lkml.org 
[lkml]   [2020]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] docs: ABI: sysfs-class-firmware-attributes: solve some warnings
From
Date
Hi,

On 10/29/20 10:31 AM, Mauro Carvalho Chehab wrote:
> The Description: tag is missing on some places, causing
> scripts/get_abi.pl warnings:
>
> Warning: file Documentation/ABI/testing/sysfs-class-firmware-attributes#172:
> What '/sys/class/firmware-attributes/*/authentication/' doesn't have a description
>
> Also, some warnings are produced when generating html documentation:
>
> .../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Title underline too short.
>
> Dell specific class extensions
> --------------------------
> .../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Unexpected indentation.
> .../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Unexpected indentation.
> .../Documentation/ABI/testing/sysfs-class-firmware-attributes:2: WARNING: Block quote ends without a blank line; unexpected unindent.
> .../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Unexpected indentation.
> .../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Unexpected indentation.
> .../Documentation/ABI/testing/sysfs-class-firmware-attributes:173: WARNING: Block quote ends without a blank line; unexpected unindent.
> .../Documentation/ABI/testing/sysfs-class-firmware-attributes:111: WARNING: Inline emphasis start-string without end-string.
>
> Address the warnings, making it to produce the expected
> output for the documentation ABI.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Thank you for your patch, I've applied this patch to my review-hans
branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Note it will show up in my review-hans branch once I've pushed my
local branch there, which might take a while.

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Regards,

Hans


> ---
> .../testing/sysfs-class-firmware-attributes | 138 +++++++++++-------
> 1 file changed, 86 insertions(+), 52 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes
> index 04a15c72e883..8ea59fea4709 100644
> --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes
> +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes
> @@ -12,17 +12,20 @@ Description:
> Unless otherwise specified in an attribute description all attributes are optional
> and will accept UTF-8 input.
>
> - type: A file that can be read to obtain the type of attribute. This attribute is
> - mandatory.
> + type:
> + A file that can be read to obtain the type of attribute.
> + This attribute is mandatory.
>
> The following are known types:
> +
> - enumeration: a set of pre-defined valid values
> - integer: a range of numerical values
> - string
>
> All attribute types support the following values:
>
> - current_value: A file that can be read to obtain the current
> + current_value:
> + A file that can be read to obtain the current
> value of the <attr>.
>
> This file can also be written to in order to update the value of a
> @@ -30,59 +33,71 @@ Description:
>
> This attribute is mandatory.
>
> - default_value: A file that can be read to obtain the default
> + default_value:
> + A file that can be read to obtain the default
> value of the <attr>
>
> - display_name: A file that can be read to obtain a user friendly
> + display_name:
> + A file that can be read to obtain a user friendly
> description of the at <attr>
>
> - display_name_language_code: A file that can be read to obtain
> + display_name_language_code:
> + A file that can be read to obtain
> the IETF language tag corresponding to the
> "display_name" of the <attr>
>
> "enumeration"-type specific properties:
>
> - possible_values: A file that can be read to obtain the possible
> + possible_values:
> + A file that can be read to obtain the possible
> values of the <attr>. Values are separated using
> semi-colon (``;``).
>
> "integer"-type specific properties:
>
> - min_value: A file that can be read to obtain the lower
> + min_value:
> + A file that can be read to obtain the lower
> bound value of the <attr>
>
> - max_value: A file that can be read to obtain the upper
> + max_value:
> + A file that can be read to obtain the upper
> bound value of the <attr>
>
> - scalar_increment: A file that can be read to obtain the scalar value used for
> + scalar_increment:
> + A file that can be read to obtain the scalar value used for
> increments of current_value this attribute accepts.
>
> "string"-type specific properties:
>
> - max_length: A file that can be read to obtain the maximum
> + max_length:
> + A file that can be read to obtain the maximum
> length value of the <attr>
>
> - min_length: A file that can be read to obtain the minimum
> + min_length:
> + A file that can be read to obtain the minimum
> length value of the <attr>
>
> Dell specific class extensions
> - --------------------------
> + ------------------------------
>
> On Dell systems the following additional attributes are available:
>
> - dell_modifier: A file that can be read to obtain attribute-level
> + dell_modifier:
> + A file that can be read to obtain attribute-level
> dependency rule. It says an attribute X will become read-only or
> suppressed, if/if-not attribute Y is configured.
>
> - modifier rules can be in following format:
> - [ReadOnlyIf:<attribute>=<value>]
> - [ReadOnlyIfNot:<attribute>=<value>]
> - [SuppressIf:<attribute>=<value>]
> - [SuppressIfNot:<attribute>=<value>]
> + modifier rules can be in following format::
>
> - For example:
> - AutoOnFri/dell_modifier has value,
> - [SuppressIfNot:AutoOn=SelectDays]
> + [ReadOnlyIf:<attribute>=<value>]
> + [ReadOnlyIfNot:<attribute>=<value>]
> + [SuppressIf:<attribute>=<value>]
> + [SuppressIfNot:<attribute>=<value>]
> +
> + For example::
> +
> + AutoOnFri/dell_modifier has value,
> + [SuppressIfNot:AutoOn=SelectDays]
>
> This means AutoOnFri will be suppressed in BIOS setup if AutoOn
> attribute is not "SelectDays" and its value will not be effective
> @@ -90,18 +105,22 @@ Description:
>
> Enumeration attributes also support the following:
>
> - dell_value_modifier: A file that can be read to obtain value-level dependency.
> + dell_value_modifier:
> + A file that can be read to obtain value-level dependency.
> This file is similar to dell_modifier but here, an
> attribute's current value will be forcefully changed based
> dependent attributes value.
>
> - dell_value_modifier rules can be in following format:
> - <value>[ForceIf:<attribute>=<value>]
> - <value>[ForceIfNot:<attribute>=<value>]
> + dell_value_modifier rules can be in following format::
> +
> + <value>[ForceIf:<attribute>=<value>]
> + <value>[ForceIfNot:<attribute>=<value>]
> +
> + For example:
> +
> + LegacyOrom/dell_value_modifier has value:
> + Disabled[ForceIf:SecureBoot=Enabled]
>
> - For example,
> - LegacyOrom/dell_value_modifier has value:
> - Disabled[ForceIf:SecureBoot=Enabled]
> This means LegacyOrom's current value will be forced to
> "Disabled" in BIOS setup if SecureBoot is Enabled and its
> value will not be effective through sysfs until this rule is
> @@ -113,12 +132,13 @@ KernelVersion: 5.11
> Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
> Mario Limonciello <mario.limonciello@dell.com>,
> Prasanth KSR <prasanth.ksr@dell.com>
> -
> +Description:
> Devices support various authentication mechanisms which can be exposed
> as a separate configuration object.
>
> For example a "BIOS Admin" password and "System" Password can be set,
> reset or cleared using these attributes.
> +
> - An "Admin" password is used for preventing modification to the BIOS
> settings.
> - A "System" password is required to boot a machine.
> @@ -126,39 +146,50 @@ Contact: Divya Bharathi <Divya.Bharathi@Dell.com>,
> Change in any of these two authentication methods will also generate an
> uevent KOBJ_CHANGE.
>
> - is_enabled: A file that can be read to obtain a 0/1 flag to see if
> + is_enabled:
> + A file that can be read to obtain a 0/1 flag to see if
> <attr> authentication is enabled.
> This attribute is mandatory.
>
> - role: The type of authentication used.
> + role:
> + The type of authentication used.
> This attribute is mandatory.
> +
> Known types:
> - bios-admin: Representing BIOS administrator password
> - power-on: Representing a password required to use
> - the system
> + bios-admin:
> + Representing BIOS administrator password
> + power-on:
> + Representing a password required to use
> + the system
>
> - mechanism: The means of authentication. This attribute is mandatory.
> + mechanism:
> + The means of authentication. This attribute is mandatory.
> Only supported type currently is "password".
>
> - max_password_length: A file that can be read to obtain the
> + max_password_length:
> + A file that can be read to obtain the
> maximum length of the Password
>
> - min_password_length: A file that can be read to obtain the
> + min_password_length:
> + A file that can be read to obtain the
> minimum length of the Password
>
> - current_password: A write only value used for privileged access such as
> + current_password:
> + A write only value used for privileged access such as
> setting attributes when a system or admin password is set
> or resetting to a new password
>
> This attribute is mandatory when mechanism == "password".
>
> - new_password: A write only value that when used in tandem with
> + new_password:
> + A write only value that when used in tandem with
> current_password will reset a system or admin password.
>
> Note, password management is session specific. If Admin password is set,
> same password must be written into current_password file (required for
> password-validation) and must be cleared once the session is over.
> - For example:
> + For example::
> +
> echo "password" > current_password
> echo "disabled" > TouchScreen/current_value
> echo "" > current_password
> @@ -180,12 +211,15 @@ Description:
> pending BIOS attribute changes. Also, an uevent_KOBJ_CHANGE is
> generated when it changes to 1.
>
> - 0: All BIOS attributes setting are current
> - 1: A reboot is necessary to get pending BIOS attribute changes
> - applied
> + == =========================================
> + 0 All BIOS attributes setting are current
> + 1 A reboot is necessary to get pending BIOS
> + attribute changes applied
> + == =========================================
>
> Note, userspace applications need to follow below steps for efficient
> BIOS management,
> +
> 1. Check if admin password is set. If yes, follow session method for
> password management as briefed under authentication section above.
> 2. Before setting any attribute, check if it has any modifiers
> @@ -208,17 +242,17 @@ Description:
>
> Reading from it returns a list of supported options encoded as:
>
> - 'builtinsafe' (Built in safe configuration profile)
> - 'lastknowngood' (Last known good saved configuration profile)
> - 'factory' (Default factory settings configuration profile)
> - 'custom' (Custom saved configuration profile)
> + - 'builtinsafe' (Built in safe configuration profile)
> + - 'lastknowngood' (Last known good saved configuration profile)
> + - 'factory' (Default factory settings configuration profile)
> + - 'custom' (Custom saved configuration profile)
>
> The currently selected option is printed in square brackets as
> - shown below:
> + shown below::
>
> - # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios
> - # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios
> - # builtinsafe lastknowngood [factory] custom
> + # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios
> + # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios
> + # builtinsafe lastknowngood [factory] custom
>
> Note that any changes to this attribute requires a reboot
> for changes to take effect.
>

\
 
 \ /
  Last update: 2020-11-03 10:36    [W:0.100 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site