Messages in this thread Patch in this message |  | | From | Paul Kocialkowski <> | Subject | [PATCH v2 09/19] ARM: dts: sunxi: h3/h5: Add CSI controller port for parallel input | Date | Sat, 28 Nov 2020 15:28:29 +0100 |
| |
Since the CSI controller binding is getting a bit more complex due to the addition of MIPI CSI-2 bridge support, make the ports node explicit with the parallel port.
This way, it's clear that the controller only supports parallel interface input and there's no confusion about the port number.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> --- arch/arm/boot/dts/sunxi-h3-h5.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 9be13378d4df..02b698cace6a 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -803,6 +803,15 @@ csi: camera@1cb0000 { pinctrl-names = "default"; pinctrl-0 = <&csi_pins>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi_in_parallel: port@0 { + reg = <0>; + }; + }; }; hdmi: hdmi@1ee0000 { -- 2.29.2
|  |