from flash at system boot time. It establishes the PCIe link and exposes
Nit: The Shell
> +two physical functions to the BIOS. After OS boot, xmgmt driver attaches to PCIe physical function
> +0 exposed by the Shell and then looks for VSEC in PCIe extended configuration space. Using VSEC it
> +determines the logic UUID of Shell and uses the UUID to load matching *xsabin* file from Linux
> +firmware directory. The xsabin file contains metadata to discover peripherals that are part of Shell
> +and firmware(s) for any embedded soft processors in Shell.

Neat.
> +
> +Shell exports child interface UUID which is used for compatibility check when loading user compiled
Nit: The Shell
> +xclbin over the User partition as part of DFX. When a user requests loading of a specific xclbin the
> +xmgmt management driver reads the parent interface UUID specified in the xclbin and matches it with
> +child interface UUID exported by Shell to determine if xclbin is compatible with the Shell. If match
> +fails loading of xclbin is denied.
> +
> +xclbin loading is requested using ICAP_DOWNLOAD_AXLF ioctl command. When loading xclbin xmgmt driver
> +performs the following operations:
> +
> +1. Sanity check the xclbin contents
> +2. Isolate the User partition
> +3. Download the bitstream using the FPGA config engine (ICAP)
> +4. De-isolate the User partition
Is this modelled as bridges and regions?

> +5. Program the clocks (ClockWiz) driving the User partition
> +6. Wait for memory controller (MIG) calibration
> +
> +`Platform Loading Overview <https://xilinx.github.io/XRT/master/html/platforms_partitions.html>`_
> +provides more detailed information on platform loading.
> +
> +xsabin
> +------
> +
> +Each Alveo platform comes packaged with its own xsabin. The xsabin is trusted component of the
> +platform. For format details refer to :ref:`xsabin/xclbin Container Format`. xsabin contains
> +basic information like UUIDs, platform name and metadata in the form of device tree. See
> +:ref:`Device Tree Usage` for details and example.
> +
> +xclbin
> +------
> +
> +xclbin is compiled by end user using
> +`Vitis <https://www.xilinx.com/products/design-tools/vitis/vitis-platform.html>`_ tool set from
> +Xilinx. The xclbin contains sections describing user compiled acceleration engines/kernels, memory
> +subsystems, clocking information etc. It also contains bitstream for the user partition, UUIDs,
> +platform name, etc. xclbin uses the same container format as xsabin which is described below.
> +
> +
> +xsabin/xclbin Container Format
> +------------------------------
> +
> +xclbin/xsabin is ELF-like binary container format. It is structured as series of sections.
> +There is a file header followed by several section headers which is followed by sections.
> +A section header points to an actual section. There is an optional signature at the end.
> +The format is defined by header file ``xclbin.h``. The following figure illustrates a
> +typical xclbin::
> +
> +
> + +---------------------+
> + | |
> + | HEADER |
> + +---------------------+
> + | SECTION HEADER |
> + | |
> + +---------------------+
> + | ... |
> + | |
> + +---------------------+
> + | SECTION HEADER |
> + | |
> + +---------------------+
> + | SECTION |
> + | |
> + +---------------------+
> + | ... |
> + | |
> + +---------------------+
> + | SECTION |
> + | |
> + +---------------------+
> + | SIGNATURE |
> + | (OPTIONAL) |
> + +---------------------+
> +
> +
> +xclbin/xsabin files can be packaged, un-packaged and inspected using XRT utility called
> +**xclbinutil**. xclbinutil is part of XRT open source software stack. The source code for
> +xclbinutil can be found at https://github.com/Xilinx/XRT/tree/master/src/runtime_src/tools/xclbinutil
> +
> +For example to enumerate the contents of a xclbin/xsabin use the *--info* switch as shown
> +below::
> +
> + xclbinutil --info --input /opt/xilinx/firmware/u50/gen3x16-xdma/blp/test/bandwidth.xclbin
> + xclbinutil --info --input /lib/firmware/xilinx/862c7020a250293e32036f19956669e5/partition.xsabin
> +
> +
> +Device Tree Usage
> +-----------------
> +
> +As mentioned previously xsabin stores metadata which advertise HW subsystems present in a partition.
> +The metadata is stored in device tree format with well defined schema. Subsystem instantiations are
> +captured as children of ``addressable_endpoints`` node. Subsystem nodes have standard attributes like
> +``reg``, ``interrupts`` etc. Additionally the nodes also have PCIe specific attributes:
> +``pcie_physical_function`` and ``pcie_bar_mapping``. These identify which PCIe physical function and
> +which BAR space in that physical function the subsystem resides. XRT management driver uses this
> +information to bind *platform drivers* to the subsystem instantiations. The platform drivers are
> +found in **xrt-lib.ko** kernel module defined later. Below is an example of device tree for Alveo U50
> +platform::

I might be missing something, but couldn't you structure the addressable
endpoints in a way that encode the physical function as a parent / child
relation?

What are the regs relative to?
> +
> + /dts-v1/;
> +
> + /{
> + logic_uuid = "f465b0a3ae8c64f619bc150384ace69b";
> +
> + schema_version {
> + major = <0x01>;
> + minor = <0x00>;
> + };
> +
> + interfaces {
> +
> + @0 {
> + interface_uuid = "862c7020a250293e32036f19956669e5";
> + };
> + };
> +
> + addressable_endpoints {
> +
> + ep_blp_rom_00 {
> + reg = <0x00 0x1f04000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
> + };
> +
> + ep_card_flash_program_00 {
> + reg = <0x00 0x1f06000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_quad_spi-1.0\0axi_quad_spi";
> + interrupts = <0x03 0x03>;
> + };
> +
> + ep_cmc_firmware_mem_00 {
> + reg = <0x00 0x1e20000 0x00 0x20000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
> +
> + firmware {
> + firmware_product_name = "cmc";
> + firmware_branch_name = "u50";
> + firmware_version_major = <0x01>;
> + firmware_version_minor = <0x00>;
> + };
> + };
> +
> + ep_cmc_intc_00 {
> + reg = <0x00 0x1e03000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_intc-1.0\0axi_intc";
> + interrupts = <0x04 0x04>;
> + };
> +
> + ep_cmc_mutex_00 {
> + reg = <0x00 0x1e02000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_cmc_regmap_00 {
> + reg = <0x00 0x1e08000 0x00 0x2000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
> +
> + firmware {
> + firmware_product_name = "sc-fw";
> + firmware_branch_name = "u50";
> + firmware_version_major = <0x05>;
> + };
> + };
> +
> + ep_cmc_reset_00 {
> + reg = <0x00 0x1e01000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_ddr_mem_calib_00 {
> + reg = <0x00 0x63000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_debug_bscan_mgmt_00 {
> + reg = <0x00 0x1e90000 0x00 0x10000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-debug_bridge-1.0\0debug_bridge";
> + };
> +
> + ep_ert_base_address_00 {
> + reg = <0x00 0x21000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_ert_command_queue_mgmt_00 {
> + reg = <0x00 0x40000 0x00 0x10000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-ert_command_queue-1.0\0ert_command_queue";
> + };
> +
> + ep_ert_command_queue_user_00 {
> + reg = <0x00 0x40000 0x00 0x10000>;
> + pcie_physical_function = <0x01>;
> + compatible = "xilinx.com,reg_abs-ert_command_queue-1.0\0ert_command_queue";
> + };
> +
> + ep_ert_firmware_mem_00 {
> + reg = <0x00 0x30000 0x00 0x8000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
> +
> + firmware {
> + firmware_product_name = "ert";
> + firmware_branch_name = "v20";
> + firmware_version_major = <0x01>;
> + };
> + };
> +
> + ep_ert_intc_00 {
> + reg = <0x00 0x23000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_intc-1.0\0axi_intc";
> + interrupts = <0x05 0x05>;
> + };
> +
> + ep_ert_reset_00 {
> + reg = <0x00 0x22000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_ert_sched_00 {
> + reg = <0x00 0x50000 0x00 0x1000>;
> + pcie_physical_function = <0x01>;
> + compatible = "xilinx.com,reg_abs-ert_sched-1.0\0ert_sched";
> + interrupts = <0x09 0x0c>;
> + };
> +
> + ep_fpga_configuration_00 {
> + reg = <0x00 0x1e88000 0x00 0x8000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_hwicap-1.0\0axi_hwicap";
> + interrupts = <0x02 0x02>;
> + };
> +
> + ep_icap_reset_00 {
> + reg = <0x00 0x1f07000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_mailbox_mgmt_00 {
> + reg = <0x00 0x1f10000 0x00 0x10000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-mailbox-1.0\0mailbox";
> + interrupts = <0x00 0x00>;
> + };
> +
> + ep_mailbox_user_00 {
> + reg = <0x00 0x1f00000 0x00 0x10000>;
> + pcie_physical_function = <0x01>;
> + compatible = "xilinx.com,reg_abs-mailbox-1.0\0mailbox";
> + interrupts = <0x08 0x08>;
> + };
> +
> + ep_msix_00 {
> + reg = <0x00 0x00 0x00 0x20000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-msix-1.0\0msix";
> + pcie_bar_mapping = <0x02>;
> + };
> +
> + ep_pcie_link_mon_00 {
> + reg = <0x00 0x1f05000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_pr_isolate_plp_00 {
> + reg = <0x00 0x1f01000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_pr_isolate_ulp_00 {
> + reg = <0x00 0x1000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_gpio-1.0\0axi_gpio";
> + };
> +
> + ep_uuid_rom_00 {
> + reg = <0x00 0x64000 0x00 0x1000>;
> + pcie_physical_function = <0x00>;
> + compatible = "xilinx.com,reg_abs-axi_bram_ctrl-1.0\0axi_bram_ctrl";
> + };
> +
> + ep_xdma_00 {
> + reg = <0x00 0x00 0x00 0x10000>;
> + pcie_physical_function = <0x01>;
> + compatible = "xilinx.com,reg_abs-xdma-1.0\0xdma";
> + pcie_bar_mapping = <0x02>;
> + };
> + };
> +
> + }
> +
> +
> +
> +Deployment Models
> +=================
> +
> +Baremetal
> +---------
> +
> +In bare-metal deployments both MPF and UPF are visible and accessible. xmgmt driver binds to
> +MPF. xmgmt driver operations are privileged and available to system administrator. The full
> +stack is illustrated below::
> +
> +
> + HOST
> +
> + [XMGMT] [XUSER]
> + | |
> + | |
> + +-----+ +-----+
> + | MPF | | UPF |
> + | | | |
> + | PF0 | | PF1 |
> + +--+--+ +--+--+
> + ......... ^................. ^..........
> + | |
> + | PCIe DEVICE |
> + | |
> + +--+------------------+--+
> + | SHELL |
> + | |
> + +------------------------+
> + | USER |
> + | |
> + | |
> + | |
> + | |
> + +------------------------+
> +
> +
> +
> +Virtualized
> +-----------
> +
> +In virtualized deployments privileged MPF is assigned to host but unprivileged UPF
> +is assigned to guest VM via PCIe pass-through. xmgmt driver in host binds to MPF.
> +xmgmt driver operations are privileged and only accessible by hosting service provider.
> +The full stack is illustrated below::
> +
> +
> + .............
> + HOST . VM .
> + . .
> + [XMGMT] . [XUSER] .
> + | . | .
> + | . | .
> + +-----+ . +-----+ .
> + | MPF | . | UPF | .
> + | | . | | .
> + | PF0 | . | PF1 | .
> + +--+--+ . +--+--+ .
> + ......... ^................. ^..........
> + | |
> + | PCIe DEVICE |
> + | |
> + +--+------------------+--+
> + | SHELL |
> + | |
> + +------------------------+
> + | USER |
> + | |
> + | |
> + | |
> + | |
> + +------------------------+
> +
> +
> +
> +Driver Modules
> +==============
> +
> +xrt-lib.ko
> +----------
> +
> +Repository of all subsystem drivers and pure software modules that can potentially
> +be shared between xmgmt and xuser. All these drivers are structured as Linux
> +*platform driver* and are instantiated by xmgmt (or xuser in future) based on meta
> +data associated with hardware. The metadata is in the form of device tree as
> +explained before.
> +
> +xmgmt.ko
> +--------
> +
> +The xmgmt driver is a PCIe device driver driving MPF found on Xilinx's Alveo
> +PCIE device. It consists of one *root* driver, one or more *partition* drivers
> +and one or more *leaf* drivers. The root and MPF specific leaf drivers are in
> +xmgmt.ko. The partition driver and other leaf drivers are in xrt-lib.ko.
> +
> +The instantiation of specific partition driver or leaf driver is completely data
> +driven based on meta data (mostly in device tree format) found through VSEC
> +capability and inside firmware files, such as xsabin or xclbin file. The root
> +driver manages life cycle of multiple partition drivers, which, in turn, manages
> +multiple leaf drivers. This allows a single set of driver code to support all
> +kinds of subsystems exposed by different shells. The difference among all
> +these subsystems will be handled in leaf drivers with root and partition drivers
> +being part of the infrastructure and provide common services for all leaves found
> +on all platforms.
> +
> +
> +xmgmt-root
> +^^^^^^^^^^
> +
> +The xmgmt-root driver is a PCIe device driver attaches to MPF. It's part of the
Nit: s/attaches/attached ?
> +infrastructure of the MPF driver and resides in xmgmt.ko. This driver
> +
> +* manages one or more partition drivers
> +* provides access to functionalities that requires pci_dev, such as PCIE config
> + space access, to other leaf drivers through parent calls
> +* together with partition driver, facilities event callbacks for other leaf drivers
> +* together with partition driver, facilities inter-leaf driver calls for other leaf
> + drivers
> +
> +When root driver starts, it will explicitly create an initial partition instance,
> +which contains leaf drivers that will trigger the creation of other partition
> +instances. The root driver will wait for all partitions and leaves to be created
> +before it returns from it's probe routine and claim success of the initialization
> +of the entire xmgmt driver.
> +
> +partition
> +^^^^^^^^^
> +
> +The partition driver is a platform device driver whose life cycle is managed by
> +root and does not have real IO mem or IRQ resources. It's part of the
> +infrastructure of the MPF driver and resides in xrt-lib.ko. This driver
> +
> +* manages one or more leaf drivers so that multiple leaves can be managed as a group
> +* provides access to root from leaves, so that parent calls, event notifications
> + and inter-leaf calls can happen
> +
> +In xmgmt, an initial partition driver instance will be created by root, which
> +contains leaves that will trigger partition instances to be created to manage
> +groups of leaves found on different partitions on hardware, such as VSEC, Shell,
> +and User.
> +
> +leaves
> +^^^^^^
> +
> +The leaf driver is a platform device driver whose life cycle is managed by
> +a partition driver and may or may not have real IO mem or IRQ resources. They
> +are the real meat of xmgmt and contains platform specific code to Shell and User
> +found on a MPF.
> +
> +A leaf driver may not have real hardware resources when it merely acts as a driver
> +that manages certain in-memory states for xmgmt. These in-memory states could be
> +shared by multiple other leaves.
> +
> +Leaf drivers assigned to specific hardware resources drive specific subsystem in
> +the device. To manipulate the subsystem or carry out a task, a leaf driver may ask
> +help from root via parent calls and/or from other leaves via inter-leaf calls.
> +
> +A leaf can also broadcast events through infrastructure code for other leaves
> +to process. It can also receive event notification from infrastructure about certain
> +events, such as post-creation or pre-exit of a particular leaf.
> +
> +
> +Driver Interfaces
> +=================
> +
> +xmgmt Driver Ioctls
> +-------------------
> +
> +Ioctls exposed by xmgmt driver to user space are enumerated in the following table:
> +
> +== ===================== ============================= ===========================
> +# Functionality ioctl request code data format
> +== ===================== ============================= ===========================
> +1 FPGA image download XMGMT_IOCICAPDOWNLOAD_AXLF xmgmt_ioc_bitstream_axlf
> +2 CL frequency scaling XMGMT_IOCFREQSCALE xmgmt_ioc_freqscaling
> +== ===================== ============================= ===========================
> +
> +xmgmt Driver Sysfs
> +------------------
> +
> +xmgmt driver exposes a rich set of sysfs interfaces. Subsystem platform drivers
> +export sysfs node for every platform instance.
> +
> +Every partition also exports its UUIDs. See below for examples::
> +
> + /sys/bus/pci/devices/0000:06:00.0/xmgmt_main.0/interface_uuids
> + /sys/bus/pci/devices/0000:06:00.0/xmgmt_main.0/logic_uuids
> +
> +
> +hwmon
> +-----
> +
> +xmgmt driver exposes standard hwmon interface to report voltage, current, temperature,
> +power, etc. These can easily be viewed using *sensors* command line utility.
> +
> +
> +mailbox
> +-------
> +
> +xmgmt communicates with user physical function driver via HW mailbox. Mailbox opcodes
> +are defined in ``mailbox_proto.h``. `Mailbox Inter-domain Communication Protocol
> +<https://xilinx.github.io/XRT/master/html/mailbox.proto.html>`_ defines the full
> +specification. xmgmt implements subset of the specification. It provides the following
> +services to the UPF driver:
> +
> +1. Responding to *are you there* request including determining if the two drivers are
> + running in the same OS domain
> +2. Provide sensor readings, loaded xclbin UUID, clock frequency, shell information, etc.
> +3. Perform PCIe hot reset
> +4. Download user compiled xclbin

Is this gonna use the mailbox framework?

> +
> +
> +Platform Security Considerations
> +================================
> +
> +`Security of Alveo Platform <https://xilinx.github.io/XRT/master/html/security.html>`_
> +discusses the deployment options and security implications in great detail.
> --
> 2.17.1

That's a lot of text, I'll have to read it again most likely,

- Moritz

\
 
 \ /
  Last update: 2020-12-01 05:57    [W:0.376 / U:1.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site