lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 38/40] drm/amd/pm/swsmu/smu11/navi10_ppt: Remove unused 'struct i2c_algorithm navi10_i2c_algo'
On Tue, Nov 24, 2020 at 2:45 PM Lee Jones <lee.jones@linaro.org> wrote:
>
> Fixes the following W=1 kernel build warning(s):
>
> Cc: Alex Deucher <alexander.deucher@amd.com>
> Cc: "Christian König" <christian.koenig@amd.com>
> Cc: David Airlie <airlied@linux.ie>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: Evan Quan <evan.quan@amd.com>
> Cc: amd-gfx@lists.freedesktop.org
> Cc: dri-devel@lists.freedesktop.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Applied. Thanks!

Alex

> ---
> .../gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 204 ------------------
> 1 file changed, 204 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
> index ef1a62e86a0ee..59bd7cd3ca8df 100644
> --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
> +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
> @@ -2325,210 +2325,6 @@ static int navi10_run_umc_cdr_workaround(struct smu_context *smu)
> return 0;
> }
>
> -static void navi10_fill_i2c_req(SwI2cRequest_t *req, bool write,
> - uint8_t address, uint32_t numbytes,
> - uint8_t *data)
> -{
> - int i;
> -
> - req->I2CcontrollerPort = 0;
> - req->I2CSpeed = 2;
> - req->SlaveAddress = address;
> - req->NumCmds = numbytes;
> -
> - for (i = 0; i < numbytes; i++) {
> - SwI2cCmd_t *cmd = &req->SwI2cCmds[i];
> -
> - /* First 2 bytes are always write for lower 2b EEPROM address */
> - if (i < 2)
> - cmd->Cmd = 1;
> - else
> - cmd->Cmd = write;
> -
> -
> - /* Add RESTART for read after address filled */
> - cmd->CmdConfig |= (i == 2 && !write) ? CMDCONFIG_RESTART_MASK : 0;
> -
> - /* Add STOP in the end */
> - cmd->CmdConfig |= (i == (numbytes - 1)) ? CMDCONFIG_STOP_MASK : 0;
> -
> - /* Fill with data regardless if read or write to simplify code */
> - cmd->RegisterAddr = data[i];
> - }
> -}
> -
> -static int navi10_i2c_read_data(struct i2c_adapter *control,
> - uint8_t address,
> - uint8_t *data,
> - uint32_t numbytes)
> -{
> - uint32_t i, ret = 0;
> - SwI2cRequest_t req;
> - struct amdgpu_device *adev = to_amdgpu_device(control);
> - struct smu_table_context *smu_table = &adev->smu.smu_table;
> - struct smu_table *table = &smu_table->driver_table;
> -
> - if (numbytes > MAX_SW_I2C_COMMANDS) {
> - dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n",
> - numbytes, MAX_SW_I2C_COMMANDS);
> - return -EINVAL;
> - }
> -
> - memset(&req, 0, sizeof(req));
> - navi10_fill_i2c_req(&req, false, address, numbytes, data);
> -
> - mutex_lock(&adev->smu.mutex);
> - /* Now read data starting with that address */
> - ret = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req,
> - true);
> - mutex_unlock(&adev->smu.mutex);
> -
> - if (!ret) {
> - SwI2cRequest_t *res = (SwI2cRequest_t *)table->cpu_addr;
> -
> - /* Assume SMU fills res.SwI2cCmds[i].Data with read bytes */
> - for (i = 0; i < numbytes; i++)
> - data[i] = res->SwI2cCmds[i].Data;
> -
> - dev_dbg(adev->dev, "navi10_i2c_read_data, address = %x, bytes = %d, data :",
> - (uint16_t)address, numbytes);
> -
> - print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE,
> - 8, 1, data, numbytes, false);
> - } else
> - dev_err(adev->dev, "navi10_i2c_read_data - error occurred :%x", ret);
> -
> - return ret;
> -}
> -
> -static int navi10_i2c_write_data(struct i2c_adapter *control,
> - uint8_t address,
> - uint8_t *data,
> - uint32_t numbytes)
> -{
> - uint32_t ret;
> - SwI2cRequest_t req;
> - struct amdgpu_device *adev = to_amdgpu_device(control);
> -
> - if (numbytes > MAX_SW_I2C_COMMANDS) {
> - dev_err(adev->dev, "numbytes requested %d is over max allowed %d\n",
> - numbytes, MAX_SW_I2C_COMMANDS);
> - return -EINVAL;
> - }
> -
> - memset(&req, 0, sizeof(req));
> - navi10_fill_i2c_req(&req, true, address, numbytes, data);
> -
> - mutex_lock(&adev->smu.mutex);
> - ret = smu_cmn_update_table(&adev->smu, SMU_TABLE_I2C_COMMANDS, 0, &req, true);
> - mutex_unlock(&adev->smu.mutex);
> -
> - if (!ret) {
> - dev_dbg(adev->dev, "navi10_i2c_write(), address = %x, bytes = %d , data: ",
> - (uint16_t)address, numbytes);
> -
> - print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_NONE,
> - 8, 1, data, numbytes, false);
> - /*
> - * According to EEPROM spec there is a MAX of 10 ms required for
> - * EEPROM to flush internal RX buffer after STOP was issued at the
> - * end of write transaction. During this time the EEPROM will not be
> - * responsive to any more commands - so wait a bit more.
> - */
> - msleep(10);
> -
> - } else
> - dev_err(adev->dev, "navi10_i2c_write- error occurred :%x", ret);
> -
> - return ret;
> -}
> -
> -static int navi10_i2c_xfer(struct i2c_adapter *i2c_adap,
> - struct i2c_msg *msgs, int num)
> -{
> - uint32_t i, j, ret, data_size, data_chunk_size, next_eeprom_addr = 0;
> - uint8_t *data_ptr, data_chunk[MAX_SW_I2C_COMMANDS] = { 0 };
> -
> - for (i = 0; i < num; i++) {
> - /*
> - * SMU interface allows at most MAX_SW_I2C_COMMANDS bytes of data at
> - * once and hence the data needs to be spliced into chunks and sent each
> - * chunk separately
> - */
> - data_size = msgs[i].len - 2;
> - data_chunk_size = MAX_SW_I2C_COMMANDS - 2;
> - next_eeprom_addr = (msgs[i].buf[0] << 8 & 0xff00) | (msgs[i].buf[1] & 0xff);
> - data_ptr = msgs[i].buf + 2;
> -
> - for (j = 0; j < data_size / data_chunk_size; j++) {
> - /* Insert the EEPROM dest addess, bits 0-15 */
> - data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff);
> - data_chunk[1] = (next_eeprom_addr & 0xff);
> -
> - if (msgs[i].flags & I2C_M_RD) {
> - ret = navi10_i2c_read_data(i2c_adap,
> - (uint8_t)msgs[i].addr,
> - data_chunk, MAX_SW_I2C_COMMANDS);
> -
> - memcpy(data_ptr, data_chunk + 2, data_chunk_size);
> - } else {
> -
> - memcpy(data_chunk + 2, data_ptr, data_chunk_size);
> -
> - ret = navi10_i2c_write_data(i2c_adap,
> - (uint8_t)msgs[i].addr,
> - data_chunk, MAX_SW_I2C_COMMANDS);
> - }
> -
> - if (ret) {
> - num = -EIO;
> - goto fail;
> - }
> -
> - next_eeprom_addr += data_chunk_size;
> - data_ptr += data_chunk_size;
> - }
> -
> - if (data_size % data_chunk_size) {
> - data_chunk[0] = ((next_eeprom_addr >> 8) & 0xff);
> - data_chunk[1] = (next_eeprom_addr & 0xff);
> -
> - if (msgs[i].flags & I2C_M_RD) {
> - ret = navi10_i2c_read_data(i2c_adap,
> - (uint8_t)msgs[i].addr,
> - data_chunk, (data_size % data_chunk_size) + 2);
> -
> - memcpy(data_ptr, data_chunk + 2, data_size % data_chunk_size);
> - } else {
> - memcpy(data_chunk + 2, data_ptr, data_size % data_chunk_size);
> -
> - ret = navi10_i2c_write_data(i2c_adap,
> - (uint8_t)msgs[i].addr,
> - data_chunk, (data_size % data_chunk_size) + 2);
> - }
> -
> - if (ret) {
> - num = -EIO;
> - goto fail;
> - }
> - }
> - }
> -
> -fail:
> - return num;
> -}
> -
> -static u32 navi10_i2c_func(struct i2c_adapter *adap)
> -{
> - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> -}
> -
> -
> -static const struct i2c_algorithm navi10_i2c_algo = {
> - .master_xfer = navi10_i2c_xfer,
> - .functionality = navi10_i2c_func,
> -};
> -
> static ssize_t navi10_get_gpu_metrics(struct smu_context *smu,
> void **table)
> {
> --
> 2.25.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

\
 
 \ /
  Last update: 2020-12-01 00:29    [W:0.294 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site