lkml.org 
[lkml]   [2020]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 01/16] dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller
From
Date
On Fri, 2020-10-30 at 12:36 +0100, Enric Balletbo i Serra wrote:
> The System Control Processor System (SCPSYS) has several power management
> related tasks in the system. Add the bindings to define the power
> domains for the SCPSYS power controller.
>
> Co-developed-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>
> Changes in v4:
> - Fix indentation warnings reported by yamllint
>
> Changes in v3:
> - Use hex for unit-addresses.
> - Define child nodes for nested power domains even are duplicated, but
> more clear than adding a regex scaped to be a valid URI.
>
> Changes in v2:
> - Use generic node names (power-domain).
> - Define valid values for common properties like #power-domain-cells.
>
> .../power/mediatek,power-controller.yaml | 289 ++++++++++++++++++
> 1 file changed, 289 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> new file mode 100644
> index 000000000000..73b8988bd063
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
> @@ -0,0 +1,289 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek Power Domains Controller
> +
> +maintainers:
> + - Weiyi Lu <weiyi.lu@mediatek.com>
> + - Matthias Brugger <mbrugger@suse.com>
> +
> +description: |
> + Mediatek processors include support for multiple power domains which can be
> + powered up/down by software based on different application scenes to save power.
> +
> + IP cores belonging to a power domain should contain a 'power-domains'
> + property that is a phandle for SCPSYS node representing the domain.
> +
> +properties:
> + $nodename:
> + const: power-controller
> +
> + compatible:
> + enum:
> + - mediatek,mt8173-power-controller
> +
> + '#power-domain-cells':
> + const: 1
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> +patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents the power domains within the power controller node as documented
> + in Documentation/devicetree/bindings/power/power-domain.yaml.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + description: |
> + Power domain index. Valid values are defined in:
> + "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled during domain
> + power-up sequencing.
> +
> + clock-names:
> + description: |
> + List of names of clocks, in order to match the power-up sequencing
> + for each power domain we need to group the clocks by name. BASIC
> + clocks need to be enabled before enabling the corresponding power
> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> + SUSBYS clocks need to be enabled before releasing the bus protection,
> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> + In order to follow properly the power-up sequencing, the clocks must
> + be specified by order, adding first the BASIC clocks followed by the
> + SUSBSYS clocks.
> +
> + mediatek,infracfg:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the INFRACFG register range.
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the SMI register range.
> +
> + patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents a power domain child within a power domain parent node.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled during domain
> + power-up sequencing.
> +
> + clock-names:
> + description: |
> + List of names of clocks, in order to match the power-up sequencing
> + for each power domain we need to group the clocks by name. BASIC
> + clocks need to be enabled before enabling the corresponding power
> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> + SUSBYS clocks need to be enabled before releasing the bus protection,
> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> + In order to follow properly the power-up sequencing, the clocks must
> + be specified by order, adding first the BASIC clocks followed by the
> + SUSBSYS clocks.
> +
> + mediatek,infracfg:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the INFRACFG register range.
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the SMI register range.
> +
> + patternProperties:
> + "^power-domain@[0-9a-f]+$":
> + type: object
> + description: |
> + Represents a power domain child within a power domain parent node.
> +
> + properties:
> +
> + '#power-domain-cells':
> + description:
> + Must be 0 for nodes representing a single PM domain and 1 for nodes
> + providing multiple PM domains.
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + A number of phandles to clocks that need to be enabled during domain
> + power-up sequencing.
> +
> + clock-names:
> + description: |
> + List of names of clocks, in order to match the power-up sequencing
> + for each power domain we need to group the clocks by name. BASIC
> + clocks need to be enabled before enabling the corresponding power
> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
> + SUSBYS clocks need to be enabled before releasing the bus protection,
> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
> +
> + In order to follow properly the power-up sequencing, the clocks must
> + be specified by order, adding first the BASIC clocks followed by the
> + SUSBSYS clocks.
> +
> + mediatek,infracfg:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the INFRACFG register range.
> +
> + mediatek,smi:
> + $ref: /schemas/types.yaml#definitions/phandle
> + description: phandle to the device containing the SMI register range.
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> + required:
> + - reg
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8173-clk.h>
> + #include <dt-bindings/power/mt8173-power.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + scpsys: syscon@10006000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0 0x10006000 0 0x1000>;
> +
> + spm: power-controller {
> + compatible = "mediatek,mt8173-power-controller";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <1>;

Hi Enric and Matthias,

I'd like to know whether we could only keep this power-domain-cells
property here and make others optional, which can more directly point
out who is the real power domain provider?

> +
> + /* power domains of the SoC */
> + power-domain@MT8173_POWER_DOMAIN_VDEC {
> + reg = <MT8173_POWER_DOMAIN_VDEC>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_VENC {
> + reg = <MT8173_POWER_DOMAIN_VENC>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>,
> + <&topckgen CLK_TOP_VENC_SEL>;
> + clock-names = "mm", "venc";
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_ISP {
> + reg = <MT8173_POWER_DOMAIN_ISP>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_MM {
> + reg = <MT8173_POWER_DOMAIN_MM>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>;
> + clock-names = "mm";
> + #power-domain-cells = <0>;
> + mediatek,infracfg = <&infracfg>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_VENC_LT {
> + reg = <MT8173_POWER_DOMAIN_VENC_LT>;
> + clocks = <&topckgen CLK_TOP_MM_SEL>,
> + <&topckgen CLK_TOP_VENC_LT_SEL>;
> + clock-names = "mm", "venclt";
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_AUDIO {
> + reg = <MT8173_POWER_DOMAIN_AUDIO>;
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_USB {
> + reg = <MT8173_POWER_DOMAIN_USB>;
> + #power-domain-cells = <0>;
> + };
> + power-domain@MT8173_POWER_DOMAIN_MFG_ASYNC {
> + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
> + clocks = <&clk26m>;
> + clock-names = "mfg";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <1>;
> +
> + power-domain@MT8173_POWER_DOMAIN_MFG_2D {
> + reg = <MT8173_POWER_DOMAIN_MFG_2D>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #power-domain-cells = <1>;
> +
> + power-domain@MT8173_POWER_DOMAIN_MFG {
> + reg = <MT8173_POWER_DOMAIN_MFG>;
> + #power-domain-cells = <0>;
> + mediatek,infracfg = <&infracfg>;
> + };
> + };
> + };
> + };
> + };
> + };

\
 
 \ /
  Last update: 2020-11-27 03:26    [W:0.222 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site