lkml.org 
[lkml]   [2020]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v2 13/18] arm: dts: owl-s500: Add I2C support
    On Fri, Nov 20, 2020 at 01:56:07AM +0200, Cristian Ciocaltea wrote:
    > Add I2C controller nodes for Actions Semi S500 SoC.
    >
    > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

    Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

    Thanks,
    Mani

    > ---
    > arch/arm/boot/dts/owl-s500.dtsi | 40 +++++++++++++++++++++++++++++++++
    > 1 file changed, 40 insertions(+)
    >
    > diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi
    > index 7af7c9e1119d..55f8b8c2e149 100644
    > --- a/arch/arm/boot/dts/owl-s500.dtsi
    > +++ b/arch/arm/boot/dts/owl-s500.dtsi
    > @@ -193,6 +193,46 @@ cmu: clock-controller@b0160000 {
    > #reset-cells = <1>;
    > };
    >
    > + i2c0: i2c@b0170000 {
    > + compatible = "actions,s500-i2c";
    > + reg = <0xb0170000 0x4000>;
    > + clocks = <&cmu CLK_I2C0>;
    > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > + status = "disabled";
    > + };
    > +
    > + i2c1: i2c@b0174000 {
    > + compatible = "actions,s500-i2c";
    > + reg = <0xb0174000 0x4000>;
    > + clocks = <&cmu CLK_I2C1>;
    > + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > + status = "disabled";
    > + };
    > +
    > + i2c2: i2c@b0178000 {
    > + compatible = "actions,s500-i2c";
    > + reg = <0xb0178000 0x4000>;
    > + clocks = <&cmu CLK_I2C2>;
    > + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > + status = "disabled";
    > + };
    > +
    > + i2c3: i2c@b017c000 {
    > + compatible = "actions,s500-i2c";
    > + reg = <0xb017c000 0x4000>;
    > + clocks = <&cmu CLK_I2C3>;
    > + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
    > + #address-cells = <1>;
    > + #size-cells = <0>;
    > + status = "disabled";
    > + };
    > +
    > timer: timer@b0168000 {
    > compatible = "actions,s500-timer";
    > reg = <0xb0168000 0x8000>;
    > --
    > 2.29.2
    >

    \
     
     \ /
      Last update: 2020-11-28 23:39    [W:3.897 / U:0.720 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site