lkml.org 
[lkml]   [2020]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] drm: imx: Move fbdev setup to before output polling
On Thu, Nov 26, 2020 at 09:44:02AM +0000, Jonas Mark (BT-FIR/ENG1-Grb) wrote:
> Hi Daniel,
>
> > > Thank you very much for your feedback. We appreciate it.
> > >
> > > > >>> diff --git a/drivers/gpu/drm/imx/imx-drm-core.c
> > > > >>> b/drivers/gpu/drm/imx/imx-drm-core.c
> > > > >>> index 9bf5ad6d18a2..2665040e11c7 100644
> > > > >>> --- a/drivers/gpu/drm/imx/imx-drm-core.c
> > > > >>> +++ b/drivers/gpu/drm/imx/imx-drm-core.c
> > > > >>> @@ -240,14 +240,18 @@ static int imx_drm_bind(struct device *dev)
> > > > >>> legacyfb_depth = 16;
> > > > >>> }
> > > > >>>
> > > > >>> + /*
> > > > >>> + * The generic fbdev has to be setup before enabling output polling.
> > > > >>> + * Otherwise the fbdev client is not ready to handle delayed events.
> > > > >>> + */
> > > > >>> + drm_fbdev_generic_setup(drm, legacyfb_depth);
> > > > >>> +
> > > > >>> drm_kms_helper_poll_init(drm);
> > > > >>>
> > > > >>> ret = drm_dev_register(drm, 0);
> > > > >>> if (ret)
> > > > >>> goto err_poll_fini;
> > > > >>>
> > > > >>> - drm_fbdev_generic_setup(drm, legacyfb_depth);
> > > > >>> -
> > > > >>
> > > > >> This does not work well. fbdev is supposed to be another regular
> > > > >> DRM client. It has to be enabled after registering the DRM device.
> > > > >>
> > > > >> I'd rather improve fbdev or the driver to handle this gracefully.
> > > > >
> > > > > Yeah I'm not understanding the point here. Once fbcon is running,
> > > > > you have a screen. Any fbdev userspace client also should do a
> > > > > modeset first. And if they dont and it's expected uapi for fbdev
> > > > > chardev that the display boots up enabled, then we need to fix
> > > > > that in the fbdev helpers, not through clever reordering in
> > > > > drivers so that a side-effect causes a modeset.
> > > > >
> > > > > Note that this is a bit tricky since fbdev shouldn't take over the
> > > > > screen by default, so we'd need to delay this until first open of
> > > > > /dev/fb0. And we should probably also delay the hotplug handling
> > > > > until the first open. fbcon also fake-opens the fbdev file, so
> > > > > it's the same code path.
> > > >
> > > > As far as I understand the commit message, the problem is that the
> > > > display blanks out after registering the driver. And fbdev somewhat
> > > > mitigates this by doing an early modeset. Users with fbdev disabled
> > > > (most of them in embedded, I guess) would still run into the issue
> > > > until userspace makes a modeset.
> > > >
> > > > Mark, if that's the case, an option might be to pick up the device
> > > > settings instead of calling drm_mode_config_reset(). The driver
> > > > would then continue to display whatever is on the screen.
> > >
> > > We are started using fbdev in our embedded application with Linux
> > > 3.10, later updated to 4.14 and are now in the process of updating to
> > > 5.4. So far the uapi appeared to us as if we could rely on an already
> > > enabled fbdev. That is, none of our applications does a modeset.
> > >
> > > When switching to 5.4 we noticed that the fbdev uapi changed. That is,
> > > the LCD is switched off until it is explicitly enabled. It could be
> > > enabled by writing to /sys/class/graphics/fb0/blank.
> > >
> > > You are right, we are not using fbcon. fbcon will still enable the LCD
> > > but in our embedded domain we have it disabled because we must not show a
> > console.
> > >
> > > Do we understand your proposal correctly to replace the call to
> > > drm_mode_config_reset() in imx_drm_bind() [imx-drm-core.c] with
> > > picking up the device settings instead?
> > >
> > > https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Felix
> > > ir.bootlin.com%2Flinux%2Fv5.10-
> > rc4%2Fsource%2Fdrivers%2Fgpu%2Fdrm%2Fim
> > > x%2Fimx-drm-
> > core.c%23L231&data=04%7C01%7CMark.Jonas%40de.bosch.com
> > >
> > %7C9bbf5ede27ed40be9aaa08d88bac0c53%7C0ae51e1907c84e4bbb6d648ee
> > 58410f4
> > >
> > %7C0%7C0%7C637412918338819509%7CUnknown%7CTWFpbGZsb3d8eyJ
> > WIjoiMC4wLjAw
> > >
> > MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sd
> > ata=68
> > >
> > 1kOSAs2XsI1l4sOJ7j5UAGkAMciR78ma%2FgbD5jR98%3D&reserved=0
> > >
> > > We are a little clueless right now: How do we pick up the device settings?
> >
> > Nope, not what I had in mind.
> >
> > Instead intercept the fb_ops->open call and in there if it's a userspace open
> > (user parameter of the callback tells you that) and kms is not in use, then try to
> > light up the display for the fbdev userspace to use. drm fbdev helpers already
> > have that callback as drm_fbdev_fb_open(). I think you could try and just call
> > drm_fbdev_client_hotplug directly, that should do the trick. Or maybe calling
> > drm_fb_helper_dpms is the better option, not sure. fbmem.c seems to not store
> > any blanking state at all, so this is probably all ill-defined.
> >
> > Important part is to do this only for the user fb_open case, since fbcon will do its
> > own thing too.
> >
> > Plus I guess we need to document that this is the uapi we're having for fbdev
> > clients, so ideally this should be cc'ed widely so we can get some acks from
> > former fbdev maintainers.
> >
> > Also ideally we'd have an igt for this uapi to make sure it never breaks again.
> > Something like:
> > 1. open the kms driver for this, make sure display is completely off.
> > 2. close kms file
> > 3. open fbdev file
> > 4. check (through opening kms side again) that the display has been enabled.
> >
> > See
> > https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdri.freede
> > sktop.org%2Fdocs%2Fdrm%2Fgpu%2Fdrm-uapi.html%23validating-changes-
> > with-
> > igt&data=04%7C01%7CMark.Jonas%40de.bosch.com%7C9bbf5ede27ed4
> > 0be9aaa08d88bac0c53%7C0ae51e1907c84e4bbb6d648ee58410f4%7C0%7C0
> > %7C637412918338819509%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLj
> > AwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&am
> > p;sdata=tgdaOJP2wK7eXFmOQlVdUa%2B7CRwZxOx99BCCMNE8iD0%3D&a
> > mp;reserved=0
> > for some details on our validation testing, there's already a very basic fbdev
> > testcase there.
>
> We had a look into the topic and came to the conclusion that we cannot do it
> right now. We are lacking experience in the field and need to keep driving our
> application development.
>
> Thus, with a heavy heart, we will instead implement a workaround which will
> enable the LCD at boot time from user space. What works good for us is writing
> to /sys/class/graphics/fb0/blank.

I think this makes sense, the uapi for fbdev isn't so firmly established
anyway. And it definitely doesn't hurt (at least on drm-kms drivers, where
we no-op out changes that change nothing).

Just in general, if you hit something like this, we're definitely
interested in making fbdev a more well-defined uapi that can be relied
upon a bit more across drivers. 20+ years after it landed, but hey if it
keeps userspace happy, it imo makes sense.
-Daniel

>
> Greetings,
> Mark
>
> Building Technologies, Panel Software Fire (BT-FIR/ENG1-Grb)
> Bosch Sicherheitssysteme GmbH | Postfach 11 11 | 85626 Grasbrunn | GERMANY | www.boschsecurity.com
>
> Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart HRB 23118
> Aufsichtsratsvorsitzender: Christian Fischer; Geschäftsführung: Tanja Rückert, Andreas Bartz, Thomas Quante
>
> 100 Years Bosch Building Technologies 1920-2020

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2020-11-27 15:52    [W:0.092 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site