lkml.org 
[lkml]   [2020]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND] [PATCH 1/2] iio: adc: qcom-spmi-vadc: Use right ratiometric range for 8998,660,845
On Sat, 26 Sep 2020 19:18:34 +0200
kholk11@gmail.com wrote:

> From: AngeloGioacchino Del Regno <kholk11@gmail.com>
>
> The ratiometric range for MSM8998, SDM630/636/660 and SDM845 is 1875mV
> instead of the standard 1800mV: address this by adding a new compatible
> "qcom,spmi-vadc-8998" and assigning the different range to the machines
> declaring this one.
>
> Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>

@Bjorn

Could you take a quick look at this pair of patches. It's been sat in
my queue waiting for appropriate review for rather too long!
(mainly because I've been rather lax in checking on status of older
series really - sorry about that :(

Thanks

Jonathan

> ---
> drivers/iio/adc/qcom-spmi-vadc.c | 10 +++++++++-
> drivers/iio/adc/qcom-vadc-common.h | 1 +
> 2 files changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
> index b0388f8a69f4..59a94ea7bf78 100644
> --- a/drivers/iio/adc/qcom-spmi-vadc.c
> +++ b/drivers/iio/adc/qcom-spmi-vadc.c
> @@ -101,6 +101,7 @@ struct vadc_channel_prop {
> * @dev: pointer to struct device.
> * @base: base address for the ADC peripheral.
> * @nchannels: number of VADC channels.
> + * @ratio_range: ratiometric range for ref points.
> * @chan_props: array of VADC channel properties.
> * @iio_chans: array of IIO channels specification.
> * @are_ref_measured: are reference points measured.
> @@ -114,6 +115,7 @@ struct vadc_priv {
> struct device *dev;
> u16 base;
> unsigned int nchannels;
> + unsigned int ratio_range;
> struct vadc_channel_prop *chan_props;
> struct iio_chan_spec *iio_chans;
> bool are_ref_measured;
> @@ -355,7 +357,7 @@ static int vadc_measure_ref_points(struct vadc_priv *vadc)
> u16 read_1, read_2;
> int ret;
>
> - vadc->graph[VADC_CALIB_RATIOMETRIC].dx = VADC_RATIOMETRIC_RANGE;
> + vadc->graph[VADC_CALIB_RATIOMETRIC].dx = vadc->ratio_range;
> vadc->graph[VADC_CALIB_ABSOLUTE].dx = VADC_ABSOLUTE_RANGE_UV;
>
> prop = vadc_get_channel(vadc, VADC_REF_1250MV);
> @@ -885,6 +887,11 @@ static int vadc_probe(struct platform_device *pdev)
> if (ret)
> return ret;
>
> + if (of_device_is_compatible(node, "qcom,spmi-vadc-8998"))
> + vadc->ratio_range = VADC_RATIOMETRIC_RANGE_8998;
> + else
> + vadc->ratio_range = VADC_RATIOMETRIC_RANGE;
> +
> irq_eoc = platform_get_irq(pdev, 0);
> if (irq_eoc < 0) {
> if (irq_eoc == -EPROBE_DEFER || irq_eoc == -EINVAL)
> @@ -918,6 +925,7 @@ static int vadc_probe(struct platform_device *pdev)
>
> static const struct of_device_id vadc_match_table[] = {
> { .compatible = "qcom,spmi-vadc" },
> + { .compatible = "qcom-spmi-vadc-8998" },
> { }
> };
> MODULE_DEVICE_TABLE(of, vadc_match_table);
> diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
> index 17b2fc4d8bf2..b10d5fd59034 100644
> --- a/drivers/iio/adc/qcom-vadc-common.h
> +++ b/drivers/iio/adc/qcom-vadc-common.h
> @@ -16,6 +16,7 @@
>
> #define VADC_ABSOLUTE_RANGE_UV 625000
> #define VADC_RATIOMETRIC_RANGE 1800
> +#define VADC_RATIOMETRIC_RANGE_8998 1875
>
> #define VADC_DEF_PRESCALING 0 /* 1:1 */
> #define VADC_DEF_DECIMATION 0 /* 512 */

\
 
 \ /
  Last update: 2020-11-29 14:15    [W:0.758 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site