lkml.org 
[lkml]   [2020]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 2/2] net: xilinx: axiethernet: Enable dynamic MDIO MDC
Date
From: Clayton Rayment <clayton.rayment@xilinx.com>

MDIO spec does not require an MDC at all times, only when MDIO
transactions are occurring. This patch allows the xilinx_axienet
driver to disable the MDC when not in use, and re-enable it when
needed. It also simplifies the driver by removing MDC disable
and enable in device reset sequence.

Signed-off-by: Clayton Rayment <clayton.rayment@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 21 ++++--------------
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 27 ++++++++++++++++++-----
2 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 529c167..6fea980 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1049,20 +1049,13 @@ static int axienet_open(struct net_device *ndev)

dev_dbg(&ndev->dev, "axienet_open()\n");

- /* Disable the MDIO interface till Axi Ethernet Reset is completed.
- * When we do an Axi Ethernet reset, it resets the complete core
- * including the MDIO. MDIO must be disabled before resetting
- * and re-enabled afterwards.
+ /* When we do an Axi Ethernet reset, it resets the complete core
+ * including the MDIO. MDIO must be disabled before resetting.
* Hold MDIO bus lock to avoid MDIO accesses during the reset.
*/
mutex_lock(&lp->mii_bus->mdio_lock);
- axienet_mdio_disable(lp);
ret = axienet_device_reset(ndev);
- if (ret == 0)
- ret = axienet_mdio_enable(lp);
mutex_unlock(&lp->mii_bus->mdio_lock);
- if (ret < 0)
- return ret;

ret = phylink_of_phy_connect(lp->phylink, lp->dev->of_node, 0);
if (ret) {
@@ -1156,9 +1149,7 @@ static int axienet_stop(struct net_device *ndev)

/* Do a reset to ensure DMA is really stopped */
mutex_lock(&lp->mii_bus->mdio_lock);
- axienet_mdio_disable(lp);
__axienet_device_reset(lp);
- axienet_mdio_enable(lp);
mutex_unlock(&lp->mii_bus->mdio_lock);

cancel_work_sync(&lp->dma_err_task);
@@ -1669,16 +1660,12 @@ static void axienet_dma_err_handler(struct work_struct *work)

axienet_setoptions(ndev, lp->options &
~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
- /* Disable the MDIO interface till Axi Ethernet Reset is completed.
- * When we do an Axi Ethernet reset, it resets the complete core
- * including the MDIO. MDIO must be disabled before resetting
- * and re-enabled afterwards.
+ /* When we do an Axi Ethernet reset, it resets the complete core
+ * including the MDIO. MDIO must be disabled before resetting.
* Hold MDIO bus lock to avoid MDIO accesses during the reset.
*/
mutex_lock(&lp->mii_bus->mdio_lock);
- axienet_mdio_disable(lp);
__axienet_device_reset(lp);
- axienet_mdio_enable(lp);
mutex_unlock(&lp->mii_bus->mdio_lock);

for (i = 0; i < lp->tx_bd_num; i++) {
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 84d06bf..9c014ce 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -65,9 +65,13 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
int ret;
struct axienet_local *lp = bus->priv;

+ axienet_mdio_mdc_enable(lp);
+
ret = axienet_mdio_wait_until_ready(lp);
- if (ret < 0)
+ if (ret < 0) {
+ axienet_mdio_mdc_disable(lp);
return ret;
+ }

axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
(((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
@@ -78,14 +82,17 @@ static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
XAE_MDIO_MCR_OP_READ_MASK));

ret = axienet_mdio_wait_until_ready(lp);
- if (ret < 0)
+ if (ret < 0) {
+ axienet_mdio_mdc_disable(lp);
return ret;
+ }

rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF;

dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n",
phy_id, reg, rc);

+ axienet_mdio_mdc_disable(lp);
return rc;
}

@@ -111,9 +118,13 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
phy_id, reg, val);

+ axienet_mdio_mdc_enable(lp);
+
ret = axienet_mdio_wait_until_ready(lp);
- if (ret < 0)
+ if (ret < 0) {
+ axienet_mdio_mdc_disable(lp);
return ret;
+ }

axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val);
axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
@@ -125,8 +136,11 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
XAE_MDIO_MCR_OP_WRITE_MASK));

ret = axienet_mdio_wait_until_ready(lp);
- if (ret < 0)
+ if (ret < 0) {
+ axienet_mdio_mdc_disable(lp);
return ret;
+ }
+ axienet_mdio_mdc_disable(lp);
return 0;
}

@@ -230,8 +244,8 @@ void axienet_mdio_disable(struct axienet_local *lp)
* Return: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
* mdiobus_alloc (to allocate memory for mii bus structure) fails.
*
- * Sets up the MDIO interface by initializing the MDIO clock and enabling the
- * MDIO interface in hardware. Register the MDIO interface.
+ * Sets up the MDIO interface by initializing the MDIO clock.
+ * Register the MDIO interface.
**/
int axienet_mdio_setup(struct axienet_local *lp)
{
@@ -265,6 +279,7 @@ int axienet_mdio_setup(struct axienet_local *lp)
lp->mii_bus = NULL;
return ret;
}
+ axienet_mdio_mdc_disable(lp);
return 0;
}

--
2.7.4
\
 
 \ /
  Last update: 2020-11-03 12:27    [W:0.062 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site