[lkml]   [2020]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/3] media: i2c: OV8865 image sensor support
This series adds support for the OV8865 image sensor, as a V4L2 subdev
driver. Although an initial series was submitted by Kévin L'hôpital some
weeks ago, this version is significantly new and should be considered a
new series.

The final patch (not for merge) shows how to enable the OV8865 on the
Banana Pi Camera Board v2 with the Banana Pi M3.

Changes since v2:
- Added link-frequencies endpoint property support;
- Marked avdd-supply as non-optional (no internal regulator);
- Used NULL ctrl ops for pixel rate and link freq;
- Extra cosmetic changes;

Changes since v1:
- Used runtime pm;
- Used assigned-clock-rate;
- Removed clock name;
- Returned closest size in set_fmt;
- Removed unneeded references to v4l2 controls;
- Removed unneeded structure packing attribute;
- Removed i2c device table;
- Dual-licensed bindings;
- Used SPDX tags.



Kévin L'hôpital (1):
ARM: dts: sun8i: a83t: bananapi-m3: Enable MIPI CSI-2 with OV8865

Paul Kocialkowski (2):
dt-bindings: media: i2c: Add OV8865 bindings documentation
media: i2c: Add support for the OV8865 image sensor

.../bindings/media/i2c/ovti,ov8865.yaml | 124 +
arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts | 95 +
drivers/media/i2c/Kconfig | 13 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ov8865.c | 3066 +++++++++++++++++
5 files changed, 3299 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
create mode 100644 drivers/media/i2c/ov8865.c


 \ /
  Last update: 2020-11-28 23:40    [W:0.073 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site