lkml.org 
[lkml]   [2020]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/3] dt-bindings: media: i2c: Add OV8865 bindings documentation
Hi Sakari,

On Fri 27 Nov 20, 15:52, Sakari Ailus wrote:
> Hi Paul,
>
> On Fri, Nov 13, 2020 at 06:03:42PM +0100, Paul Kocialkowski wrote:
> > This introduces YAML bindings documentation for the OV8865
> > image sensor.
> >
> > Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
> > Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > ---
> > .../bindings/media/i2c/ovti,ov8865.yaml | 120 ++++++++++++++++++
> > 1 file changed, 120 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> > new file mode 100644
> > index 000000000000..47af90d6ebea
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
> > @@ -0,0 +1,120 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: OmniVision OV8865 Image Sensor Device Tree Bindings
> > +
> > +maintainers:
> > + - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > +
> > +properties:
> > + compatible:
> > + const: ovti,ov8865
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: EXTCLK Clock
> > +
> > + assigned-clocks:
> > + maxItems: 1
> > +
> > + assigned-clock-rates:
> > + maxItems: 1
> > +
> > + dvdd-supply:
> > + description: Digital Domain Power Supply
> > +
> > + avdd-supply:
> > + description: Analog Domain Power Supply (internal AVDD is used if missing)
> > +
> > + dovdd-supply:
> > + description: I/O Domain Power Supply
> > +
> > + powerdown-gpios:
> > + maxItems: 1
> > + description: Power Down Pin GPIO Control (active low)
> > +
> > + reset-gpios:
> > + maxItems: 1
> > + description: Reset Pin GPIO Control (active low)
> > +
> > + port:
> > + type: object
> > + description: MIPI CSI-2 transmitter port
> > +
> > + properties:
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + data-lanes:
> > + minItems: 1
> > + maxItems: 4
> > +
> > + required:
> > + - bus-type
> > + - data-lanes
> > + - remote-endpoint
>
> link-frequencies seems to be still missing here (same with the example).

Oh my bad, you're right.

Note that I found an issue in this series (as well as the ov5648 one)
so I will be reposting them anyways (likely later today).

Cheers,

Paul

--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-11-27 15:30    [W:0.057 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site