lkml.org 
[lkml]   [2020]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] devicetree: phy: rockchip-emmc: pulldown property
Date
Update the documentation and add the bool property
enable-strobe-pulldown used to enable the internal pull-down for the
strobe line.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
index e728786f21e0..3e4d2d79a65d 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
@@ -16,6 +16,8 @@ Optional properties:
- drive-impedance-ohm: Specifies the drive impedance in Ohm.
Possible values are 33, 40, 50, 66 and 100.
If not set, the default value of 50 will be applied.
+ - enable-strobe-pulldown: Enable internal pull-down for the strobe line.
+ If not set, pull-down is not used.

Example:

--
2.20.1
\
 
 \ /
  Last update: 2020-11-29 06:47    [W:0.043 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site