lkml.org 
[lkml]   [2020]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/6] dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
Date
Quite similar to the regulator bindings found in "rockchip-pcie-host.txt",
this allows optional regulators to be attached and controlled by the
PCIe RC driver.

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
---
.../devicetree/bindings/pci/brcm,stb-pcie.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 807694b4f41f..baacc3d7ec87 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -85,6 +85,18 @@ properties:
minItems: 1
maxItems: 3

+ vpcie12v-supply:
+ description: 12v regulator phandle for the endpoint device
+
+ vpcie3v3-supply:
+ description: 3.3v regulator phandle for the endpoint device
+
+ vpcie1v8-supply:
+ description: 1.8v regulator phandle for the endpoint device
+
+ vpcie0v9-supply:
+ description: 0.9v regulator phandle for the endpoint device
+
required:
- reg
- ranges
--
2.17.1
[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2020-11-30 22:14    [W:0.241 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site