lkml.org 
[lkml]   [2020]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] Add devicetree support for SDX55 Modem and MTP
Date
Hello,

This series adds devicetree support for Qualcomm SDX55 platform and MTP
board. This series functionally depends on Clock support series [1]
which is under review.

With the current devicetree support, the MTP can boot into initramfs
shell.

Thanks,
Mani

[1] https://lore.kernel.org/linux-arm-msm/20201119072714.14460-1-manivannan.sadhasivam@linaro.org/

Changes in v3:

* Removed pll_test clock and used numbers instead of enums for GCC clock
so that this series can be applied without gcc patches.

Changes in v2:

* Incorporated review comments from Bjorn. Mostly minor changes.

Manivannan Sadhasivam (1):
ARM: dts: qcom: Add SDX55 platform and MTP board support

Vinod Koul (1):
dt-bindings: arm: qcom: Document SDX55 platform and boards

.../devicetree/bindings/arm/qcom.yaml | 6 +
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/qcom-sdx55-mtp.dts | 27 +++
arch/arm/boot/dts/qcom-sdx55.dtsi | 193 ++++++++++++++++++
4 files changed, 228 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-sdx55-mtp.dts
create mode 100644 arch/arm/boot/dts/qcom-sdx55.dtsi

--
2.25.1

\
 
 \ /
  Last update: 2020-11-26 09:33    [W:0.048 / U:2.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site