lkml.org 
[lkml]   [2020]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v2] dt-bindings: net: correct interrupt flags in examples
From
Date
On 11/27/20 5:27 PM, Jakub Kicinski wrote:
> On Fri, 27 Nov 2020 10:13:01 +0100 Marc Kleine-Budde wrote:
>> On 10/26/20 4:36 PM, Krzysztof Kozlowski wrote:
>>> GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
>>> These are simple defines so they could be used in DTS but they will not
>>> have the same meaning:
>>> 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
>>> 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
>>>
>>> Correct the interrupt flags, assuming the author of the code wanted same
>>> logical behavior behind the name "ACTIVE_xxx", this is:
>>> ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
>>> ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>>> Acked-by: Rob Herring <robh@kernel.org>
>>> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
>>
>> Jakub, can you queue this patch for net/master?
>
> Sure! Are these correct?
>
> Fixes: a1a8b4594f8d ("NFC: pn544: i2c: Add DTS Documentation")
> Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")

ACK:
> Fixes: e3b329221567 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")

Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-28 23:28    [W:0.503 / U:1.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site