lkml.org 
[lkml]   [2020]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] tpm_tis: Disable interrupts on ThinkPad T490s
From
Date
Hi All,

On 11/29/20 4:23 AM, Jarkko Sakkinen wrote:
> On Tue, Nov 24, 2020 at 10:45:01PM +0100, Hans de Goede wrote:
>> Hi,
>>
>> On 11/24/20 6:52 PM, Jerry Snitselaar wrote:
>>>
>>> Jarkko Sakkinen @ 2020-11-23 20:26 MST:
>>>
>>>> On Wed, Nov 18, 2020 at 11:36:20PM -0700, Jerry Snitselaar wrote:
>>>>>
>>>>> Matthew Garrett @ 2020-10-15 15:39 MST:
>>>>>
>>>>>> On Thu, Oct 15, 2020 at 2:44 PM Jerry Snitselaar <jsnitsel@redhat.com> wrote:
>>>>>>>
>>>>>>> There is a misconfiguration in the bios of the gpio pin used for the
>>>>>>> interrupt in the T490s. When interrupts are enabled in the tpm_tis
>>>>>>> driver code this results in an interrupt storm. This was initially
>>>>>>> reported when we attempted to enable the interrupt code in the tpm_tis
>>>>>>> driver, which previously wasn't setting a flag to enable it. Due to
>>>>>>> the reports of the interrupt storm that code was reverted and we went back
>>>>>>> to polling instead of using interrupts. Now that we know the T490s problem
>>>>>>> is a firmware issue, add code to check if the system is a T490s and
>>>>>>> disable interrupts if that is the case. This will allow us to enable
>>>>>>> interrupts for everyone else. If the user has a fixed bios they can
>>>>>>> force the enabling of interrupts with tpm_tis.interrupts=1 on the
>>>>>>> kernel command line.
>>>>>>
>>>>>> I think an implication of this is that systems haven't been
>>>>>> well-tested with interrupts enabled. In general when we've found a
>>>>>> firmware issue in one place it ends up happening elsewhere as well, so
>>>>>> it wouldn't surprise me if there are other machines that will also be
>>>>>> unhappy with interrupts enabled. Would it be possible to automatically
>>>>>> detect this case (eg, if we get more than a certain number of
>>>>>> interrupts in a certain timeframe immediately after enabling the
>>>>>> interrupt) and automatically fall back to polling in that case? It
>>>>>> would also mean that users with fixed firmware wouldn't need to pass a
>>>>>> parameter.
>>>>>
>>>>> I believe Matthew is correct here. I found another system today
>>>>> with completely different vendor for both the system and the tpm chip.
>>>>> In addition another Lenovo model, the L490, has the issue.
>>>>>
>>>>> This initial attempt at a solution like Matthew suggested works on
>>>>> the system I found today, but I imagine it is all sorts of wrong.
>>>>> In the 2 systems where I've seen it, there are about 100000 interrupts
>>>>> in around 1.5 seconds, and then the irq code shuts down the interrupt
>>>>> because they aren't being handled.
>>>>>
>>>>>
>>>>> diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
>>>>> index 49ae09ac604f..478e9d02a3fa 100644
>>>>> --- a/drivers/char/tpm/tpm_tis_core.c
>>>>> +++ b/drivers/char/tpm/tpm_tis_core.c
>>>>> @@ -27,6 +27,11 @@
>>>>> #include "tpm.h"
>>>>> #include "tpm_tis_core.h"
>>>>>
>>>>> +static unsigned int time_start = 0;
>>>>> +static bool storm_check = true;
>>>>> +static bool storm_killed = false;
>>>>> +static u32 irqs_fired = 0;
>>>>
>>>> Maybe kstat_irqs() would be a better idea than ad hoc stats.
>>>>
>>>
>>> Thanks, yes that would be better.
>>>
>>>>> +
>>>>> static void tpm_tis_clkrun_enable(struct tpm_chip *chip, bool value);
>>>>>
>>>>> static void tpm_tis_enable_interrupt(struct tpm_chip *chip, u8 mask)
>>>>> @@ -464,25 +469,31 @@ static int tpm_tis_send_data(struct tpm_chip *chip, const u8 *buf, size_t len)
>>>>> return rc;
>>>>> }
>>>>>
>>>>> -static void disable_interrupts(struct tpm_chip *chip)
>>>>> +static void __disable_interrupts(struct tpm_chip *chip)
>>>>> {
>>>>> struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>>>>> u32 intmask;
>>>>> int rc;
>>>>>
>>>>> - if (priv->irq == 0)
>>>>> - return;
>>>>> -
>>>>> rc = tpm_tis_read32(priv, TPM_INT_ENABLE(priv->locality), &intmask);
>>>>> if (rc < 0)
>>>>> intmask = 0;
>>>>>
>>>>> intmask &= ~TPM_GLOBAL_INT_ENABLE;
>>>>> rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask);
>>>>> + chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>>>>> +}
>>>>> +
>>>>> +static void disable_interrupts(struct tpm_chip *chip)
>>>>> +{
>>>>> + struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>>>>>
>>>>> + if (priv->irq == 0)
>>>>> + return;
>>>>> +
>>>>> + __disable_interrupts(chip);
>>>>> devm_free_irq(chip->dev.parent, priv->irq, chip);
>>>>> priv->irq = 0;
>>>>> - chip->flags &= ~TPM_CHIP_FLAG_IRQ;
>>>>> }
>>>>>
>>>>> /*
>>>>> @@ -528,6 +539,12 @@ static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
>>>>> int rc, irq;
>>>>> struct tpm_tis_data *priv = dev_get_drvdata(&chip->dev);
>>>>>
>>>>> + if (unlikely(storm_killed)) {
>>>>> + devm_free_irq(chip->dev.parent, priv->irq, chip);
>>>>> + priv->irq = 0;
>>>>> + storm_killed = false;
>>>>> + }
>>>>
>>>> OK this kind of bad solution because if tpm_tis_send() is not called,
>>>> then IRQ is never freed. AFAIK, devres_* do not sleep but use spin
>>>> lock, i.e. you could render out both storm_check and storm_killed.
>>>>
>>>
>>> Is there a way to flag it for freeing later while in an interrupt
>>> context? I'm not sure where to clean it up since devm_free_irq can't be
>>> called in tis_int_handler.
>>
>> You could add a workqueue work-struct just for this and queue that up
>> to do the free when you detect the storm. That will then run pretty much
>> immediately, avoiding the storm going on for (much) longer.
>
> That's sounds feasible.
>
>>> Before diving further into that though, does anyone else have an opinion
>>> on ripping out the irq code, and just using polling? We've been only
>>> polling since 2015 anyways.
>>
>> Given James Bottomley's reply I guess it would be worthwhile to get the
>> storm detection to work.
>
> OK, agreed. I take my words back from a response few minutes ago :-)

:)

To be clear, I think we should give the storm detection a go. Especially
given the problems which James has seen with polling on some TPMs.

But if that turns out to not be feasible I agree we should just either
disable IRQs by default on standard x86 platforms, or just remove the
IRQ support all together.

Regards,

Hans

\
 
 \ /
  Last update: 2020-11-29 12:39    [W:1.096 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site