lkml.org 
[lkml]   [2020]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/5] usb: dwc3: core: Host wake up support from system suspend
Hi,


On 2020-10-28 02:07, Sandeep Maheswaram wrote:
> Avoiding phy powerdown in host mode so that it can be woken up by
> devices.
> Added hs_phy_mode flag to check connection status and set phy mode
> and configure interrupts.
>
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
> drivers/usb/dwc3/core.c | 14 +++-----------
> drivers/usb/dwc3/core.h | 2 ++
> 2 files changed, 5 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index bdf0925..0e4bc1e 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1672,10 +1672,6 @@ static int dwc3_suspend_common(struct dwc3
> *dwc, pm_message_t msg)
> dwc3_core_exit(dwc);
> break;
> case DWC3_GCTL_PRTCAP_HOST:
> - if (!PMSG_IS_AUTO(msg)) {
> - dwc3_core_exit(dwc);
> - break;
> - }


This could be a problem for platforms that don't support runtime_suspend
and rely on dwc3_core_exit to power-down PHY.
IMO you can continue to do dwc3_core_exit() if runtime_pm isn't enabled
for the device.

>
> /* Let controller to suspend HSPHY before PHY driver suspends */
> if (dwc->dis_u2_susphy_quirk ||
> @@ -1733,13 +1729,9 @@ static int dwc3_resume_common(struct dwc3 *dwc,
> pm_message_t msg)
> spin_unlock_irqrestore(&dwc->lock, flags);
> break;
> case DWC3_GCTL_PRTCAP_HOST:
> - if (!PMSG_IS_AUTO(msg)) {
> - ret = dwc3_core_init_for_resume(dwc);
> - if (ret)
> - return ret;
> - dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> - break;
> - }
> +
> + dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
> +
> /* Restore GUSB2PHYCFG bits that were modified in suspend */
> reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
> if (dwc->dis_u2_susphy_quirk)
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 74323b1..da63d4a3 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1101,6 +1101,8 @@ struct dwc3 {
>
> bool phys_ready;
>
> + unsigned int hs_phy_mode;
> +

This change should instead be part of the other patch ?
"usb: dwc3: host: Add suspend_quirk for dwc3 host"


> struct ulpi *ulpi;
> bool ulpi_ready;

\
 
 \ /
  Last update: 2020-11-28 03:36    [W:0.097 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site