lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH 23/40] drm/amd/pm/powerplay/hwmgr/smu7_thermal: Repair formatting in a bunch of function docs
    On Thu, Nov 26, 2020 at 8:43 AM Lee Jones <lee.jones@linaro.org> wrote:
    >
    > Fixes the following W=1 kernel build warning(s):
    >
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:112: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_static_mode'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:112: warning: Function parameter or member 'mode' not described in 'smu7_fan_ctrl_set_static_mode'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:137: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_default_mode'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:209: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_fan_speed_percent'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:209: warning: Function parameter or member 'speed' not described in 'smu7_fan_ctrl_set_fan_speed_percent'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:245: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_reset_fan_speed_to_default'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:268: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_fan_speed_rpm'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:268: warning: Function parameter or member 'speed' not described in 'smu7_fan_ctrl_set_fan_speed_rpm'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:299: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_get_temperature'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_set_temperature_range'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'low_temp' not described in 'smu7_thermal_set_temperature_range'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'high_temp' not described in 'smu7_thermal_set_temperature_range'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:358: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_initialize'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:377: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_enable_alert'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:395: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_disable_alert'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:414: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_stop_thermal_controller'
    > drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:433: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_start_smc_fan_control'
    >
    > Cc: Evan Quan <evan.quan@amd.com>
    > Cc: Alex Deucher <alexander.deucher@amd.com>
    > Cc: "Christian König" <christian.koenig@amd.com>
    > Cc: David Airlie <airlied@linux.ie>
    > Cc: Daniel Vetter <daniel@ffwll.ch>
    > Cc: amd-gfx@lists.freedesktop.org
    > Cc: dri-devel@lists.freedesktop.org
    > Signed-off-by: Lee Jones <lee.jones@linaro.org>

    Applied. Thanks!

    Alex

    > ---
    > .../drm/amd/pm/powerplay/hwmgr/smu7_thermal.c | 103 +++++++++---------
    > 1 file changed, 50 insertions(+), 53 deletions(-)
    >
    > diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
    > index e3d9d969d86ac..0d38d4206848a 100644
    > --- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
    > +++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
    > @@ -103,11 +103,11 @@ int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
    > }
    >
    > /**
    > -* Set Fan Speed Control to static mode, so that the user can decide what speed to use.
    > -* @param hwmgr the address of the powerplay hardware manager.
    > -* mode the fan control mode, 0 default, 1 by percent, 5, by RPM
    > -* @exception Should always succeed.
    > -*/
    > + * smu7_fan_ctrl_set_static_mode - Set Fan Speed Control to static mode, so that the user can decide what speed to use.
    > + * @hwmgr: the address of the powerplay hardware manager.
    > + * @mode: the fan control mode, 0 default, 1 by percent, 5, by RPM
    > + * Exception: Should always succeed.
    > + */
    > int smu7_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
    > {
    > if (hwmgr->fan_ctrl_is_in_default_mode) {
    > @@ -130,8 +130,8 @@ int smu7_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
    >
    > /**
    > * Reset Fan Speed Control to default mode.
    > -* @param hwmgr the address of the powerplay hardware manager.
    > -* @exception Should always succeed.
    > +* @hwmgr: the address of the powerplay hardware manager.
    > +* Exception: Should always succeed.
    > */
    > int smu7_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
    > {
    > @@ -199,11 +199,11 @@ int smu7_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
    > }
    >
    > /**
    > -* Set Fan Speed in percent.
    > -* @param hwmgr the address of the powerplay hardware manager.
    > -* @param speed is the percentage value (0% - 100%) to be set.
    > -* @exception Fails is the 100% setting appears to be 0.
    > -*/
    > + * smu7_fan_ctrl_set_fan_speed_percent - Set Fan Speed in percent.
    > + * @hwmgr: the address of the powerplay hardware manager.
    > + * @speed: is the percentage value (0% - 100%) to be set.
    > + * Exception: Fails is the 100% setting appears to be 0.
    > + */
    > int smu7_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
    > uint32_t speed)
    > {
    > @@ -237,9 +237,9 @@ int smu7_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
    > }
    >
    > /**
    > -* Reset Fan Speed to default.
    > -* @param hwmgr the address of the powerplay hardware manager.
    > -* @exception Always succeeds.
    > +* smu7_fan_ctrl_reset_fan_speed_to_default - Reset Fan Speed to default.
    > +* @hwmgr: the address of the powerplay hardware manager.
    > +* Exception: Always succeeds.
    > */
    > int smu7_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
    > {
    > @@ -259,11 +259,11 @@ int smu7_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
    > }
    >
    > /**
    > -* Set Fan Speed in RPM.
    > -* @param hwmgr the address of the powerplay hardware manager.
    > -* @param speed is the percentage value (min - max) to be set.
    > -* @exception Fails is the speed not lie between min and max.
    > -*/
    > + * smu7_fan_ctrl_set_fan_speed_rpm - Set Fan Speed in RPM.
    > + * @hwmgr: the address of the powerplay hardware manager.
    > + * @speed: is the percentage value (min - max) to be set.
    > + * Exception: Fails is the speed not lie between min and max.
    > + */
    > int smu7_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
    > {
    > uint32_t tach_period;
    > @@ -291,10 +291,10 @@ int smu7_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
    > }
    >
    > /**
    > -* Reads the remote temperature from the SIslands thermal controller.
    > -*
    > -* @param hwmgr The address of the hardware manager.
    > -*/
    > + * smu7_thermal_get_temperature - Reads the remote temperature from the SIslands thermal controller.
    > + *
    > + * @hwmgr: The address of the hardware manager.
    > + */
    > int smu7_thermal_get_temperature(struct pp_hwmgr *hwmgr)
    > {
    > int temp;
    > @@ -314,12 +314,13 @@ int smu7_thermal_get_temperature(struct pp_hwmgr *hwmgr)
    > }
    >
    > /**
    > -* Set the requested temperature range for high and low alert signals
    > -*
    > -* @param hwmgr The address of the hardware manager.
    > -* @param range Temperature range to be programmed for high and low alert signals
    > -* @exception PP_Result_BadInput if the input data is not valid.
    > -*/
    > + * smu7_thermal_set_temperature_range - Set the requested temperature range for high and low alert signals
    > + *
    > + * @hwmgr: The address of the hardware manager.
    > + * @low_temp: Temperature to be programmed for high alert signals
    > + * @high_temp: Temperature to be programmed for low alert signals
    > + * Exception: PP_Result_BadInput if the input data is not valid.
    > + */
    > static int smu7_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
    > int low_temp, int high_temp)
    > {
    > @@ -350,10 +351,10 @@ static int smu7_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
    > }
    >
    > /**
    > -* Programs thermal controller one-time setting registers
    > -*
    > -* @param hwmgr The address of the hardware manager.
    > -*/
    > + * smu7_thermal_initialize - Programs thermal controller one-time setting registers
    > + *
    > + * @hwmgr: The address of the hardware manager.
    > + */
    > static int smu7_thermal_initialize(struct pp_hwmgr *hwmgr)
    > {
    > if (hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
    > @@ -369,10 +370,10 @@ static int smu7_thermal_initialize(struct pp_hwmgr *hwmgr)
    > }
    >
    > /**
    > -* Enable thermal alerts on the RV770 thermal controller.
    > -*
    > -* @param hwmgr The address of the hardware manager.
    > -*/
    > + * smu7_thermal_enable_alert - Enable thermal alerts on the RV770 thermal controller.
    > + *
    > + * @hwmgr: The address of the hardware manager.
    > + */
    > static void smu7_thermal_enable_alert(struct pp_hwmgr *hwmgr)
    > {
    > uint32_t alert;
    > @@ -388,9 +389,9 @@ static void smu7_thermal_enable_alert(struct pp_hwmgr *hwmgr)
    > }
    >
    > /**
    > -* Disable thermal alerts on the RV770 thermal controller.
    > -* @param hwmgr The address of the hardware manager.
    > -*/
    > + * smu7_thermal_disable_alert - Disable thermal alerts on the RV770 thermal controller.
    > + * @hwmgr: The address of the hardware manager.
    > + */
    > int smu7_thermal_disable_alert(struct pp_hwmgr *hwmgr)
    > {
    > uint32_t alert;
    > @@ -406,10 +407,10 @@ int smu7_thermal_disable_alert(struct pp_hwmgr *hwmgr)
    > }
    >
    > /**
    > -* Uninitialize the thermal controller.
    > -* Currently just disables alerts.
    > -* @param hwmgr The address of the hardware manager.
    > -*/
    > + * smu7_thermal_stop_thermal_controller - Uninitialize the thermal controller.
    > + * Currently just disables alerts.
    > + * @hwmgr: The address of the hardware manager.
    > + */
    > int smu7_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
    > {
    > int result = smu7_thermal_disable_alert(hwmgr);
    > @@ -421,14 +422,10 @@ int smu7_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
    > }
    >
    > /**
    > -* Start the fan control on the SMC.
    > -* @param hwmgr the address of the powerplay hardware manager.
    > -* @param pInput the pointer to input data
    > -* @param pOutput the pointer to output data
    > -* @param pStorage the pointer to temporary storage
    > -* @param Result the last failure code
    > -* @return result from set temperature range routine
    > -*/
    > + * smu7_thermal_start_smc_fan_control - Start the fan control on the SMC.
    > + * @hwmgr: the address of the powerplay hardware manager.
    > + * Return: result from set temperature range routine
    > + */
    > static int smu7_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr)
    > {
    > /* If the fantable setup has failed we could have disabled
    > --
    > 2.25.1
    >
    > _______________________________________________
    > dri-devel mailing list
    > dri-devel@lists.freedesktop.org
    > https://lists.freedesktop.org/mailman/listinfo/dri-devel

    \
     
     \ /
      Last update: 2020-12-01 00:51    [W:3.354 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site